Profile

Hyoung Seop Kim 사진
Profile.
Name Hyoung Seop Kim
Organization Dept of Materials Science & Enginrg
Telephone 279-2150
E-mail hskim@postech.ac.kr
Homepage http://snmpl.postech.ac.kr/

Education

  • 1988.03 ~ 1992.02 서울대학교 (박사-금속공학과)
  • 1986.03 ~ 1988.02 서울대학교 (석사-금속공학과)
  • 1982.03 ~ 1986.02 서울대학교 (학사-금속공학과)

Career

  • 2006.04 ~ 2008.08 : 충남대학교
  • 2001.04 ~ 2006.03 : 충남대학교
  • 1997.04 ~ 2001.03 : 충남대학교
  • 1995.03 ~ 1997.03 : 충남대학교 나노공학부
  • 1994.03 ~ 1995.03 : 고등기술연구원
  • 1992.03 ~ 1994.05 : 동부제강
  • 1988.03 ~ 1992.02 : 서울대학교
  • 1986.03 ~ 1988.02 : 서울대학교

Profession

Journal Papers

International

  • High-temperature tensile deformation behavior of hot rolled CrMnFeCoNi high-entropy alloy, JOURNAL OF ALLOYS AND COMPOUNDS, , 730, 242-248 (2018)
  • Effect of Target-Fixture Geometry on Shock-Wave Compacted Copper Powders, METALS AND MATERIALS INTERNATIONAL, , 24, 84-94 (2018)
  • Effects of homogenization temperature on cracking during cold rolling of Al0.5CoCrFeMnNi high-entropy alloy, MATERIALS CHEMISTRY AND PHYSICS, , 210, 187-191 (2018)
  • Single-roll angular-rolling: A new continuous severe plastic deformation process for metal sheets, SCRIPTA MATERIALIA, , 146, 204-207 (2018)
  • Impact Toughness of Ultrafine-Grained Commercially Pure Titanium for Medical Application , ADVANCED ENGINEERING MATERIALS, , , - (2018)
  • Influence of Friction Stir Processing Parameters on the Microstructure of Aluminum Foams, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, , , - (2018)
  • Stretchability and drawability of twinning-induced plasticity steel-cored layer steel sheets (vol 250, pg 357, 2017), JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 252, 279-279 (2018)
  • Prediction of hole expansion ratio for various steel sheets based on uniaxial tensile properties, METALS AND MATERIALS INTERNATIONAL, , 24, 187-194 (2018)
  • High-Entropy Alloys: Potential Candidates for High-Temperature Applications – An Overview, ADVANCED ENGINEERING MATERIALS, , 20, 1700645-1700645 (2018)
  • Three-dimensional microstructure modeling of particulate composites using statistical synthetic structure and its thermo-mechanical finite element analysis, COMPUTATIONAL MATERIALS SCIENCE, , 126, 265-271 (2017)
  • Effect of coarse precipitates on surface roughening of an FCC polycrystalline material using crystal plasticity, COMPUTATIONAL MATERIALS SCIENCE, , 126, 121-131 (2017)
  • Outstanding mechanical properties of high-pressure torsion processed multiscale TWIP-cored three layer steel sheet (vol 123, pg 122, 2016), SCRIPTA MATERIALIA, , 128, 113-113 (2017)
  • Finite-Element and Experimental Analyses on the Formability of Steel Sheets Produced by Compact Endless Cast and Rolling, Metallurgical and Materials Transactions A, , 48, 1021-1032 (2017)
  • Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper, Materials Science and Engineering A, , 684, 567-576 (2017)
  • Effect of Initial Grain Size on the Microstructure and Mechanical Properties of High-Pressure Torsion Processed Twinning-Induced Plasticity Steels, Materials Science & Engineering A, , 682, 164-167 (2017)
  • Thermally activated deformation and the rate controlling mechanism in CoCrFeMnNi high entropy alloy, Materials Science and Engineering: A, , 682, 569-576 (2017)
  • Mechanical and biological behavior of ultrafine grained Ti alloy aneurysm clip processed using high-pressure torsion, Journal of the Mechanical Behavior of Biomedical Materials, , 68, 203-209 (2017)
  • Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing,, Materials Science & Engineering A, , 682, 691-697 (2017)
  • Structure and properties of ultrafine-grained CoCrFeMnNi high-entropy alloys produced by mechanical alloying and spark plasma sintering, Journal of Alloys and Compounds, , 698, 591-604 (2017)
  • Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel, Materials Science and Engineering A, , 684, 54-63 (2017)
  • Tensile property improvement of TWIP-cored three-layer steel sheets fabricated by hot-roll-bonding with low-carbon steel or interstitial-free steel, Scientific Reports, , 7, 40231- (2017)
  • Tensile properties of cold-rolled TWIP-cored three-layer steel sheets, Materials Science and Engineering: A, , 686, 160-167 (2017)
  • A microstructural and kinetic investigation on suppression of grains growth in nanocrystalline copper through silicon carbide nanoparticle dispersion, Materials & Design, , 119, 311-318 (2017)
  • Twist Extrusion as a Potent Tool for Obtaining Advanced Engineering Materials: A Review, ADVANCED ENGINEERING MATERIALS, , 19, - (2017)
  • Deep drawing behavior of twinning-induced plasticity-cored three-layer steel sheet, INTERNATIONAL JOURNAL OF MATERIAL FORMING, , 11, 11-18 (2017)
  • Threshold creep behaviour of an aged Mg–Zn–Ca alloy, Materials Science and Engineering: A, , 696, 536-543 (2017)
  • Deep Drawing Behavior of CoCrFeMnNi High-Entropy Alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48A, 4111-4120 (2017)
  • Influence of high-pressure torsion and hot rolling on the microstructure and mechanical properties of aluminum-fullerene composites, JOURNAL OF MATERIALS SCIENCE, , 52, 11988-12000 (2017)
  • MICROSTRUCTURE AND MECHANICAL PROPERTIES OF Al-3 VOL% CNT NANOCOMPOSITES PROCESSED BY HIGH-PRESSURE TORSION, ARCHIVES OF METALLURGY AND MATERIALS, , 62, 1109-1112 (2017)
  • Novel twin-roll-cast Ti/Al clad sheets with excellent tensile properties, Scientific Reports, , 7, - (2017)
  • Trade-off between tensile property and formability by partial recrystallization of CrMnFeCoNi high-entropy alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 703, 324-330 (2017)
  • Microstructure development of ultra fine grained Mg-22 wt%Gd alloy prepared by high pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 704, 181-191 (2017)
  • Age Hardening and Re-crystallization Softening of a CoCrFeMnNi High Entropy Alloy, Journal of the Korean Institute of Metals and Materials, , 55, 684-688 (2017)
  • Development of Methodology with Excellent Reproducibility for Evaluating Stretch-Flangeability Using a Sheared-Edge Tensile Test, EXPERIMENTAL MECHANICS, , 57, 1349-1358 (2017)
  • Deformation rate controls atomic-scale dynamic strain aging and phase transformation in high Mn TRIP steels, ACTA MATERIALIA, , 131, 187-196 (2017)
  • Residual Stress Effect on the Delayed Fracture of Twinning-Induced Plasticity Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48, 2692-2696 (2017)
  • Effect of surface etching on the tensile behavior of coarse- and ultrafine-grained pure titanium, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 707, 337-343 (2017)
  • Fabrication of Fullerene-Reinforced Aluminum Matrix Nanocomposites, Acta Metallurgica Sinica-English Letters, , 30, 973-982 (2017)
  • Novel 1.5 GPa-strength with 50%-ductility by transformation-induced plasticity of non-recrystallized austenite in duplex steels, Scientific Reports, , 7, - (2017)
  • Key factors of stretch-flangeability of sheet materials, JOURNAL OF MATERIALS SCIENCE, , 52, 7808-7823 (2017)
  • Fabrication of Al/Al2Cu in situ nanocomposite via friction stir processing, TRANSACTIONS OF NONFERROUS METALS SOCIETY OF CHINA, , 27, 779-788 (2017)
  • Heterogeneous plastic deformation for HPT IF steel disks during compression stage, Cailiao Rechuli Xuebao/Transactions of Materials and Heat Treatment, , 38, 105-110 (2017)
  • Tensile deformation behavior and deformation twinning of an equimolar CoCrFeMnNi high-entropy alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 689, 122-133 (2017)
  • Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 708, 291-300 (2017)
  • Numerical analysis on the formation of P-orientation near coarse precipitates in FCC crystals during recrystallization, ACTA MATERIALIA, , 131, 363-372 (2017)
  • On the strain rate-dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at liquid nitrogen temperature, Materials Research Letters, , 5, 472-477 (2017)
  • Fluorescence characteristics and labeling mechanism for living cells of pathogenic fusarium with silicon carbide quantum dots, Gongneng Cailiao/Journal of Functional Materials, , 48, 5185-5189 (2017)
  • Constitutive modeling of deformation behavior of high-entropy alloys with face-centered cubic crystal structure, Materials Research Letters, , 5, 350-356 (2017)
  • Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77K, MATERIALS LETTERS, , 202, 86-88 (2017)
  • Superior pre-osteoblast cell response of etched ultrafine-grained titanium with a controlled crystallographic orientation, Scientific Reports, , 7, - (2017)
  • Interpretation of quasi-static and dynamic tensile behavior by digital image correlation technique in TWinning Induced Plasticity (TWIP) and low-carbon steel sheets, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 693, 170-177 (2017)
  • On the rule-of-mixtures of the hardening parameters in TWIP-cored three-layer steel sheet, METALS AND MATERIALS INTERNATIONAL, , 23, 1-6 (2017)
  • Stretchability and drawability of twinning-Induced plasticity steel-Cored layer steel sheets, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 250, 357-362 (2017)
  • Wear Resistance of the La62Cu12Ni12Al14 Bulk Metallic Glass Under Dry Friction Conditions, TRIBOLOGY LETTERS, , , - (2017)
  • Microstructural and kinetic investigation on the suppression of grain growth in nanocrystalline copper by the dispersion of silicon carbide nanoparticles, Materials and Design, , 119, 311-318 (2017)
  • Compaction Behavior of Water-Atomized CoCrFeMnNi High-Entropy Alloy Powders, MATERIALS CHEMISTRY AND PHYSICS, , 210, 95-102 (2017)
  • Effects of homogenization temperature on cracking during cold rolling of Al0.5CoCrFeMnNi high-entropy alloy, MATERIALS CHEMISTRY AND PHYSICS, , , - (2017)
  • Inhomogeneous Deformation of Interstitial Free Steel during the High Pressure Torsion Process, Journal of the Korean Institute of Metals and Materials, , 55, 710-715 (2017)
  • Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy, Nature Communications, , , - (2017)
  • Dynamic tensile behavior of twinning-induced plasticity/low-carbon (TWIP/LC) steel clad sheets bonded by hot rolling, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 700, 387-396 (2017)
  • Interpretation of dynamic tensile behavior by austenite stability in ferrite-austenite duplex lightweight steels, Scientific Reports, , , - (2017)
  • Equivalent strain at large shear deformation: Theoretical, numerical and finite element analysis, Journal of Applied Research and Technology, , 15, 442-448 (2017)
  • THE APPLICATION OF FRICTION STIR PROCESSING TO THE FABRICATION OF MAGNESIUM-BASED FOAMS, ARCHIVES OF METALLURGY AND MATERIALS, , 62, 1957-1962 (2017)
  • 고엔트로피 합금의 제조 방법과 연구 동향: 리뷰, Journal of the Korean Institute of Metals and Materials, , 55, 671-683 (2017)
  • Review of principles and methods of severe plastic deformation for producing ultrafine-grained tubes, MATERIALS SCIENCE AND TECHNOLOGY, , 33, 905-923 (2017)
  • Effects of homogenization temperature on cracking during cold-rolling of Al0.5CoCrFeMnNi high-entropy alloy, MATERIALS CHEMISTRY AND PHYSICS, , 210, 187-191 (2017)
  • Deformation-induced phase transformation of Co20Cr26Fe20Mn20Ni14 high-entropy alloy during high-pressure torsion at 77 K, MATERIALS LETTERS, , 202, 86-88 (2017)
  • On the strain rate dependent deformation mechanism of CoCrFeMnNi high-entropy alloy at room and liquid nitrogen temperatures, Materials Research Letters, , 5, 472-477 (2017)
  • Cryogenic strength improvement by utilizing room-temperature deformation twinning in a partially recrystallized VCrMnFeCoNi high-entropy alloy, Nature Communications, , 8, - (2017)
  • Tensile properties of cold-rolled TWIP-cored three-layer steel sheets, Materials Science and Engineering:A, , 686, 160-167 (2017)
  • Quasi-static and dynamic deformation mechanisms interpreted by microstructural evolution in TWinning Induced Plasticity (TWIP) steel, Metallurgical and Materials Transactions A, , 684, 54-63 (2017)
  • Interpretation of dynamic tensile behavior by austenite stability in ferrite-austenite duplex lightweight steels, SCIENTIFIC REPORTS, , 7, - (2017)
  • Influences of high strain rate, low temperature, and deformation direction on microstructural evolution and mechanical properties of copper, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 684, 567-576 (2017)
  • Dynamic tensile behavior of twinning-induced plasticity/low-carbon (TWIP/LC) steel clad sheets bonded by hot rolling, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 700, 387-396 (2017)
  • Effects of dendrite size on dynamic tensile deformation behavior in Zr-based amorphous alloys containing ductile dendrites, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 650, 102-109 (2016)
  • Microstructure and high-temperature mechanical properties of the Mg-4Zn-0.5Ca alloy in the as-cast and aged conditions, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 649, 441-448 (2016)
  • Compressibility of hierarchic-architectured agglomerates of hydrogen-reduced copper nanopowders, JOURNAL OF MATERIALS SCIENCE, , 51, 82-95 (2016)
  • Effect of Friction Stir Processing on the Microstructure of Pure Mg Castings, International Journal of Cast Metals Research, , 28, 345-351 (2016)
  • Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation, ACTA MATERIALIA, , 105, 258-272 (2016)
  • Effects of annealing treatment prior to cold rolling on delayed fracture properties in ferrite-austenite duplex lightweight steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47, 706-717 (2016)
  • Streamline Approach to Die Design and Investigation of Materials Flow in Vortex Extrusion Process, Applied Mathematical Modelling, , 40, 3550-3560 (2016)
  • Bi-modal structure of copper via room temperature partial recrystallization after cryogenic dynamic compression, Metallurgical and Materials Transactions A, , 47, 1600-1606 (2016)
  • Modeling and characterization of texture evolution in twist extrusion, Metallurgical and Materials Transactions A, , 47, 1248-1260 (2016)
  • Mechanical properties and microstructural evaluation of AA1100 to AZ31 dissimilar friction stir welds, MATERIALS CHEMISTRY AND PHYSICS, , 170, 251-260 (2016)
  • Structural and phase transformation in a TWIP steel subjected to high pressure torsion, MATERIALS LETTERS, , 166, 321-324 (2016)
  • Corrigendum to ‘Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 654, 379-380 (2016)
  • Effects of Effective Dendrite Size on Dynamic Tensile Properties of Ti-Based Amorphous Matrix Composites, Metallurgical and Materials Transactions A, , 47, 1504-1509 (2016)
  • Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP+TRIP steel, ACTA MATERIALIA, , 108, 219-228 (2016)
  • Development of an oxide-dispersion-strengthened steel by introducing oxygen carrier compound into the melt aided by a general thermodynamic model, SCIENTIFIC REPORTS, , 6, - (2016)
  • Effects of Friction and Anvil Design on Plastic Deformation during the Compression Stage of High-Pressure Torsion, Korean Journal of Metals and Materials, , 54, 831-837 (2016)
  • Factors governing hole expansion ratio of steel sheets with smooth sheared edge, METALS AND MATERIALS INTERNATIONAL, , 22, 1009-1014 (2016)
  • Large deformation behavior of twin-induced plasticity steels under high-pressure torsion, METALS AND MATERIALS INTERNATIONAL, , 22, 1003-1008 (2016)
  • Compressive deformation behavior of CrMnFeCoNi high-entropy alloy, METALS AND MATERIALS INTERNATIONAL, , 22, 982-986 (2016)
  • Compressive behavior of NiTi-based composites reinforced with alumina nanoparticles, JOURNAL OF ALLOYS AND COMPOUNDS, , 688, 803-807 (2016)
  • Dynamic tensile deformation behavior of Zr-based amorphous alloy matrix composites reinforced with tungsten or tantalum fibers, METALS AND MATERIALS INTERNATIONAL, , 22, 707-713 (2016)
  • Ring-Constraint High-Pressure Torsion Process, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 3473-3478 (2016)
  • Novel strip-cast Mg/Al clad sheets with excellent tensile and interfacial bonding properties, SCIENTIFIC REPORTS, , 6, - (2016)
  • Multiscale architectured materials with composition and grain size gradients manufactured using high-pressure torsion, SCIENTIFIC REPORTS, , 6, - (2016)
  • Real Hydrostatic Pressure in High-Pressure Torsion Measured by Bismuth Phase Transformations and FEM Simulations, MATERIALS TRANSACTIONS, , 57, 533-538 (2016)
  • Enhanced Wear Resistivity of a Zr-based Bulk Metallic Glass Processed by High-Pressure Torsion Under Reciprocating Dry Conditions, METALS AND MATERIALS INTERNATIONAL, , 22, 383-390 (2016)
  • Correlation Between Microstructures and Tensile Properties of Strain-Based API X60 Pipeline Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 2726-2738 (2016)
  • Micromechanical finite element analysis of strain partitioning in multiphase medium manganese TWIP plus TRIP steel, ACTA MATERIALIA, , 108, 219-228 (2016)
  • Streamline approach to die design and investigation of material flow during the vortex extrusion process, APPLIED MATHEMATICAL MODELLING, , 40, 3550-3560 (2016)
  • Modeling and Characterization of Texture Evolution in Twist Extrusion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 1248-1260 (2016)
  • Bi-modal Structure of Copper via Room-Temperature Partial Recrystallization After Cryogenic Dynamic Compression, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 1600-1606 (2016)
  • "Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders (vol 625, pg 230, 2015)", MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 654, 379-380 (2016)
  • Mechanical properties and microstructural evaluation of AA1100 to AZ31 dissimilar friction stir welds, MATERIALS CHEMISTRY AND PHYSICS, , 170, 251-260 (2016)
  • Effects of Annealing Treatment Prior to Cold Rolling on Delayed Fracture Properties in Ferrite-Austenite Duplex Lightweight Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 706-717 (2016)
  • train induced hardening and softening behaviors of deformed Cu and Cu-Ge alloys, Journal of Materials Research, , 31, 599-608 (2016)
  • Characterizations of dissimilar friction welding of ST37 and CK60 steels, International Journal of Advanced Manufacturing Technology, , 85, 2773-2781 (2016)
  • Obtaining Reliable True Plastic Stress-Strain Curves in a Wide Range of Strains Using Digital Image Correlation in Tensile Testing, KOREAN JOURNAL OF METALS AND MATERIALS, , 54, 231-236 (2016)
  • Strain induced hardening and softening behaviors of deformed Cu and Cu-Ge alloys, Journal of Materials Research, , 31, 599-608 (2016)
  • High-temperature thermo-mechanical behavior of functionally graded materials produced by plasma sprayed coating:, Metals and Materials International, , 22, 817-824 (2016)
  • Ton-scale metal–carbon nanotube composite: The mechanism of strengthening while retaining tensile ductility, Extreme Mechanics Letters, , 8, 245-250 (2016)
  • Experimental and finite element analyses of plastic deformation behavior in vortex extrusion, Materials Science and Engineering A, , 674, 472-479 (2016)
  • Correlation between fracture toughness and stretch-flangeability of advanced high strength steels, Materials Letters, , 180, 322-326 (2016)
  • Outstanding mechanical properties of high-pressure torsion processed multiscale TWIP-cored three layer steel sheet, Scripta Materialia, , 123, 122-125 (2016)
  • Corrigendumto ‘Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 625, 230-244 (2016)
  • Plastic Deformation Behavior and Microstructural Evolution of Al-Core/Cu-Sheath Composites in Multi-pass Caliber Rolling, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 260-269 (2015)
  • Effects of Effective Dendrite Size on Tensile Deformation Behavior in Ti-Based Dendrite-Containing Amorphous Matrix Composites Modified from Ti-6Al-4V Alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 235-250 (2015)
  • Simple Shear Model of Twist Extrusion and Its Deviations, METALS AND MATERIALS INTERNATIONAL, , 21, 569-579 (2015)
  • Work-Hardening Induced Tensile Ductility of Bulk Metallic Glasses via High-Pressure Torsion, Scientific Reports, , 5, - (2015)
  • Unique Appearance of Lamellar Cleavage Patterns on Fracture Surfaces of Ti-Based Amorphous Matrix Composite, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 2506-2515 (2015)
  • Using dilatometry to study martensitic stabilization and recrystallization kinetics in a severely deformed NiTi alloy, JOURNAL OF MATERIALS SCIENCE, , 50, 4003-4011 (2015)
  • Annealing behavior and shape memory effect in NiTi alloy processed by equal-channel angular pressing at room temperature, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 629, 16-22 (2015)
  • Al/C60 Nanocomposites Fabricated by High-Pressure Torsion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 1838-1842 (2015)
  • Microstructure, plastic deformation and strengthening mechanisms of an Al-Mg-Si alloy with a bimodal grain structure, JOURNAL OF ALLOYS AND COMPOUNDS, , 632, 540-548 (2015)
  • Three-dimensional real structure-based finite element analysis of mechanical behavior for porous titanium manufactured by a space holder method, COMPUTATIONAL MATERIALS SCIENCE, , 100, 2-7 (2015)
  • Preface to the ISNNM13 special issue, COMPUTATIONAL MATERIALS SCIENCE, , 100, 1-1 (2015)
  • Microstructure and Mechanical Properties of Ultra-fine-Grained Al-Mg-Si Tubes Produced by Parallel Tubular Channel Angular Pressing Process, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 1805-1813 (2015)
  • Interpretation of Fracture Toughness and R-Curve Behavior by Direct Observation of Microfracture Process in Ti-Based Dendrite-Containing Amorphous Alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 1588-1596 (2015)
  • Shape memory effect in nanocrystalline NiTi alloy processed by high-pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 626, 203-206 (2015)
  • Consolidation of Cu-based amorphous alloy powders by high-pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 50, 3164-3174 (2015)
  • Microstructure evolution and mechanical properties of pure aluminum deformed by equal channel angular pressing and direct extrusion in one step through an integrated die, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 625, 252-263 (2015)
  • Plastic deformation and microstructural evolution during the shock consolidation of ultrafine copper powders, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 625, 230-244 (2015)
  • Evolution of microstructure and hardness in AZ31 alloy processed by high pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 625, 98-106 (2015)
  • Correlative High-Resolution Mapping of Strain and Charge Density in a Strained Piezoelectric Multilayer, ADVANCED MATERIALS INTERFACES, , 2, - (2015)
  • Thickness Inhomogeneity in Hardness and Microstructure of Copper After the Compressive Stage in High-Pressure Torsion, METALS AND MATERIALS INTERNATIONAL, , 21, 7-13 (2015)
  • Strain Softening Induced by High Pressure Torsion in Copper Alloys, MATERIALS TRANSACTIONS, , 56, 48-53 (2015)
  • Contributions of different strengthening mechanisms to the shear strength of an extruded Mg-4Zn-0.5Ca alloy, PHILOSOPHICAL MAGAZINE, , 95, 3452-3466 (2015)
  • Microstructural evolution and strain-hardening behavior of multi-pass caliber-rolled Ti-13Nb-13Zr, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 648, 359-366 (2015)
  • Effect of High-Pressure Torsion on the Microstructure and Wear Behavior of NiTi Alloy, METALS AND MATERIALS INTERNATIONAL, , 21, 891-896 (2015)
  • CORRELATION BETWEEN SUPERHEATED LIQUID FRAGILITY AND ONSET TEMPERATURE OF CRYSTALLIZATION FOR Al-BASED AMORPHOUS ALLOYS, ARCHIVES OF METALLURGY AND MATERIALS, , 60, 1543-1546 (2015)
  • Microstructure, grain growth, and hardness during annealing of nanocrystalline Cu powders synthesized via high energy mechanical milling, MATERIALS & DESIGN, , 83, 644-650 (2015)
  • Dynamic tension-compression asymmetry of martensitic transformation in austenitic Fe-(0.4,1.0)C-18Mn steels for cryogenic applications, ACTA MATERIALIA, , 96, 37-46 (2015)
  • Effect of the interfacial condition on the microtexture near the interface of Al/Cu composites during multi-pass caliber rolling, MATERIALS & DESIGN, , 82, 28-36 (2015)
  • Effect of starting materials on the wear performance of NiTi-based composites, WEAR, , 334, 35-43 (2015)
  • Off-Axis Twist Extrusion for Uniform Processing of Round Bars, METALS AND MATERIALS INTERNATIONAL, , 21, 734-740 (2015)
  • Effect of high-pressure torsion on the microstructure and strengthening mechanisms of hot-consolidated Cu-CNT nanocomposite, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 638, 289-295 (2015)
  • Fast and fully-scalable synthesis of reduced graphene oxide, SCIENTIFIC REPORTS, , 5, - (2015)
  • Silicidation of Mo-alloyed ytterbium: Mo alloying effects on microstructure evolution and contact properties, ACTA MATERIALIA, , 92, 1-7 (2015)
  • Surface Modification of Multipass Caliber-Rolled Ti Alloy with Dexamethasone-Loaded Graphene for Dental Applications, ACS APPLIED MATERIALS & INTERFACES, , 7, 9598-9607 (2015)
  • Dynamic strain aging of twinning-induced plasticity (TWIP) steel in tensile testing and deep drawing, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 633, 136-143 (2015)
  • Regulation of Physicochemical Characteristics on Surface of SiC Quantum Dots and Its Spectral Properties, JOURNAL OF THE CHINESE CERAMIC SOCIETY, , 43, 431-436 (2015)
  • Torsional and compressive behaviors of a hybrid material: spiral fibre reinforced metal matrix composite, MATERIALS & DESIGN, , 85, 404-411 (2015)
  • Finite element analysis of the plastic deformation in tandem process of simple shear extrusion and twist extrusion, MATERIALS & DESIGN, , 83, 858-865 (2015)
  • Effect of friction stir processing on the microstructure of pure magnesium castings, International Journal of Cast Metals Research, , 28, 345-351 (2015)
  • Ga-doped indium oxide nanowire phase change random access memory cells, NANOTECHNOLOGY, , 25, - (2014)
  • Microstructure and mechanical properties of a Mg-Zn-Y alloy produced by a powder metallurgy route, JOURNAL OF ALLOYS AND COMPOUNDS, , 586, S95-S100 (2014)
  • Hollow cone high-pressure torsion: Microstructure and tensile strength by unique severe plastic deformation, SCRIPTA MATERIALIA, , 71, 41-44 (2014)
  • Wear properties of high pressure torsion processed ultrafine grained Al-7%Si alloy, MATERIALS & DESIGN, , 53, 373-382 (2014)
  • Crystal plasticity modeling of the effect of precipitate states on the work hardening and plastic anisotropy in an Al-Mg-Si alloy, Computational Materials Science, , 83, 78-85 (2014)
  • Serration phenomena occurring during tensile tests of three high-manganese TWinning Induced Plasticity (TWIP) steels, Metallurgical and Materials Transactions A, , 45, 633-646 (2014)
  • Microstructure and compressibility of SiC nanoparticle reinforced Cu nanocomposite powders processed by high energy mechanical milling, Ceramics International, , 40, 951-960 (2014)
  • Effect of Fiber Diameter on Quasi-static and Dynamic Compressive Properties of Zr-Based Amorphous Matrix Composites Reinforced with Stainless Steel Continuous Fibers, Metallurgical and Materials Transactions A, , 45, 1284-1293 (2014)
  • Anisotropy of Dynamic Compressive Properties of Non-Heat-Treating Cold-Heading-Quality Steel Bars, Metallurgical and Materials Transactions A, , 45, 1294-1305 (2014)
  • Space-Holder Effect on Designing Pore Structure and Determining Mechanical Properties in Porous Titanium, Materials & Design, , 57, 712-718 (2014)
  • Investigation of thermal resistance and power consumption in Ga-doped Indium Oxide (In2O3) nanowire phase change random access memory, Applied Physics Letters, , 104, 103510-103514 (2014)
  • Microstructure and Mechanical Properties of Copper Processed by Twist Extrusion with a Reduced Twist-Line Slope, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 2232-2241 (2014)
  • Residual Stress Analysis in Deep Drawn Twinning Induced Plasticity (TWIP) Steels Using Neutron Diffraction Method, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 1953-1961 (2014)
  • Space-holder effect on designing pore structure and determining mechanical properties in porous titanium, MATERIALS & DESIGN, , 57, 712-718 (2014)
  • Plastic Deformation and Computer Simulations of Equal Channel Angular Pressing, KOREAN JOURNAL OF METALS AND MATERIALS, , 52, 87-99 (2014)
  • Effect of Fiber Diameter on Quasi-static and Dynamic Compressive Properties of Zr-Based Amorphous Matrix Composites Reinforced with Stainless Steel Continuous Fibers, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 1284-1293 (2014)
  • Finite element analysis of the effect of friction in high pressure torsion, METALS AND MATERIALS INTERNATIONAL, , 20, 445-450 (2014)
  • Finite element analysis for application to the forming process of Ti-based bulk metallic glasses, Materials and Manufacturing Processes, , 29, 801-807 (2014)
  • Microstructural Characterization of HIP Consolidated NiTi-nano Al2O3 Composites, JOURNAL OF ALLOYS AND COMPOUNDS, , 606, 21-26 (2014)
  • Circumferential shear strain in torsion-based severe plastic deformation, SCRIPTA MATERIALIA, , 82, 41-44 (2014)
  • Finite element and experimental analyses of closure and contact bonding of pores during hot rolling of steel, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials, , 45, 4002-4011 (2014)
  • Quasi-static and Dynamic Compressive Properties of Ti-Based Amorphous Alloys Modified from Conventional Ti-6Al-4V Titanium Alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 607, 197-205 (2014)
  • Consolidation of carbon nanotube reinforced aluminum matrix composites by high-pressure torsion, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, , 45, 4129-4137 (2014)
  • Finite element analysis for the geometry effect on strain inhomogeneity during high-pressure torsion, Journal of Materials Science, , 49, 6620-6628 (2014)
  • Dislocation density-based finite element analysis of large strain deformation behavior of copper under high-pressure torsion, Acta Materialia, , 76, 281-293 (2014)
  • Fabrication of W-Cu Alloy via Combustion Synthesis Infiltration Under an Ultra-Gravity Field, METALS AND MATERIALS INTERNATIONAL, , 20, 1145-1150 (2014)
  • Local and Global Stress-Strain Behaviors of Transformation-Induced Plasticity Steel Using the Combined Nanoindentation and Finite Element Analysis Method, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 6008-6015 (2014)
  • Effect of Homogenization Treatment on the Microstructure and Mechanical Property Evolutions of As-Cast Al-Cu Alloy during High-Pressure Torsion, MATERIALS TRANSACTIONS, , 55, 1405-1413 (2014)
  • Bandgap Tuning with Thermal Residual Stresses Induced in a Quantum Dot, SMALL, , 10, 3678-3684 (2014)
  • Interfacial microstructures and properties of aluminum alloys/galvanized low-carbon steel under high-pressure torsion, MATERIALS & DESIGN, , 64, 287-293 (2014)
  • Three-Dimensional Characterization of SiC Particle-Reinforced Al Composites Using Serial Sectioning Tomography and Thermo-mechanical Finite Element Simulation, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 5679-5690 (2014)
  • An Upper Bound Solution for Twist Extrusion Process, METALS AND MATERIALS INTERNATIONAL, , 20, 825-834 (2014)
  • Effect of Post-annealing on Grain Boundary of Nano-crystalline Cu Processed by Powder High-Pressure Torsion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 4748-4752 (2014)
  • Wear properties of brass samples subjected to constrained groove pressing process, MATERIALS & DESIGN, , 63, 531-537 (2014)
  • Finite element analysis for the geometry effect on strain inhomogeneity during high-pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 49, 6620-6628 (2014)
  • Finite Element and Experimental Analysis of Closure and Contact Bonding of Pores During Hot Rolling of Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 4002-4011 (2014)
  • Role of an encapsulating layer for reducing resistance drift in phase change random access memory, AIP Advances, , 4, 127155- (2014)
  • Consolidation of Carbon Nanotube Reinforced Aluminum Matrix Composites by High-Pressure Torsion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 4129-4137 (2014)
  • Finite element simulation of powder compaction via shock consolidation using gas-gun system, Procedia Engineering, , 81, 1180-1185 (2014)
  • Serration Phenomena Occurring During Tensile Tests of Three High-Manganese Twinning-Induced Plasticity (TWIP) Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 45A, 633-646 (2014)
  • Microstructure and compressibility of SiC nanoparticles reinforced Cu nanocomposite powders processed by high energy mechanical milling, CERAMICS INTERNATIONAL, , 40, 951-960 (2014)
  • Recycling of AlSi8Cu3 alloy chips via high pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 560, 121-128 (2013)
  • Shear banding behavior and fracture mechanisms of Zr55Al10Ni5Cu30 bulk metallic glass in uniaxial compression analyzed using a digital image correlation method, INTERMETALLICS, , 32, 21-29 (2013)
  • Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 568, 33-39 (2013)
  • Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , , - (2013)
  • Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns, SCRIPTA MATERIALIA, , 68, 245-248 (2013)
  • Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy, MATERIALS CHARACTERIZATION, , 75, 108-114 (2013)
  • Microstructure and thermal stability of copper-carbon nanotube composites consolidated by high-pressure torsion, Materials Science Forum, , 729, 228-233 (2013)
  • Dendrite size and tensile ductility in Ti-based amorphous alloys containing ductile dendrites, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 587, 143-149 (2013)
  • Effects of intergranular carbide precipitation on delayed fracture behavior in three TWinning Induced Plasticity (TWIP) steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 587, 85-99 (2013)
  • Constitutive Modeling of Hot Deformation Behavior of the AA6063 Alloy with Different Precipitates, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 5853-5860 (2013)
  • Finite Element Analysis of Deformation Homogeneity During Continuous and Batch Type Equal Channel Angular Pressing, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, , 22, 3222-3227 (2013)
  • Comparative Analysis of Two Twist-Based SPD Processes: Elliptical Cross-Section Spiral Equal-Channel Extrusion vs. Twist Extrusion, MATERIALS TRANSACTIONS, , 54, 1587-1591 (2013)
  • Effect of nanoparticle content on the microstructural and mechanical properties of nano-SiC dispersed bulk ultrafine-grained Cu matrix composites, MATERIALS & DESIGN, , 52, 881-887 (2013)
  • MECHANICAL-ACTIVATED PHASE FORMATION OF NiTi IN THE PRESENCE OF NANOPARTICLES, NANO, , 8, 1350048- (2013)
  • Analysis of stress states in compression stage of high pressure torsion using slab analysis method and finite element method, METALS AND MATERIALS INTERNATIONAL, , 19, 1021-1027 (2013)
  • Grain refinement and tensile strength of carbon nanotube-reinforced Cu matrix nanocomposites processed by high-pressure torsion, METALS AND MATERIALS INTERNATIONAL, , 19, 927-932 (2013)
  • Kinetic study of non-isothermal crystallization in Al80Fe10Ti5Ni5 metallic glass, METALS AND MATERIALS INTERNATIONAL, , 19, 901-906 (2013)
  • Design of Hierarchical Cellular Metals Using Accumulative Bundle Extrusion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 4031-4036 (2013)
  • Effect of nano Al2O3 addition on mechanical properties and wear behavior of NiTi intermetallic, MATERIALS & DESIGN, , 51, 375-382 (2013)
  • Quasi-static and dynamic compressive deformation behaviors in Zr-based amorphous alloys containing ductile dendrites, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 579, 77-85 (2013)
  • High temperature thermal stability of pure copper and copper-carbon nanotube composites consolidated by High Pressure Torsion, COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING, , 51, 71-79 (2013)
  • Analysis of plastic deformation behavior during back pressure equal channel angular pressing by the finite element method, COMPUTATIONAL MATERIALS SCIENCE, , 77, 202-207 (2013)
  • Effects of microstructure and pipe forming strain on yield strength before and after spiral pipe forming of API X70 and X80 linepipe steel sheets, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 573, 18-26 (2013)
  • Cross Flow During Twist Extrusion: Theory, Experiment, and Application, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 3211-3220 (2013)
  • Inhomogeneity Through Warm Equal Channel Angular Pressing, JOURNAL OF MATERIALS ENGINEERING AND PERFORMANCE, , 22, 1666-1671 (2013)
  • High-pressure torsion for enhanced atomic diffusion and promoting solid-state reactions in the aluminum-copper system, ACTA MATERIALIA, , 61, 3482-3489 (2013)
  • Architecturing of Metal-Based Composites with Concurrent Nanostructuring: A New Paradigm of Materials Design, ADVANCED ENGINEERING MATERIALS, , 15, 336-340 (2013)
  • Fabrication, characterization and mechanical properties of hybrid composites of copper using the nanoparticulates of SiC and carbon nanotubes, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 572, 83-90 (2013)
  • Mechanisms of toughness improvement in Charpy impact and fracture toughness tests of non-heat-treating cold-drawn steel bar, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 571, 38-48 (2013)
  • An Investigation on the Fatigue Fracture of P/M Al-SiC Nanocomposites, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 2662-2671 (2013)
  • Microstructure Evolution and Mechanical Properties of Al-1080 Processed by a Combination of Equal Channel Angular Pressing and High Pressure Torsion, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 2581-2590 (2013)
  • Estimating interface bonding strength in clad metals using digital image correlation, SCRIPTA MATERIALIA, , 68, 893-896 (2013)
  • Mechanical properties and microstructure evolution in ultrafine-grained AZ31 alloy processed by severe plastic deformation, JOURNAL OF MATERIALS SCIENCE, , 48, 4705-4712 (2013)
  • Hardness and microstructure of interstitial free steels in the early stage of high-pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 48, 4698-4704 (2013)
  • Experimental and finite element analyses of plastic deformation in the compressive stage of copper in high-pressure torsion, Rare Metal Materials and Engineering, , 42, 301-304 (2013)
  • High Tensile Ductility of Ti-Based Amorphous Matrix Composites Modified from Conventional Ti-6Al-4V Titanium Alloy, Acta Materialia, , 61, 3012-3026 (2013)
  • Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity assisted steel, Scripta materialia, , 68, 933-936 (2013)
  • Simulation and experimental analyses on the dynamic strain aging in a supersaturated age hardenable aluminium alloy, Materials Science and Engineering A, , 585, 165-173 (2013)
  • Microstructural development and mechanical properties of nanostructured copper reinforced with SiC nanoparticles, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 568, 33-39 (2013)
  • Microstructure, strengthening mechanisms and hot deformation behavior of an oxide-dispersion strengthened UFG Al6063 alloy, MATERIALS CHARACTERIZATION, , 75, 108-114 (2013)
  • Effects of Inclusions on Delayed Fracture Properties of Three TWinning Induced Plasticity (TWIP) Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44A, 776-786 (2013)
  • Deformation Behavior in Tubular Channel Angular Pressing (TCAP) Using Triangular and Semicircular Channels, MATERIALS TRANSACTIONS, , 53, 8-12 (2012)
  • Numerical and experimental investigation of the deformation behavior during the accumulative back extrusion of an AZ91 magnesium alloy, MATERIALS & DESIGN, , 35, 251-258 (2012)
  • A combination of severe plastic deformation and ageing phenomena in Al-Mg-Si Alloys, MATERIALS & DESIGN, , 36, 735-740 (2012)
  • Microstructural Evolution of UFG Magnesium Alloy Produced by Accumulative Back Extrusion (ABE), MATERIALS AND MANUFACTURING PROCESSES, , 27, 267-272 (2012)
  • Dynamic restoration and microstructural evolution during hot deformation of a P/M Al6063 alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 542, 56-63 (2012)
  • Effects of Aluminum Addition on Tensile and Cup Forming Properties of Three Twinning Induced Plasticity Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1870-1883 (2012)
  • Dynamic Compressive Properties of Zr-based Amorphous Matrix Composites Reinforced with Tungsten Continuous Fibers or Porous Foams, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1911-1920 (2012)
  • High-temperature deformation and structural restoration of a nanostructured Al alloy, SCRIPTA MATERIALIA, , 66, 911-914 (2012)
  • Finite element analysis of plastic deformation in twist extrusion, COMPUTATIONAL MATERIALS SCIENCE, , 60, 194-200 (2012)
  • Deformation behavior in the tubular channel angular pressing (TCAP) as a noble SPD method for cylindrical tubes, APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING, , 107, 819-827 (2012)
  • Constitutive model for high temperature deformation behavior of Ti-Zr-Ni-Be bulk metallic glass in supercooled liquid region, COMPUTATIONAL MATERIALS SCIENCE, , 61, 213-223 (2012)
  • The dead metal zone in high-pressure torsion, SCRIPTA MATERIALIA, , 67, 384-387 (2012)
  • Effects of microstructure and yield ratio on strain hardening and Bauschinger effect in two API X80 linepipe steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 551, 192-199 (2012)
  • Microstructures and mechanical properties of Mg-Zn-Y alloy consolidated from gas-atomized powders using high-pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 47, 7117-7123 (2012)
  • X-ray diffraction study on the microstructure of a Mg-Zn-Y alloy consolidated by high-pressure torsion, JOURNAL OF ALLOYS AND COMPOUNDS, , 539, 32-35 (2012)
  • Analysis and estimation of yield strength of API X80 linepipe steel pipe by low-cycle fatigue tests, METALS AND MATERIALS INTERNATIONAL, , 18, 597-606 (2012)
  • THE ROLE OF FRICTION IN TUBULAR CHANNEL ANGULAR PRESSING, REVIEWS ON ADVANCED MATERIALS SCIENCE, , 31, 12-18 (2012)
  • FINITE ELEMENT ANALYSIS FOR COMPRESSION BEHAVIOR OF HIGH PRESSURE TORSION PROCESSING, REVIEWS ON ADVANCED MATERIALS SCIENCE, , 31, 25-30 (2012)
  • Mechanical properties and thermal stability of bulk Cu cold consolidated from atomized powders by high-pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 47, 7770-7776 (2012)
  • Nanoindentation analysis for local properties of ultrafine grained copper processed by high pressure torsion, JOURNAL OF MATERIALS SCIENCE, , 47, 7828-7834 (2012)
  • Deformation behavior of consecutive workpieces in equal channel angular pressing of solid dies, JOURNAL OF MATERIALS SCIENCE, , 47, 7877-7882 (2012)
  • Consolidation of Amorphous Al80Fe10Ti5Ni5 Powders by Hot Pressing, JOURNAL OF NANOMATERIALS, , , - (2012)
  • Correlation of Microstructure with Mechanical Properties of Zr-Based Amorphous Matrix Composite Reinforced with Tungsten Continuous Fibers and Ductile Dendrites, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 4088-4096 (2012)
  • A semi-phenomenological constitutive model for hcp materials as exemplified by alpha titanium, SCRIPTA MATERIALIA, , 67, 121-124 (2012)
  • Metastable phases of Al80Fe10Ti5Ni5 alloy by non-equilibrium processes, MATERIALS TRANSACTIONS, , 53, 1739-1743 (2012)
  • Corrigendum to: “A semi-phenomenological constitutive model for hcp materials as exemplified by alpha titanium”, Scripta materialia, , 67, 796- (2012)
  • Microstructural features, texture and strengthening mechanisms of nanostructured AA6063 alloy processed by powder metallurgy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 3981-3989 (2011)
  • Hot deformation of ultrafine-grained Al6063/Al2O3 nanocomposites, JOURNAL OF MATERIALS SCIENCE, , 46, 4994-5001 (2011)
  • Microstructure inhomogeneity in ultra-fine grained bulk AZ91 produced by accumulative back extrusion (ABE), MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 4312-4317 (2011)
  • Microstructure and hardness of copper-carbon nanotube composites consolidated by High Pressure Torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 4690-4695 (2011)
  • Mechanical properties of copper after compression stage of high-pressure torsion, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 4840-4844 (2011)
  • Microstructural Aspects during the Preparation of Y(3)Al(5)O(12) by Combustion Synthesis and Temperature Field Simulation, MATERIALS TRANSACTIONS, , 52, 685-690 (2011)
  • FINITE ELEMENT AND EXPERIMENTAL ANALYSES OF REPETITIVE BENDING AND STRAIGHTENING OF COMMERCIALLY PURE COPPER, REVIEWS ON ADVANCED MATERIALS SCIENCE, , 28, 79-84 (2011)
  • FABRICATION OF AZ31/Al(2)O(3) NANOCOMPOSITES BY FRICTION STIR PROCESSING, REVIEWS ON ADVANCED MATERIALS SCIENCE, , 28, 85-89 (2011)
  • A plastic-yield compaction model for nanostructured Al6063 alloy and Al6063/Al(2)O(3) nanocomposite powder, POWDER TECHNOLOGY, , 211, 215-220 (2011)
  • Forming Nanocrystalline Structures in Metal Particle Impact, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 3006-3012 (2011)
  • Microstructure and mechanical properties of oxide-dispersion strengthened Al6063 alloy with ultra-fine grain structure, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 816-824 (2011)
  • Effects of Al addition on deformation and fracture mechanisms in two high manganese TWIP steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 528, 2922-2928 (2011)
  • Tubular channel angular pressing (TCAP) as a novel severe plastic deformation method for cylindrical tubes, Materials Letters, , 65, 3009-3012 (2011)
  • Amorphous phase formation in Al80Fe10M10 (M = Ni, Ti, and V) ternary systems by mechanical alloying, JOURNAL OF MATERIALS SCIENCE, , 46, 7633-7638 (2011)
  • Calculation of Adiabatic Temperature and Experimental Investigation of Al4SiC4 Powders Fabricated by Combustion Synthesis with Chemical Oven, Journal of the Chinese Ceramic Society, , 39, 1323-1328 (2011)
  • 3D FEM simulations for the homogeneity of plastic deformation in Al-Cu alloys during ECAP, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 527, 1404-1410 (2010)
  • Grain refinement under high strain rate impact: A numerical approach, COMPUTATIONAL MATERIALS SCIENCE, , 48, 124-132 (2010)
  • 3D FEM simulations for the homogeneity of plastic deformation in Al-Cu alloys during ECAP, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 527, 1404-1410 (2010)
  • Deformation Characteristics Evaluation of Modified Equal Channel Angular Pressing Processes, MATERIALS TRANSACTIONS, , 51, 46-50 (2010)
  • Wear properties of ECAP-processed ultrafine grained Al-Cu alloys, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 527, 3726-3732 (2010)
  • Strain partitioning and mechanical stability of retained austenite, SCRIPTA MATERIALIA, , 63, 297-299 (2010)
  • In situ synthesis of nanocrystalline Al6063 matrix nanocomposite powder via reactive mechanical alloying, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 527, 4897-4905 (2010)
  • Plastic Flow and Strain Homogeneity of an Equal Channel Angular Pressing Process Enhanced through Forward Extrusion, MATERIALS TRANSACTIONS, , 51, 977-981 (2010)
  • Dynamic ageing and the mechanical response of Al-Mg-Si alloy through equal channel angular pressing, MATERIALS & DESIGN, , 31, 4076-4082 (2010)
  • Analyses of route Bc equal channel angular pressing and post-equal channel angular pressing behavior by the finite element method, JOURNAL OF MATERIALS SCIENCE, , 45, 4682-4688 (2010)
  • Upper bound analysis of deformation and dynamic ageing behavior in elevated temperature equal channel angular pressing of Al-Mg-Si alloys, METALS AND MATERIALS INTERNATIONAL, , 16, 363-369 (2010)
  • Predicting the Adiabatic Temperature of Transparent Y3Al5O12 Prepared via Combustion Synthesis under Ultra-High Gravity, MATERIALS TRANSACTIONS, , 51, 2230-2235 (2010)
  • Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders, JOURNAL OF MATERIALS SCIENCE, , 45, 4652-4658 (2010)
  • Tensile Properties and Fracture Characteristics of ECAP Processed Al and Al-Cu Alloys, METALS AND MATERIALS INTERNATIONAL, , 16, 709-716 (2010)
  • Comparison of Deformation and Microstructural Evolution between Equal Channel Angular Pressing and Forward Extrusion using the Dislocation Cell Mechanism-Based Finite Element Method, JOURNAL OF MATERIALS SCIENCE, , 45, 4705-4710 (2010)
  • Finite element analysis for high temperature deformation of bulk metallic glasses in supercooled liquid region based on free volume constitutive model, ACTA MATERIALIA, , 58, 4267-4280 (2010)
  • Microstructural evolution of equal-channel angular pressed interstitial-free steel, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 100, 834-837 (2009)
  • MULTI-SCALE FINITE ELEMENT SIMULATION OF SEVERE PLASTIC DEFORMATION, INTERNATIONAL JOURNAL OF MODERN PHYSICS B, , 23, 1621-1626 (2009)
  • Finite Element Analysis of the Bending Behavior of a Workpiece in Equal Channel Angular Pressing, METALS AND MATERIALS INTERNATIONAL, , 15, 215-219 (2009)
  • Analysis of thermal behavior during equal channel multi-angular pressing by the 3-dimensional finite volume method, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 503, 130-136 (2009)
  • Coupled Analysis of Heat Transfer and Deformation in Equal Channel Angular Pressing of Al and Steel, MATERIALS TRANSACTIONS, , 50, 40-43 (2009)
  • An experimental verification of the finite element modelling of equal channel angular pressing, COMPUTATIONAL MATERIALS SCIENCE, , 46, 347-351 (2009)
  • A New Technique for Severe Plastic Deformation: The Cone-Cone Method, ADVANCED ENGINEERING MATERIALS, , 11, 982-985 (2009)
  • Plastic deformation analysis of accumulative back extrusion, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 100, 1715-1719 (2009)
  • The Effects of Alloying and Pressing Routes in Equal Channel Angular Pressing of Cu-Fe-Cr and Cu-Fe-Cr-Ag Composites, METALS AND MATERIALS INTERNATIONAL, , 15, 733-739 (2009)
  • Analysis of Three Dimensional Equal Chanel Angular Pressing by Using the Finite Element Method in Conjunction with the Dislocation Cell Based Constitutive Model, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 47, 699-706 (2009)
  • Pressure-Dependent Yield Model for Metallic Powder Mixtures and Their Densification Behavior During Die Compaction as Analyzed by the Finite Element Method, JOURNAL OF THE KOREAN INSTITUTE OF METALS AND MATERIALS, , 47, 567-572 (2009)
  • Analysis of T-Shaped Equal Channel Angular Pressing using the Finite Element Method, METALS AND MATERIALS INTERNATIONAL, , 14, 565-568 (2008)
  • MECHANICAL PROPERTIES OF COMMERCIALLY PURE ALUMINIUM SUBJECTED TO REPETITIVE BENDING AND STRAIGHTENING PROCESS, TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, , 61, 1-3 (2008)
  • FINITE ELEMENT ANALYSIS OF PLASTIC DEFORMATION BEHAVIOR DURING HIGH PRESSURE TORSION PROCESSING, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 201, 32-36 (2008)
  • MICROSTRUCTURE, TEXTURE AND MECHANICAL PROPERTIES OF THE MAGNESIUM ALLOY AZ31 PROCESSED BY ECAP, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 99, 50-55 (2008)
  • STRENGTH AND STRAIN HARDENING OF NANOCRYSTALLINE MATERIALS, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 483, 127-130 (2008)
  • COMPARISON IN DEFORMATION AND FRACTURE BEHAVIOR OF MAGNESIUM DURING EQUAL CHANNEL ANGULAR PRESSING BY EXPERIMENTAL AND NUMERICAL METHODS, MATERIALS TRANSACTIONS, , 49, 963-966 (2008)
  • YIELD AND DENSIFICATION BEHAVIOR OF RAPIDLY SOLIDIFIED MAGNESIUM POWDERS, MATERIALS TRANSACTIONS, , 49, 967-971 (2008)
  • PROCESSING AND MECHANICAL PROPERTIES OF FINE GRAINED MAGNESIUM BY EQUAL CHANNEL ANGULAR PRESSING, MATERIALS TRANSACTIONS, , 49, 1006-1010 (2008)
  • MOLECULAR DYNAMICS INVESTIGATION ON MICROSTRUCTURE AND VOID IN AMORPHOUS SIO2, MATERIALS TRANSACTIONS, , 49, 1212-1218 (2008)
  • FINITE ELEMENT ANALYSIS OF ROTARY-DIE EQUAL CHANNEL ANGULAR PRESSING, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 490, 289-292 (2008)
  • FINITE ELEMENT ANALYSIS OF THE EFFECT OF THE INNER COMER ANGLE IN EQUAL CHANNEL ANGULAR PRESSING, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 490, 438-444 (2008)
  • SEVERE PLASTIC DEFORMATION AND STRAIN LOCALIZATION IN GROOVE PRESSING, COMPUTATIONAL MATERIALS SCIENCE, , 43, 641-645 (2008)
  • PLASTIC DEFORMATION CHARACTERISTICS OF CROSS-EQUAL CHANNEL ANGULAR PRESSING, COMPUTATIONAL MATERIALS SCIENCE, , 43, 1069-1073 (2008)
  • Effect of strain rate on compressive behavior of Ti45Zr16Ni9Cu10Be20 bulk metallic glass, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 290-294 (2007)
  • Mechanical properties of equal channel angular pressed powder extrudates of a rapidly solidified hypereutectic Al-20 wt% Si alloy, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 966-970 (2007)
  • Tensile properties of electrodeposited nanocrystalline nickel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 836-840 (2007)
  • Mechanical behavior and microstructure of Cu54Zr22Ti18Ni6 bulk metallic glass at elevated temperatures, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 122-125 (2007)
  • Deformation behavior of strip-cast bulk amorphous matrix composites containing various crystalline particles, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 449, 176-180 (2007)
  • Microstructure and corrosion properties of ultrafine- grained interstitial free steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 462, 243-247 (2007)
  • Consolidation of 1 vol. % carbon nanotube reinforced metal matrix nanocomposites via equal channel angular pressing, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 187, 318-320 (2007)
  • Die design for homogeneous plastic deformation during equal channel angular pressing, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 187, 46-50 (2007)
  • Modelling microstructure evolution toward ultrafine crystallinity produced by severe plastic deformation, JOURNAL OF MATERIALS SCIENCE, , 42, 1512-1516 (2007)
  • Kinetic dislocation model of microstructure evolution during severe plastic deformation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 460, 619-623 (2007)
  • A comment on the role of Frank-Read sources in plasticity of nanomaterials, ACTA MATERIALIA, , 55, 6401-6407 (2007)
  • Densitication modelling for nanocrystalline metallic powders, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 140, 401-406 (2003)
  • Finite element analysis of the plastic deformation in tandem process of simple shear extrusion and twist extrusion, Materials Design, , 84, 858-865 (0020)
  • Structural characterization of ultrafine-grained interstitial-free steel prepared by severe plastic deformation, ACTA MATERIALIA, , 105, 258-272 (0020)
  • Toward architecturing of metal composites by twist extrusion, MATERIALS RESEARCH LETTERS, , 3, 161-168 (0020)
  • Fluorescence characteristics and labeling mechanism for living cells of pathogenic fusarium with silicon carbide quantum dots, Gongneng Cailiao/Journal of Functional Materials, , 48, 5185-5189 (0020)

Domestic Journal Papers

  • 순 타이타늄 인장 물성에 미치는 표면 거칠기의 영향에 대한 유한요소해석, 소성가공, , 26, 108-114 (2017)
  • 등통로각압축 공정의 소성변형과 전산모사, 대한금속·재료학회지, , 52, 87-99 (2014)
  • 나노 니켈 분말의 가스건 고속압축을 통한 나노결정립 니켈 벌크재의 제조 및 물성, 한국분말야금학회지, , 21, - (2014)
  • 고속 충돌 시 발생하는 평면 충격파를 이용한 산화 나노 분말의 치밀화 및 기계적 특성 평가, 한국분말야금학회지, , 21, - (2014)
  • X-선 회절 패턴 측정과 투과 전자 현미경을 이용한 구리 나노분말의 수소 환원 처리 시 발생하는 미세조직 변화 및 치밀화 시편의 물성 분석, 한국분말야금학회지, , 21, - (2014)
  • 나노 구리-니켈 혼합분말의 충격압축법을 통한 복합벌크재의 제조 및 특성평가, 한국분말야금학회지, , 21, - (2014)
  • 2층 클래드 강재의 유한요소해석을 이용한 이방성지수 계산, 소성가공, , 23, - (2014)
  • Computer Simulation and Verification of Adiabatic Temperature and Apparent Activity Energy of the NiO/Al Aluminothermic System, Journal of Korean Powder Metallurgy Institute, , 20, 332-337 (2013)
  • Space holder 방법으로 제조된 다공질 타이타늄의 기계적 성질에대한 Computed-Tomography를 이용한 유한요소해석, Journal of Korean powder metallurgy, , 20, 350-354 (2013)
  • 나노인덴테이션과 유한요소법을 결합한 철 분말의 기계적 물성 취득, Journal of Korean powder metallurgy institute, , 20, 280-284 (2013)
  • 강소성 공정을 이용한 분말 치밀화 연구 현황, Journal of Korean powder metallurgy institute, , 20, - (2013)
  • 리뷰: 강소성 공정을 이용한 분말 치밀화 연구 현황, 한국분말야금학회지, , 20, - (2013)
  • Space holder 방법으로 제조된 다공질 타이타늄의 기계적 성질에 대한 Computed-Tomography를 이용한 유한요소해석, 한국분말야금학회지, , 20, 350-354 (2013)
  • 나노인덴테이션과 유한요소법을 결합한 철 분말의 기계적 물성 취득, 한국분말야금학회지, , 20, - (2013)
  • Trend in Research of Powder Consolidation Using Severe Plastic Deformation, 한국분말야금학회지, , 2, - (2013)
  • 고압비틀림 공정으로 제조된 구리-다이아몬드 초미세립 복합재료, 한국분말야금학회지, , 19, 204-209 (2012)
  • 고압비틀림 공정을 이용한 구리 분말의 치밀화, 한국분말야금학회지, , 19, - (2012)
  • 수분사법으로 제조된 순철분말의 성형성에 미치는 분말크기의 영향, 한국분말야금학회지, , 18, 221-225 (2011)
  • 분말 표면 조도의 3차원 레이저 분석기를 이용한 정량화와 압분성형체 강도에 미치는 영향 분석, 한국분말야금학회지, , 18, 406-410 (2011)
  • 수분사법으로 제조된 순철 분말의 고압비틀림 성형 공정에 의한 치밀화 및 나노결정화, 한국분말야금학회지, , 18, 411-416 (2011)
  • 하이브리드 합금 설계 및 멀티성능 안정화 기술, 재료마당, , , - (2011)
  • 고상변형제어 금속복합소재 기술 개발, 재료마당, , , - (2011)
  • 나노결정립 금속재료의 변형기구지도, 소성가공, , 16, 473-478 (2007)
  • 분말 ECAP 공정에 미치는 금형 모서리각 효과에 대한 유한요소해석, 한국분말야금학회지, , 14, 26-31 (2007)
  • 유한요소법을 이용한 마그네슘 분말의 냉간정수압 공정시 치밀화 거동 해석, 한국분말야금학회지, , 14, 362-366 (2007)
  • 정면압력 ECAP 공정의 유한요소해석, 대한금속·재료학회지, , 45, 473-477 (2007)
  • IF강의 미세조직과 경도에 미치는 ECAP 가공온도와 가공횟수의 효과, 소성가공, , 16, 406-411 (2007)
  • In-Situ 측정에 의한 나노 Cu 분말의 소결 공정 시 치밀화 거동, 소성가공, , 16, 210-214 (2007)
  • 금속분말의 고압비틀림 성형시 나노결정화, 소성가공, , 16, 360-363 (2007)
  • 분말 ECAP 공정 시 치밀화의 유한요소해석, 한국분말야금학회지, , 13, 415-420 (2006)
  • 분말ECAP 공정으로 제조된 탄소나노튜브/Cu 나노복합재료의 기계적 성질, 소성가공, , 15, 360-365 (2006)
  • 비틀림압출 공정을 통한 금속재료의 소성변형, 대한금속·재료학회지, , 44, 480-484 (2006)
  • 연속 회전 등통로각압축 공정의 유한요소해석, 소성가공, , 15, 524-528 (2006)
  • 전위쎌에 기초한 미세조직 구성모델을 이용한 ECAP 공정 시 소성변형과 미세조직의 진화, 소성가공, , 15, 441-444 (2006)
  • ECAP공정을 이용한 분말의 치밀화, 한국분말야금학회지, , 13, 124-128 (2006)
  • Equal Channel Angular Pressing 가공 중 소성 변형에 미치는 재료의 초기 형상 효과, 소성가공, , 15, 382-386 (2006)
  • 나노구조재료의 소성변형 성질의 변형률속도 의존성, 소성가공, , 14, 65-70 (2005)
  • 나노 구리 분말의 냉간정수압 공정에 대한 치밀화 거동 해석, 한국분말야금학회지, , 11, 341-347 (2004)
  • 나노결정 재료의 상혼합모델과 유한요소법을 결합한 멀티스케일 모델링, 소성가공, , 13, 174-179 (2004)
  • 미세조직기반 구성모델을 이용한 고크롬강의 크리프 거동 해석, 소성가공, , 13, 160-167 (2004)
  • 벌크비정질합금의 미세성형 : 구성모델과 적용, 소성가공, , 13, 168-173 (2004)
  • 분말 응집체의 치밀화에 관한 모델, 한국분말야금학회지, , 11, 301-307 (2004)
  • 인장시험 시 불안정과 네킹 거동의 유한요소해석, 대한금속·재료학회지, , 42, 662-666 (2004)
  • 급속응고 AL-20 WT% SI 합금분말 압출재의 ECAP, 한국분말야금학회지, , 11, 97-104 (2004)
  • 급속응고 AL-20 WT% SI 합금 분말의 ECAP를 통한 고형화, 한국분말야금학회지, , 11, 233-241 (2003)
  • 비정질 나노복합재료의 강화기구에 대한 이론적 검증, 대한금속·재료학회지, , 40, 965-969 (2002)
  • 2축 정렬된 NI모재 위에 MOCVD법에 의해 증착된 NIO의 집합도와 표면조도, 한국초전도·저온공학회논문지, , 4, 5-10 (2002)
  • 나노재료 입계상의 소성변형에 대한 입계확산크립 모델, 소성가공, , 10, 383-388 (2001)
  • 나노크기 NI-FE 합금입자 분산 AL2O3 나노복합재료의 합성 및 특성, 한국재료학회지, , 11, 986-990 (2001)
  • 연속다단 ECAP 공정의 유한요소해석, 대한금속·재료학회지, , 39, 360-366 (2001)
  • 입자가 균일하게 분포된 복합체의 기계적 성질과 혼합률에 관한 수치적 연구, 소성가공, , 10, 396-401 (2001)
  • 프레스경화 공정 시 강판의 열-변형 거동의 유한요소해석과 실험적 연구, 대한금속·재료학회지, , 39, 1076-1083 (2001)
  • CU-NB 미세 복합재료의 강화기구에 대한 연구, 대한금속·재료학회지, , 39, 435-440 (2001)
  • MODELLING STRENGTH AND DUCTILITY OF NANOCRYSTALLINE METALLIC MATERIALS, 한국분말야금학회지, , 8, 168-173 (2001)
  • PROCESSING OF NANO-SIZED METAL ALLOY DISPERSED AL2O3 NANOCOMPOSITES, 한국분말야금학회지, , 8, 157-162 (2001)
  • 냉간소결법과 그 응용, 한국분말야금학회지, , 7, 117-122 (2000)
  • 등통로각압축 (ECAP) 공정에서 다이 마찰효과에 대한 수치적 연구, 소성가공, , 9, 219-225 (2000)
  • 등통로각압축 (ECAP) 공정의 유한요소해석, 대한금속·재료학회지, , 38, 136-140 (2000)
  • 양분된 시편의 압입 거동 해석, 대한금속·재료학회지, , 38, 442-446 (2000)
  • 열간정수압압축 시 확산기구 및 POWER-LAW크립기구를 고려한 분말 치밀화거동의 모델링, 한국분말야금학회지, , 7, 137-142 (2000)
  • 입자강화 초미세 복합재료의 상혼합모델, 대한금속·재료학회지, , 38, 357-365 (2000)
  • 통합 점소성 구성모델을 이용한 분말 압분체의 치밀화, 대한금속·재료학회지, , 38, 817-822 (2000)
  • ECAP 공정에서 모서리 틈 형성에 미치는 재료의 가공경화 및 마찰의 효과, 대한금속·재료학회지, , 38, 1670-1674 (2000)
  • POWER-LAW 크립 모델을 이용한 분말의 치밀화 해석, 대한금속·재료학회지, , 38, 811-816 (2000)
  • 기공이 있는 나노결정 재료의 탄성계수에 대한 상혼합모델, 대한금속·재료학회지, , 38, 620-623 (2000)
  • 부분결정화된 비정질 AL합금의 강화에 대한 모델, 대한금속·재료학회지, , 37, 1333-1336 (1999)
  • AL 비정질합금의 취화현상에 대한 모델, 대한금속·재료학회지, , 37, 288-294 (1999)
  • ZIRCALOY-4 핵연료 피복관의 온도에 따른 연성변화, 대한금속·재료학회지, , 37, 1482-1486 (1999)
  • 나노결정재료의 경도에 관한 복합재료모델, 대한금속·재료학회지, , 36, 2080-2084 (1998)
  • 분말성형의 이론적 해석과 그 응용, 한국분말야금학회지, , 5, 83-88 (1998)
  • 알루미늄 비정질합금의 소성가공에 의한 덩어리 제조, 소성가공, , 7, 419-425 (1998)
  • 급속응고 AL-14WT%NI-14WT%MM 합금분말 압출재의 미세조직과 기계적 성질, 대한금속·재료학회지, , 36, 2119-2126 (1998)
  • 급속응고 AL-NI-MM 합금분말의 온간압분, 대한금속·재료학회지, , 36, 2127-2133 (1998)
  • 급속응고 AL-SI계 합금의 단조공정에 대한 유한요소 해석, 한국분말야금학회지, , 5, 57-63 (1998)
  • 나노결정 구리의 기계적 거동의 수치적 연구, 대한금속·재료학회지, , 35, 967-972 (1997)
  • 열간분말 단조 공정의 열탄소성 유한요소해석, 한국분말야금학회지, , 4, 83-89 (1997)
  • 급속응고 AL-SI 합금분말의 항복과 압축거동, 소성가공, , 6, 145-151 (1997)
  • 급속응고 AL-SI합금의 압출가공에 대한 유한요소해석, 한국분말야금학회지, , 3, 260-265 (1997)
  • 나노결정 재료의 탄성,소성 성질의 수치적 연구, 대한금속·재료학회지, , 34, 1436-1440 (1996)
  • 분말단조 공정의 3차원 유한요소 해석, 한국분말야금학회지, , 3, 104-111 (1996)
  • 원심분무 입자의 비산 및 냉각 모델링, 한국분말야금학회지, , 3, 25-32 (1996)
  • 유한요소해석을 이용한 다공질 금속의 성형한계 예측, 대한금속·재료학회지, , 34, 100-104 (1996)
  • 초기불균질 밀도분포 다공질금속의 소성변형, 대한금속·재료학회지, , 33, 1686-1689 (1995)
  • 수지복합 강판 굽힘 가공의 유한요소해석, 대한금속·재료학회지, , 32, 403-410 (1994)
  • 강판의 연속아연도금 공정의 열전달 해석과 그 응용, 대한금속·재료학회지, , 32, 188-195 (1994)
  • 다공질 금속의 항복조건, 대한금속·재료학회지, , 30, 656-663 (1992)
  • 정수압을 받는 다공성 금속 소결체의 치밀화 과정, 대한금속·재료학회지, , 30, 37-42 (1992)
  • 다공성 금속 원주 시편의 압축성형에 대한 탄소성 유한요소해석, 대한금속·재료학회지, , 29, 703-708 (1991)
  • 피복 선재 신선의 탄소성 유한요소해석, 대한금속·재료학회지, , 29, 598-602 (1991)
  • 쾌삭 황동의 연속주조시 열전달과 응고조직, 대한금속·재료학회지, , 27, 1085-1093 (1989)

General Journal Papers

  • Prediction of Extrusion Pressure in Vortex Extrusion Using a Streamline Approach, IRANIAN JOURNAL OF MATERIALS FORMING, , 4, 52-62 (2017)
  • Continuum understanding of twin formation near grain boundaries of FCC metals with low stacking fault energy, NATURE PARTNER JOURNAL- COMPUTATIONAL MATERIALS, , 3, - (2017)
  • 고엔트로피 합금 개발 및 산업화 전력, 재료마당, , 30, 8-15 (2017)
  • Simulation of Ti-6Al-7Nb alloy processing by equal-channel angular pressing (ECAP) using the finite element method, Tecnologia en Marcha, , 30, 25-36 (2017)
  • Effect of Revolution on Inhomogeneous Deformation of IF Steel in High Pressure Torsion, Materials Sciences and Applications, , 7, 673-679 (2016)
  • Toward architecturing of metal composites by twist extrusion, Materials Research Letters, , 3, 161-168 (2015)
  • Fabrication of silicon carbide quantum dots via chemical-etching approach and fluorescent imaging for living cell, Materials Sciences and Applications, , 5, 177-182 (2014)
  • Effect of Fabrication Process Parameters on Microstructure Evolution and Spectral Characteristics of Silicon Carbide Quantum Dots, JOURNAL OF THE CHINESE CERAMIC SOCIETY, , 1, 93-98 (2014)
  • Inhomogeneous Hardness Distribution of High Pressure Torsion Processed IF Steel Disks, Materials Sciences and Applications, , 3, 234-239 (2012)
  • Hot Workability of Ultrafine-Grained Aluminum Alloy Produced by Severe Plastic Deformation of Al6063 Powder and Consolidation, materials science forum, , 667, 979-984 (2011)
  • Effect of diluting agent Al2O3 on the combustion velocity of NiO/Al aliminothermic system and apparent activation energy calculations, Acta Materiae Compositae Sinica, , , - (2011)
  • Process mechanism of wear-resisting gradient borides material on cast surface by FEM analysis of temperature field, Transactions of the CSAE, , 27, 184-188 (2011)
  • Effect of diluting agent Al2O3 on the combustion velocity of NiO/Al aluminothermic system and apparent activation energy calculations, Acta Materiale Compositae Sinica, , 28, 153-158 (2011)
  • Adiabatic Shear Banding in an Al-Mg-Si Alloy Processed by Equal Channel Angular Pressing, Mater. Sci. Forum, , , - (2010)
  • ANALYTICAL AND NUMERICAL MODELLING OF STRAIN AND STRAIN RATE IN EQUAL CHANNEL ANGULAR PRESSING (ECAP), KEY ENGINEERING MATERIALS, , , 965-970 (2005)
  • DEFORMATION MECHANISMS OF NANOCRYSTALLINE MATERIALS, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 709-714 (2005)
  • MECHANICAL MODELLING OF CARBON NANOTUBE REINFORCED METAL MATRIX COMPOSITES, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 24-25, 383-386 (2005)
  • Densification Modelling for Nanocrystalline Metallic Powders, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 140, 401-406 (2003)
  • DISLOCATION AND CELL EVOLUTION MODEL BASED FINITE ELEMENT ANLYSIS DURING EQUAL CHANNEL ANGULAR PRESSING, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 231-234 (2003)
  • EFFECT OF ΜM-ZRC DISPERSOIDS AND NANOPRECIPITATES ON MECHANICAL PROPERTIES OF CUZRTI BULK GLASSES, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 15-16, 161-166 (2003)
  • Analysis of the tensile deformation behaviour of nanocrystalline metals - A multi-scale approach, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , 15-16, 227-230 (2003)
  • STRENGTHENING BEHAVIOUR OF DEVTRIFIED AMORPHOUS NANOCOMPOSITES, JOURNAL OF METASTABLE AND NANOCRYSTALLINE MATERIALS, , , 205-208 (2003)
  • 컴퓨터 시뮬레이션을 이용한 입자복합재료의 기계적 성질 해석, 재료마당, , 14, 55-61 (2001)
  • 다공질, 비정질, 나노결정 재료의 변형 거동, DEPARTMENT SEMINAR, , 4, - (1999)

Conference Proceedings

  • Effect of Initial Grain Size of Twinning-Induced Plasticity Steel on Severe Plastic Deformation, International Workshop on Giant Straining Process for Advanced Materials (GSAM2017), 0, 0, - (2017)
  • Finite Element Analysis of Plastic Deformation Behavior for Multi-Filament Extrusion, HYMAP2, 0, 0, - (2011)
  • Densification and nanocrystallization of metallic powders in cold sintering using high pressure torsion, SINTERING12, 0, 0, - (2011)
  • Dislocation density-based finite element analysis for plastic deformation behavior of high pressure torsion, THE 3RD INTERNATIONAL SYMPOSIUM- BULK NANOSTURCTURED MATERIALS, 0, 0, - (2011)
  • Deformation behaviour of copper during the compression stage of high pressure torsion, NONOSPD3, 0, 0, - (2011)
  • Visioplisticity and shear banding in bulk metallic glasses, THE 8TH INTERNATIONAL CONFERENC ON BULK METALLIC GLASSES, 0, 0, - (2011)
  • Strain Rate Effect on Room Temperature Deformation Behavior in Zr55Al10Ni5Cu30 Bulk Metallic Glasses, BMG, 0, 0, - (2011)
  • Dislocation cell mechanism-based finite element analysis for plastic deformation behavior and microstructural, NANOSPD, 0, 0, - (2011)
  • Fabrication of AZ31/AL2O3 Nanocomposites by Friction Stir Processing, NANOSPD, 0, 0, - (2011)
  • Hot Workability of Ultrafine-Grained Aluminum Alloy Produced by Severe, NANOSPD5, 0, 0, - (2011)
  • Adiabatic Shear Banding in an Al-Mg-Si Alloy Processed by Equal, NANOSPD5, 0, 0, - (2011)
  • Grain refinement of carbon nanotubes reinforced copper matrix composites by high pressure torsion, ISNNM10, 0, 0, - (2009)
  • Deformation Mechanism-Based Simulations for Nanomaterials, INTERNATIONAL SYMPOSIUM ON NANO AND AMORPHOUS MATRIALS, 0, 0, - (2009)
  • Densification Simulation in Extrusion of Gas Atomized Metallic Powders, BMG7, 0, 0, - (2009)
  • Free-volume Model Based Finite Element Analysis for Deformation Behavior of Bulk Metallic Glasses, 2ND ASIAN WORKSHOP ON MICRO/NANO FORMING TECHNOLOGY, 0, 0, - (2009)
  • ENAHNCEMENT OF EQUAL CHANNEL ANGULAR PRESSING COMBINED WITH EXTRUSION, 2009 ANNUAL MEETING OF MATERIALS RESEARCH SOCIETY OF CHINA, 0, 0, - (2009)
  • UNDERSTANDING OF EQUAL CHANNEL ANGULAR PRESSING COMBINED WITH EXTRUSION, THERMEC, 0, 0, - (2009)
  • Finite Element Analysis of the Plastic Deformation Behavior of TWIP Steels, 5TH KOREA-CHINA JOINT SYMPOSIUM ON STEEL, 0, 0, - (2009)
  • Effect of microstructure on the compressive deformation and fracture behavior of Zr-based BMG Tube, 4TH INTERNATIONAL SYMPOSIUM ON NANO-BIO AND AMORPHOUS MATERIALS, 0, 0, - (2009)
  • Finite Element Analysis for the Densification Behavior of Rapidly Solidified Magnesium Powders, 5TH KITECH-KU SYMPOSIUM ON BULK METALLIC GLASSES AND ADVANCED MATERIALS, 0, 0, - (2009)
  • Finite Element Analysis of the Plastic Deformation Behavior of TWIP Steels, ASIA STEEL 20009, 0, 0, - (2009)
  • Modeling of microstructure evolution in ECAP, PLASTICITY 2009, 0, 0, - (2009)
  • Constitutive Model and Finite Element Analysis of Nanocrystalline Metallic Materials, NANOTECHNOLOGY INTERNATIONAL FORUM, 0, 0, - (2008)
  • 저온분사 공정의 유한요소해석, 한국문말야금학회, 0, 0, - (2008)
  • Modeling of Elasticity of Carbon Nanotube Reinforced Metal Matric Nanocomposites, THE 1ST INTERNATIONAL SYMPOSIUM ON HYBRID MATERIALS AND PROCESSING, 0, 0, - (2008)
  • STRENGTH OF CARBON NANOTUBE REINFORCED CU MATRIX NANOCOMPOSITES, ASIA PACIFIC CONFERENCE ON ENGINEERING PLASTICITY AND ITS APPLICATION, 0, 0, - (2008)
  • Multi-scale simulation of severe plastic deformation, THE FIFTH INTERNATIONAL CONFERENCE ON ADVANCED MATERIALS AND PROCESSING, 0, 0, - (2008)
  • Multi-Scale Simulation of the Plastic Deformation of Nanocrystalline Metallic Materials, 11TH INTERNATIONAL SYMPOSIUM ON PHYSICS OF MATERIALS, 0, 0, - (2008)
  • Mechanical Modeling of Carbon Nanotube Reinforced Nanocomposites, 3RD INTERNATIONAL WORKSHOP ON NANO-BIO AND AMORPHOUS MATERIALS, 0, 0, - (2008)
  • Finite element analysis based on the phase mixture model for tensile deformation behavior of nanocrystalline metallic materials, 8TH ASIA PACIFIC CONFERENCE ON MATERIALS PROCESSING (8TH APCMP), 0, 0, - (2008)
  • Finite element and experimental analyses of repetitive bending and straightening of commercially pure copper, 8TH ASIA PACIFIC CONFERENCE ON MATERIALS PROCESSING, 0, 0, - (2008)
  • Finite element simulation of carbon nanotube reinforced metal matrix nanocomposites, 8TH ASIA PACIFIC CONFERENCE ON MATERIALS PROCESSING, 0, 0, - (2008)
  • Computer Simulation on the Processing and Mechanical Behavior of Bulk Metallic Glasses, ., 0, 0, - (2008)
  • Achieving both Powder Consolidation and Grain Refinement by Equal Channel Angular Pressing, Key. Eng. Mater., 0, 0, 173-176 (2007)
  • Multi-Scale Modelling Scheme for Carbon Nanotube Reinforced Metal Matrix Composites, Key. Eng. Mater., 0, 0, 1261-1264 (2007)
  • Deformation Mechanism Map of Nanocrystalline Metallic Materials, Mater. Sci. Forun, 0, 0, 2816-2819 (2007)
  • Processing Conditions and Mechanical Properties of Fine Grained Mg by Equal Channel Angular Pressing, Key. Eng. Mater., 0, 0, 913-918 (2007)
  • Process modelling of equal channel multi-angular pressing, Process modelling of equal channel multi-angular pressing, US-Korea Workshop on Advanced in Metalli, 0, 0, - (2003)
  • Deformation behaviour of ECAP Cu as Described by Dislocation Model, NANOSPD2, 0, 0, - (2002)
  • EQUAL CHANNEL ANGULAR PRESSING OF METALLIC POWDERS, The 2nd International Conference on advanced Materials Processing (ICAMP2002),, 0, 0, - (2002)
  • Evolution of Mechanical and Microstructural Properties of ECAP Deformed Copper, NANOSPD2, Vienna, 2002.12, 0, 0, - (2002)
  • Modelling Mechanical Properties of Nanocrystalline metals, The 2nd International Conference on advanced Materials Processing (ICAMP2002),, 0, 0, - (2002)
  • Modelling of Deformation Behaviour and Texture of ECAP De formed Aluminium, NANOSPD2, 0, 0, - (2002)
  • Process Modelling of Equal Channel multi-Angular Pressing, NANOSPD2, 0, 0, - (2002)
  • Superplastic behavior of deformation processed cu-Ag nanocomposites, NANOSPD2, 0, 0, - (2002)
  • Calculation of Deformation Behavior During Equal Channel Angular Pressing Using Dislocation Based Modeling of Strain Hardening, ICOTOM13, 0, 0, - (2002)
  • STRENGTH AND DUCTILITY OF ULTRAFINE GRAINED COPPER: MODELLING AND EXPERIMENT, 2nd Workshop on Nanomaterials: Fundamentals and Applications, Instituto de Ciencia de Materiales de, 0, 0, - (2002)
  • Deformation behaviour of nanocrystalline copper, in Advances on Chemical Engineering and New Materials Science, Advances on Chemical Engineering and New Materials Science, 0, 0, - (2002)
  • DENSIFICATION MODELLING FOR NANOCRYSTALLINE METALLIC POWDERS, ISMANAM2002, 0, 0, - (2002)
  • EFFECTS OF mm-ZrC DISPERSOIDS AND NANOPRECIPITATES ON MECHANICAL PROPERTIES OF CuZrTi BULK GLASSES, ISMANAM2002, 0, 0, - (2002)
  • Effect of equal channel angular pressing on microstructure and tensile properties of pure copper, Proceedings of the First Russian-French Symposium on Physics and Mechanics at Large Plastic Strains, 0, 0, - (2002)
  • Deformation Behaviour during Equal Channel Angular Pressing for Ultrafine Grained Metals, ISMANAM2001, 0, 0, - (2001)
  • Microstructure and Mechanical Properties of Amorphous Zr65Cu20Ni10Nb5 Alloy, ISMANAM2001, 0, 0, - (2001)
  • Modelling of Plasticity of Nanocrystalline Metallic Materials, ISMANAM2001, 0, 0, - (2001)
  • Finite Element Analysis of High Pressure Torsion Processing,, APCMP5, 0, 0, - (2001)
  • Heavily Deformed Cu-Fe-Ag and Cu-Fe-Cr Microcomposites, APCMP5, 0, 0, - (2001)
  • Plastic Deformation of Metals during Equal Channel Angular Pressing, APCMP5, 0, 0, - (2001)
  • Inhomogeneous Deformation Behaviour during Equal Channel Multi-Angular Pressing, LiMat2001, 0, 0, - (2001)
  • 시효처리된 Al6061합금의 ECAP 시 변형거동, 비평형 벌크재료 심포지움, 0, 0, - (2001)
  • 알루미나분말의 상압소결 시 치밀화 거동, 춘계학술대회, 한국분말야금학회, 0, 0, - (2001)
  • 연속 다단 ECAP 공정의 유한요소해석, 비평형 벌크재료 심포지움, 0, 0, - (2001)
  • 프레스경화 공정 시 열-변형 유한요소해석을 통한 강도와 재질 예측, 춘계학술대회, 대한금속학회, 0, 0, - (2001)
  • Al2O3분말의 냉간정수압압축 시 치밀화 거동, 춘계학술대회, 대한금속학회, 0, 0, - (2001)
  • ECAP거동 시 변형거동에 미치는 마찰의 효과, 비평형 벌크재료 심포지움, 0, 0, - (2001)
  • YBCO초전도체 coating을 위한 Ni tape 제조, 춘계학술대회, 대한금속학회, 0, 0, - (2001)
  • 비정질 기지 나노복합재료의 개발, 제25회 자원활용소재워크샵, 초청강연, 0, 0, 35-48 (2000)
  • 연속다단 ECAP 공정 중 금속의 불균질 변형거동, 제14회 재료강도심포지엄, 0, 0, 363-371 (2000)
  • 전위밀도에 기초한 금속 압분체의 구성 모델, 추계학술대회, 한국분말야금학회, 0, 0, 30- (2000)
  • Constitutive Modelling of Plasticity of Nanocrystalline Metallic Materials,, MRS Fall Meeting, 0, 0, - (2000)
  • Press Hardening 공정을 이용한 자동차 경량부품 개발, 제 7회 철강기술 심포지엄, 0, 0, - (2000)
  • 결정화법으로 제조된 비정질기지 나노복합재료의 강화기구, 복합재료심포지엄, 0, 0, 57- (2000)
  • 구리의 고압 비틀림 공정 시 재료 변형거동, 추계학술대회, 대한금속학회, 0, 0, 129- (2000)
  • 기공이 있는 입자강화 나노복합재료의 탄성계수, 추계학술대회, 대한금속학회, 0, 0, 199- (2000)
  • 확산과 power-law 크립을 고려한 압분체 열간정수압압축 공정의 해석, 한국소성가공학회 추계학술대회 논문집, 0, 0, 66-69 (2000)
  • ECAP 공정 기 소성유동과 균일변형에 미치는 가공경화와 변형속도민감도의 효과, 추계학술대회, 대한금속학회, 0, 0, 84- (2000)
  • ECAP 공정 시 변형거동에 비치는 preform 형상의 효과, 추계학술대회, 대한금속학회, 0, 0, 200- (2000)
  • 초미세 금속 분말의 치밀화 거동에 관한 이론적 해석, 고기능나노복합재 워크샵, 0, 0, - (2000)
  • ECAP 공정 중 금속의 변형거동에 관한 연구, 제3회 국방소재 학술대회 논문집, 0, 0, - (2000)
  • A Model on the Strengthening and Embrittlement of Devitrified Nanocmoposites,, Fourth International Conference on Fracture & Strength of Solids, Pohang, KOREA (Aug. 16-18, 2000), 0, 0, - (2000)
  • Constitutive Modelling of Strength and Plasticity of Nanocrystalline Material, ICSMA12 (the 12th Intl. Conference on Strength of Materials), Asilomar, California, USA, Aug. 27-Se, 0, 0, - (2000)
  • Modellig of Equal Channel Angular Pressing for Ultrafine-Grained Materials, Nano2000, Sendai, Japan., 0, 0, - (2000)
  • Strength and Fracture of Cu-based Filamentary Nanocomposites, Fourth International Conference on Fracture & Strength of Solids, Pohang, KOREA (Aug. 16-18, 2000), 0, 0, - (2000)
  • Strength and Fracture of Cu-based Filamentary Nanocomposites,, Nano2000, Sendai, Japan., 0, 0, - (2000)
  • 재료결정립계상의 입계확산크립 모델, 한국소성가공학회춘계학술대회논문집, 0, 0, 192-195 (2000)
  • 초미세재료의 소성변형 거동, 대한금속.재료학회춘계학술대회논문집, 0, 0, 92- (2000)
  • A Unificed Viscoplastic Model for Powder Compaction, TMS abstract, 0, 0, - (2000)
  • Brittle-ductile transition od Partially Crystallized Amorphus Al Alloys, TMS abstract, 0, 0, - (2000)
  • Cu-Nb 미세복합재료의 Nd 함량에 따른 강도와 연성의 변화, 대한금속.재료학회 춘계학술대회논문집, 0, 0, 155- (2000)
  • ECAP 공정 시 소성유동과 변형불균일의 유한요소해석, 구조용 초미세립 알루미늄합금 심포지움, 0, 0, - (2000)
  • ECAP 공정 시 온도증가 해석, 대한금속.재료학회춘계학술대회논문집, 0, 0, 168- (2000)
  • ECAP공정에서 모서리 틈 발생에 관한 이론적 연구, 대한금속.재료학회춘계학술대회논문집, 0, 0, 91- (2000)
  • 나노분말의 벌크화 기술, 조선대학교 전자부품.재료 설계인력교육센터 강좌, 0, 0, - (2000)
  • 나노결정재료의 탄성계수에 대한 수치적 연구, '99 추계학술대회 논문집, 대한금속학회, 인하대학교, 0, 0, 214- (1999)
  • 나노복합재료의 기계적 성질에 대한 모델, 제13회 재료강도심포지엄 논문집, 0, 0, 151-158 (1999)
  • 양분된 시편의 압흔, '99 추계학술대회 논문집, 대한금속학회, 인하대학교, 0, 0, 66- (1999)
  • 열간정수압 압축공정에 대한 치밀화 모델, 한국분말야금학회 추계학술강연대회, 0, 0, 12- (1999)
  • 철분말 압축에 미치는 고체윤활제 영향 연구, 대한금속학회 추계학술대회 논문집, 0, 0, 17- (1999)
  • Al 비정질 합금의 연성-취성 천이현상, 한국분말야금학회 춘계학술대회, 0, 0, - (1999)
  • Power-Law크립모델을 이용한 HIP 공정 중의 치밀화 거동, 제9회 분말야금 심포지엄, 0, 0, 42- (1999)
  • 등통로 각압축 공정의 유한요소해석, '99 추계학술대회 논문집, 대한금속학회, 인하대학교, 0, 0, - (1999)
  • Bonded-interface Test for Carbon Fibre/Epoxy Laminate Specimens, International conference on Composites, Sydney, 0, 0, - (1999)
  • Deformtion Behaviour of Porous, Amorphous and Nanocrystalline Materials, Internation Conference for Composites, Sydney, 0, 0, - (1999)
  • Mechanical Properties of Partially Crystallized Amorphous Alloys, Tenth International Conference on Rapidly Quenched and Metastable Materials, India, 0, 0, 2-5 (1999)
  • 5083Al 합금의 간접용탕단조시 응고거동과 미세조직에 미치는 다이형상의 영향, 한국재료학회, 충남대학교, 0, 0, - (1998)
  • 국부적으로 결정화된 Al-Ni-Y 합금의 취화거동, 대한금속학회 추계학술대회, 0, 0, - (1998)
  • 급속응고 Al-Ni-Mm 합금분말 압출재의 기계적 성질, '98 춘계학술대회 논문집, 한국소성가공학회, 경북대학교, 0, 0, 100-103 (1998)
  • 급속응고된 Al-14%Ni-14%Mm (misch metal) 합금분말 압출재의 미세조직과 기계적 성질의 관계, '98 춘계학술발표대회, 부산대학교, 대한금속학회, 0, 0, 89- (1998)
  • Zr합금의 재결정에 미치는 Sn, V, Sb의 영향, '98춘계학술발표대회 논문집, 한국원자력학회, 경희대학교, 0, 0, - (1998)
  • Analysis of Deformation of Porous Metals, 'Porous and Cellular Materials for Structural Applications', Materials Research Society Symposium P, 0, 0, 33-38 (1998)
  • Mechanical Properties of Partially Crystallized Amorphous Alloys, PRICM-3, Hawai, 0, 0, - (1998)
  • On the Modelling of Ultra-Fine Grained Materials, ISMANAM-98 (International Symposium on Metastable, Mechanically Alloyed and nanocrystalline Materia, 0, 0, 437-442 (1998)
  • 나노결정금속의 경도의 결정립도의존성에 관한 연구, '97 춘계학술발표대회논문집, 한국소성가공학회, 강원대학교, 0, 0, 73-76 (1997)
  • 열간압분한 급속응고 Al-Ni-Mm 합금의 미세조직 및 기계적 성질, 97 춘계학술발표대회, 대한금속학회, 강원대학교, 0, 0, 107- (1997)
  • 열역학 계산에 의한 Al-Mg-Y계의 유리형성영역의 예측, '97추계학술발표대회, 국민대학교, 대한금속학회, 0, 0, 290- (1997)
  • Al-Si 합금분말의 압축과 항복거동, '97 춘계학술발표대회, 한국분말야금학회, 0, 0, - (1997)
  • 급속응고 Al-Si계 합금의 2단 압축가공, '97 춘계학술발표대회, 대한금속학회, 강원대학교, 0, 0, 108- (1997)
  • Al2O3/Al-Mg-Si 복합재료의 마모거동의 이방성에 관한 수치적 연구, '97 춘계학술발표대회, 대한금속학회, 강원대학교, 0, 0, 255- (1997)
  • Consolidation, Plasticity and Mechanical Behavior of Gas Atomized Al-Ni-Mm Powders, The 3rd OCAMAC-RASOM Joint Seminar, 0, 0, - (1997)
  • Densification of Rapidly Solidified Aluminium Alloy Powders, '97 TMS Annual Meeting, Orlando, USA, 0, 0, - (1997)
  • Modeling of Plasticity in Porous Materials, MML (Materials Modeling Lab.) Seminar, Mept. Materials, Univ. Oxford, 0, 0, - (1997)
  • Thermo-mechanical Behaviors of Al-Ni-Mm Amorphous Alloys, '97 TMS Annual Meeting, Orlando, USA, 0, 0, - (1997)
  • 급속응고 Al-Si 합금의 압축거동의 실험과 수치적 연구, '96 추계학술발표대회, 대한금속학회, 한양대학교, 0, 0, 343- (1996)
  • 나노결정 구리의 기계적 성질의 복합재료모델에 관한 연구, 한국복합재료학회 추계학술대회논문집, 0, 0, 154- (1996)
  • 나노결정 재료의 소성거동의 수치해석적 연구, '96 추계학술발표대회, 대한금속학회, 한양대학교, 0, 0, 77- (1996)
  • 나노결정 재료의 Hall-Petch 거동에 관한 수치해석적 연구, 제 10회 재료강도 심포지엄, 0, 0, 113-120 (1996)
  • 다공질 금속 링 압축 시 마찰계수의 상대밀도 의존성 연구, '96 춘계학술발표대회, 대한금속학회, 대전산업대학교, 0, 0, 68- (1996)
  • 원심분무공정의 비산 및 냉각 모델링, '96 춘계학술발표대회, 대한금속학회, 대전산업대학교, 0, 0, 43- (1996)
  • Al-Mg/Al2O3 복합재료의 미세구조와 기계적 성질, '96 추계학술발표대회, 대한금속학회, 한양대학교, 0, 0, 75- (1996)
  • Al-Ni-Mm 비정질합금의 열처리 거동, '96 추계학술발표대회, 대한금속학회, 한양대학교, 0, 0, 176- (1996)
  • 급속응고 Al-Si 합금의 압축거동에 관한 연구, '96 춘계학술발표대회, 대한금속학회, 대전산업대학교, 0, 0, 191- (1996)
  • 열간분말단조 공정의 열탄소성 유한요소해석, '96 춘계학술발표대회, 한국분말야금학회, 0, 0, 163- (1996)
  • Plastic Deformation of Porous Metal with Initial Inhomogeneous Density Distribution, Proceedings of The International Conference on Modelling and Simulation in Metallurgical Engineering, 0, 0, 654-657 (1996)
  • Thermo-mechanical Properties of Al-Ni-Sr Amorphous Alloys, Proceedings of ISAPM-2 (The 2nd International Symposium on Advanced PM Processing), 0, 0, - (1996)
  • 급속응고 Al합금을 이용한 압출공정의 유한요소해석, '95 추계학술발표대회, 대한금속학회, 홍익대학교, 0, 0, 154- (1995)
  • 다공질 금속의 가공을 위한 소성이론, '95 추계 학술 발표 대회, 대한금속학회, 홍익대학교, 0, 0, 155- (1995)
  • 초기 불균질 밀도분포 다공질 금속의 소성변형해석, '95 추계학술발표대회, 대한금속학회, 홍익대학교, 0, 0, 163- (1995)
  • Finite Element Analysis of Deformation of Porous Materials, Seminar for OCAMAC-RASOM Joint Research Programme Supported by the Korea Science and Engineering Fou, 0, 0, - (1995)
  • 소결금속의 링압축을 통한 마찰계수의 결정에 관한 연구, 94년 춘계학술강연 및 발표개요집, 0, 0, 194- (1994)
  • 다공성 금속 소결체의 소성변형거동, 제 5 회 분말야금 심포지엄 논문집, 대한금속학회, 서울대학교, 0, 0, -5 (1993)
  • 분말소결금속 압흔의 유한요소해석, '93 춘계학술대회 논문집,, 0, 0, 20- (1993)
  • 인너실드용 극박냉연강판의 개발, 압연심포지엄, '93 추계학술대회 논문집, 한국소성학회, 대한금속학회, 서울대학교, 0, 0, 58- (1993)
  • Analysis of Deformation of Porous Metals, PLASTICITY '93 : Fourth International Symposium on Plasticity and Its Current Applications, Interna, 0, 0, - (1993)
  • 다공질 금속의 소성 항복 거동, 김동원 교수 정년퇴임 기념 논문집, 서울대학교 공과대학 기계동문회, 0, 0, 1- (1992)
  • 다공질 금속의 소성변형 해석, 제4회 분말야금 심포지엄 논문집, 대한금속학회, RIST, 0, 0, 67- (1992)
  • 동복 Fe-Ni 합금선의 인발 시 변형 거동, 압출신선 심포지엄, '92 추계학술대회 논문집, 한국소성가공학회, 과기대, 0, 0, 9- (1992)
  • Finite Element Analysis of Deformation of Porous Materials, The First Pacific Rim Conference on Advanced Materials and Processing (PRCIM-1), The Minerals, Meta, 0, 0, 1733-1743 (1992)
  • Analysis of Deformation of Porous Metals, Advanced Materials Proc. of Korea-U.S. Joint Symposium on Advanced Materials, 0, 0, 156-166 (1992)
  • 다공질 금속의 소성항복 거동, 김동원 교수 정년 기념 및 '92 춘계학술대회 논문집, 한국소성가공학회, 반도출판사, 서울대학교, 0, 0, 59- (1992)
  • 다공성 금속 성형의 탄소성 유한요소해석, '91 춘계학술발표대회, 대한금속학회, 포항공대, 0, 0, - (1991)
  • 분말 단조의 유한요소해석, '91 단조 심포지엄 논문집, 한국소성가공학회, 반도출판사, 서울대학교, 0, 0, 7- (1991)
  • 분말 압축 공정의 탄소성 유한요소해석, 제3회 분말야금 심포지엄 논문집, 대한금속학회, 한양대학교, 0, 0, 17- (1991)
  • 분말단조 공정의 3차원 유한요소해석, '91 추계학술발표대회, 대한금속학회, 고려대학교, 0, 0, - (1991)
  • 구리피복 철-니켈 합금봉 냉간 드로잉의 탄소성 유한요소해석, '90 추계학술발표대회, 대한금속학회, 인하대학교, 0, 0, - (1990)
  • 쾌삭황동의 연속주조 시 열전달과 응고조직, 제1회 응고기술 심포지엄 논문집, 대한금속학회, 서울대학교, 0, 0, 208- (1990)
  • 유한차분법을 이용한 연속주조 황동의 응고해석, '87 추계학술발표대회, 대한금속학회, 국민대학교, 0, 0, - (1987)

Invited Talk or Presentations

  • TWIP강 기반 3층 복층강판에서의 계면강화 효과 , 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • HPF강을 활용한 Hadfield-cored multi-layer의 인장특성 및 변형거동 , 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • 수치해석적 역추적 기법에 기반한 충격압분된 분말 복합재의 물성 평가, 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • 결정소성 유한요소해석을 통한 Al 합금에서 석출물이 리징 거동에 미치는 영향 분석, 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • 압축 비틀림 공정 하에서의 타이타늄 분말의 치밀화 거동 모델링, 제 31회 첨단구조재료 심포지엄, 0, 0, - (2017)
  • 봉상 구리의 등통로각압축공정을 통한 결정립 초미세립화에 대한 고찰, 2017년도 군사과학기술학회 추계학술대회, 0, 0, - (2017)
  • Method for measuring nanoscale local strain in heterogeneous structured materials using digital image correlation with nanodot patterns, 2nd International Hetero-Structure Materials Workshop, 0, 0, - (2017)
  • TWIP강 기반 복층강판의 성형성 , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • CoCrFeMnNi 고엔트로피 합금의 준정적 및 동적 압축 변형 거동 , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • 페라이트-오스테나이트 duplex 경량철강의 동적인장물성 및 변형 거동 , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • Strengthening by Brittle Sigma-phase in Ductile VCrFeNi High Entropy Alloy , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • TWinning Induced plasticity/Low-carbon(TWIP/LC) clad강의 동적 인장성질 , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • Microstructure Evolution and Critical stress for Twinning in the Newly Designed MnCoNiCu High-Enropy Alloy , 2017년도 대한금속 재료학회 추계 학술대회, 0, 0, - (2017)
  • TWIP강 기반 복층강판의 성형성, 2017년도 대한금속재료학회 추계학술대회, 0, 0, - (2017)
  • 고엔트로피 합금의 제조 및 소성 변형 거동 모델링, 2017년도 대한금속 재료학회 추계학술대회, 0, 0, - (2017)
  • CoCrFeMnNi 고엔트로피 합금의 준정적 및 동적 압축 변형 거동, 2017년도 대한금속 재료학회 추계학술대회, 0, 0, - (2017)
  • Manufacturing Multiple-Strengthened Nanocrystalline Steel via Elevated-Temperature Severe Plastic Deformation, The 10th Asian Workshop on Micro/Nano Forming Technology(AWMFT2017), 0, 0, - (2017)
  • Circumferential sample-rotation during route B equal-channel angular pressing, The 10th Asian Workshop on Micro/Nano Forming Technology(AWMFT2017), 0, 0, - (2017)
  • Key factors governing stretch-flangeability of sheet metals, Materials Science & Technology 2017 (MS&T17), 0, 0, - (2017)
  • Achieving Maximum Strength in Bulk Metallic Metals using Multiple Strengthening Mechanisms, The 7th International Conference on Nanomaterials by Severe Plastic Deformation(NANOSPD7), 0, 0, - (2017)
  • Neutron diffraction and finite element analysis of the residual stress distribution of copper processed by equal-channel angular pressing, The 7th International Conference on Nanomaterials by Severe Plastic Deformation(NANOSPD7), 0, 0, - (2017)
  • Superior pre-osteoblast cell response of etched ultrafine-grained titanium with a controlled crystallographic orientation, The 7th International Conference on Nanomaterials by Severe Plastic Deformation(NANOSPD7), 0, 0, - (2017)
  • Unusual effects of cryogenic high-pressure torsion of Co20Cr26Fe20Mn20Ni14 high-entropy alloy on microstructure and mechanical characteristics, The 7th International Conference on Nanomaterials by Severe Plastic Deformation(NANOSPD7), 0, 0, - (2017)
  • CoCrFeMnNi 고엔트로피합금의 이방성 및 디프드로잉 거동 연구, 2017년 소성가공학회 춘계학술대회, 0, 0, - (2017)
  • 중성자회절법과 유한요소법을 이용한 등통로각압축 공정된 구리 시편에서의 잔류응력 분석, 2017년도 소성가공학회 춘계학술대회, 0, 0, - (2017)
  • VCrMnFeCoNi 고엔트로피 합금의 상온 변형 쌍정을 이용한 극저온 기계적 강도 향상 , 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • Al합금 재결정 시 P {110} 방위의 형성에 관한 해석, 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • 냉연 TWIP Clad 강판의 인장성질 및 항복점 현상 해결 방안 연구 , 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • 3점 굽힘 시험을 통한 TWIP강의 인장-압축 변형 거동 관찰, 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • Microstructure and mechanical properties of high-entropy alloy Co20Cr26Fe20Mn20Ni14 processed by high-pressure torsion at 77 K and 300 K, 2017년도 대한금속재료학회 춘계 학술대회, 0, 0, - (2017)
  • 제어된 집합조직을 지니는 애칭된 초미세 결정립 타이타늄의 전조골세포 반응, 2017년도 대한금속재료학회 춘계 학술대회, 0, 0, - (2017)
  • 수치해석적 역추적 기법을 활용하여 추출한 충격압분체의 압축 거동, 2017년도 대한금속 재료학회 춘계 학술대회, 0, 0, - (2017)
  • 분말 입자의 크기와 형상이 충격파로 인한 반응성 활성화 정도에 미치는 영향, 2017년도 대한금속재료학회 춘계 학술대회, 0, 0, - (2017)
  • Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders, 2017년도 대한금속재료학회 춘계학술대회, 0, 0, - (2017)
  • 면심입방 고엔트로피 합금의 변형 거동 재현 및 예측을 위한 구성 모델링, 2017년도 대한금속재료학회 춘계학술대회, 0, 0, - (2017)
  • 나노인덴테이션과 유한요소법을 이용한 비틀림 변형 재료의 기계적 물성 취득, 2017년도 대한금속재료학회 춘계학술대회, 0, 0, - (2017)
  • 원통형 시편의 등통로각압축 공정, 2017년도 대한금속재료학회 춘계학술대회, 0, 0, - (2017)
  • CoCrFeMnNi 고엔트로피합금의 미세조직 변화에 따른 변형거동 및 성형성 연구, 2017년도 대한금속 재료학회 춘계학술대회, 0, 0, - (2017)
  • 하모닉 구조의 변형 거동과 우수한 기계적 물성, 2017년도 한국분말야금학회 춘계 학술대회, 0, 0, - (2017)
  • 기계적합금화와 방전플라즈마 소결법으로 제조된 CoCrFeMnNi 고엔트로피 합금의 구조와 특성, 2017년도 한국분말야금학회 춘계 학술대회, 0, 0, - (2017)
  • 수치해석적 역추적 기법을 활용하여 추출한 Ti/Al 충격압분체의 압축 거동에 대한 고찰, 2017년도 한국분말야금학회 춘계 학술대회, 0, 0, - (2017)
  • 수분사법을 이용하여 제조된 CoCrFeMnNi 고엔트로피 합금 분말의 압분 거동, 2017년도 한국분말야금학회 춘계 학술대회, 0, 0, - (2017)
  • Shock wave compaction and sintering of mechanically alloyed CoCrFeMnNi high-entropy alloy powders, 2017년도 한국분말야금학회 춘계학술대회, 0, 0, - (2017)
  • Hierarchical Core-Sheath Composites via Multi-Pass Caliber Rolling, ., 0, 0, - (2014)
  • Finite element and experimental analyses of dynamic strain aging of a supersaturated age hardenable aluminum alloy, ., 0, 0, - (2014)
  • Mechanical and microstructural investigation of nanotwinned TWIP steels processed by high-pressure torsion, ., 0, 0, - (2014)
  • FEM Simulations of Nanostructured Metals: Effects of Grain Size, Strain Rate, and Temperature, ., 0, 0, - (2014)
  • Effects of volume fraction and shape of CNT in CNT-reinforced iron composites, ., 0, 0, - (2014)
  • Numerical analysis of plastic deformation in combined simple shear extrusion and twist extrusion, ., 0, 0, - (2014)
  • Experimental and Mechanical Analyses of Hollow Cone High-Pressure Torsion, ., 0, 0, - (2014)
  • Consolidation and Deformation Mechanisms of Blended Powders by High Pressure Torsion Process to Produce Amorphous Metal Matrix Composites and its Mechanical Properties, ., 0, 0, - (2014)
  • Microstructure evolution in ultra-fine grained interstitial free steel processed by high pressure torsion, ., 0, 0, - (2014)
  • Hydrostatic Stress in High pressure Torsion of Metallic Materials, ., 0, 0, - (2014)
  • Microstructural Evolution during Multi-Pass Caliber- Rolling Process of Titanium Alloy, ., 0, 0, - (2014)
  • FEM Simulations for Effects of Grain Size, Strain Rate and Temperature on Properties of Nanostructured Metals, ., 0, 0, - (2014)
  • An electron back-scattered diffraction study on the microstructure evolution of the severely deformed aluminum Al6061 alloy, ., 0, 0, - (2014)
  • Microstructure and defect structure evolution in AZ31 alloy processed by high pressure torsion, ., 0, 0, - (2014)
  • Cryogenic deformation of copper under shock wave, ., 0, 0, - (2014)
  • Microstructure and mechanical properties of fullerene/Ti composite processed by high-pressure torsion, ., 0, 0, - (2014)
  • Enhanced Tensile Ductility of a Zr65Al7.5Ni10Cu12.5Pd5 Bulk Metallic Glass by High Pressure Torsion and Its Mechanisms of Work Hardenability:, ., 0, 0, - (2014)
  • Texture of Hot-Rolled Copper after Twist Extrusion, ., 0, 0, - (2014)
  • Hollow Cone High Pressure Torsion, ., 0, 0, - (2014)
  • Finite element analysis of forging behavior of titanium combined with a semi-phenomenological constitutive model for hcp materials, ., 0, 0, - (2014)
  • SPD Tube, ., 0, 0, - (2013)
  • SPD of Ti, ., 0, 0, - (2013)
  • Finite element analysis based on the phase mixture model for tensile deformation behavior of nanocrystalline metallic materials, ., 0, 0, - (2013)
  • Predicting the Mechanical Properties of Linepipe Steels by the Finite Element Method, ., 0, 0, - (2013)
  • Dislocation and twin, ., 0, 0, - (2013)
  • Two phase constitutive model predicting the strength and strain rate sensitivity for large deformation of Ti, ., 0, 0, - (2013)
  • Finite Element Analysis of Copper Bar in Gas Gun Impact, ., 0, 0, - (2013)
  • Fracture Simulations Using the Finite Element Method Combined with Microstructure-Based Constitutive Model and Forming Limit Diagram in Mechanical Clinching of AZ31 Sheets, ., 0, 0, - (2013)
  • Effects of the Various Processing Conditions on UOE Linepipe, ., 0, 0, - (2013)
  • Numerical and Experimental Analysis of Torsion-Based Severe Plastic Deformation for Layered Composites, ., 0, 0, - (2013)
  • Thermal Stress Analysis of Ni, NiCrAlY-YSZ Functionally Graded Materials at High Temperature, ., 0, 0, - (2013)
  • Finite Element Analysis of Processing-Microstructure-Properties in Caliber Rolling of Copper, ., 0, 0, - (2013)
  • New constitutive model for HCP materials and its application to FEM simulation, ., 0, 0, - (2013)
  • Corrosion resistivity of ultrafine grained pure Ti and Ti-6Al 4V alloy processed by high-pressure torsion, ., 0, 0, - (2013)
  • Tomography-based finite element analysis for the mechanical behavior of porous Ti, ., 0, 0, - (2013)
  • Severe plastic deformation of Ti for biomedical application: finite element analysis based on dislocation glide and twinning mechanisms., ., 0, 0, - (2013)
  • Enhanced mechanical properties of Zr-based bulk metallic glasses processed by high pressure torsion, ., 0, 0, - (2012)
  • Mechanical Properties of Bulk Metallic Glasses Processed by Cyclic High Pressure Torsion, ., 0, 0, - (2012)
  • 재료모델과 파괴모델을 결합한 유한 요소해석을 통한, Mg합금 판재 기계적 접합공정 최적화, ., 0, 0, - (2012)
  • Obtaining Mechanical Properties of Fe Powder Using A Combined Nanoindentation and the Finite Element Method, ., 0, 0, - (2012)
  • 다공질 타이타늄의 기계적 성질에 대한 Computed-tomography를 이용한 유한요소해석, ., 0, 0, - (2012)
  • Tribology properties of Zr-based bulk metallic glasses processed by high pressure torsion, ., 0, 0, - (2012)
  • 유한요소법을 활용한 X70, X80강 Spiral Welded 라인파이프 조관공정 전후의 물성변화 예측, ., 0, 0, - (2012)
  • 전위 셀 모델이 적용된 유한요소해석을 통한 고압비틀림 공정의 해선과 구리의 미세조직 변화 측정, ., 0, 0, - (2012)
  • Microstructure and Mechanical Behavior in Compression of Cu-Al 6061 Composites Fabricated by Repeated Extrusion, ., 0, 0, - (2012)
  • Ni기 FGM-YSZ 경사기능재료의 경사도 및 기공을 고려한 열 및 응력의 유한요소해석, ., 0, 0, - (2012)
  • A cell model for HCP materilas and high strain deformation with application by HPT process, ., 0, 0, - (2012)
  • 고압비틀림 공정으로 제조된 구리의 결정립 미세화 및 동적 재결정 분석, ., 0, 0, - (2012)
  • 유한요소 해석을 통한 Mg 판재 Clinching 접합공정 최적화, ., 0, 0, - (2012)
  • 강소성 공정으로 결정립 미세화된 CP-Ti의 기계적 성질 및 동맥류 클립의 유한요소해석, ., 0, 0, - (2012)
  • Finite element analysis and mechanical properties of ultrafine grained pure Ti aneurysm clip processed by severe plastic deformation, ., 0, 0, - (2012)
  • Analysis for Plastic Deformation Behavior during High-Pressure Torsion Process by Finite Element Method and Experiments, ., 0, 0, - (2012)
  • Processing and mechanical properties of nanostructured copper produced by twist extrusion, ., 0, 0, - (2012)
  • Closed Cone Torsion에 의한 구리 벌크나노 cone의 미세조직과 기계적 특성, ., 0, 0, - (2012)
  • AZ31 판재의 기계적 클린칭 접합공정 시 파괴거동 해석, ., 0, 0, - (2012)
  • 고압비틀림을 이용한 벌크나노재료 Cone의 제조, ., 0, 0, - (2012)
  • A semi-phenomenological constituvie model for hcp materials as exemplified by alpha titanium, ., 0, 0, - (2012)
  • 기계적 클린칭 공정을 이용한 Mg 판재 접합공정의 유한요소해석, ., 0, 0, - (2012)
  • 분말 표면 조도의 3차원 레이저 분석기를 이용한 정량화와 압분성형체 강도에 미치는 영향 분석, ., 0, 0, - (2012)
  • 고압비틀림 공정을 이용하여 치밀화한 벌크구리의 기계적 성질에 미치는 나노산화물 입자의 영향, ., 0, 0, - (2012)
  • 고압비틀림을 이용한 순철 분말의 치밀화 및 기계적 거동, ., 0, 0, - (2012)
  • Nanoindentation Analysis for Local Properties of Ultrafine Grained Copper Processed by High Pressure Torsion, ., 0, 0, - (2012)
  • Wear resistance of nanocrystallined Cu-diamond composites processed by high pressure torsion, ., 0, 0, - (2012)
  • Measuring local stress-strain behavior using nanoindentation, ., 0, 0, - (2011)
  • Digital image correction for shear banding in bulk metallic glasses, ., 0, 0, - (2011)
  • Residual Stress Measured by the Neutron Diffraction Method in Equal Channel Angular Pressing Processed, ., 0, 0, - (2011)
  • Consolidation and Nanocrystallization of atomized copper powders using high pressure torsion, ., 0, 0, - (2011)
  • The structural and mechanical properties of Zr55Cu30Al10Ni5 bulk metallic glass processed by highpressure, ., 0, 0, - (2011)
  • Measurement of Residual Stresses in Equal Channel Angular Processing (ECAP) by Neutron Diffraction, ., 0, 0, - (2011)
  • Densification and nanocrystallization of Cu powder in cold consolidation using high pressure torsion, ., 0, 0, - (2011)
  • Evolution of Microstructure in an Al-6061 Alloy by High Pressure Torsion Process, ., 0, 0, - (2011)
  • Development of Constitutive Model for HCP Materials Based on CP-Titanium and Analysis Through Finite Element Method, ., 0, 0, - (2011)
  • Estimation of stress-strain curves of cortical and trabecular bones of rats using nanoindentation curves, ., 0, 0, - (2011)
  • 고압비틀림공정을 이용한 나선형 멀티 합금소재 제작, ., 0, 0, - (2011)
  • 고압비틀림공정으로 제조된 구리-탄소나노튜브 복합재의 미세조직과 기계적 특성, ., 0, 0, - (2011)
  • 유한요소법을 이용한 다심선 압출공정 연구, ., 0, 0, - (2011)
  • 수분사로 제조된 순철분의 성형성에 미치는 분말크기의 영향과철분의 치밀화 거동에 미치는 분말입도 효과에 대한 실험 및 다공질재료 모델을 이용한 유한요소해석, ., 0, 0, - (2011)
  • Analysis of local deformation of copper during high pressure torsion, ., 0, 0, - (2011)
  • Severe Plastic Deformation of Carbon Nanotube Reinforced Metal Matrix Composites, ., 0, 0, - (2010)
  • ECAP of CNT Reinforced Metal Matrix Composites: Processing and Properties, ., 0, 0, - (2010)
  • Analysis of Strain Rate Sensitivity of Nanostructured Materials, ., 0, 0, - (2010)
  • Nanocrystallization of Cu-diamond composites using high pressure torsion, ., 0, 0, - (2010)
  • Modeling of deformation behavior of CP Ti under equal angular pressing, ., 0, 0, - (2010)
  • Severe plastic deformation in the compressive stage of copper in High Pressure Torsion, ., 0, 0, - (2010)
  • Free volume mechanism based finite element analysis of bulk metallic glasses, ., 0, 0, - (2010)
  • Fracture Simulation in Equal Channel Pressing of Magnesium Powders, ., 0, 0, - (2010)
  • SPD & Processing Design of Groove Pressing for Homogeneous Ultrafine Grained Sheets, ., 0, 0, - (2010)
  • Microstructural Evolution and Fracture Simulations of Equal Channel Angular, ., 0, 0, - (2010)
  • Dislocation and twin mechanisms-based deformation simulation, ., 0, 0, - (2010)
  • Microstructure and tensile behavior of Al and Al-matrix carbon nanotube composites processed by high pressure torsion of the powders, ., 0, 0, - (2010)
  • Fracture Simulation during ECAP, ., 0, 0, - (2010)
  • Analyses of Route Bc Equal Channel Angular Pressing and Post-Equal Channel Angular Pressing Behavior by the Finite Element Method, ., 0, 0, - (2010)
  • Consolidation of gas atomized MgZn4.3Y0.7 alloy powders using high pressure torsion, ., 0, 0, - (2010)
  • Finite element analysis based on the phase mixture model for tensile deformation behavior of nanocrystalline metallic materials, ., 0, 0, - (2009)
  • Plastic Forming Analyses of Modified Equal Channel Angular Pressing, ., 0, 0, - (2009)
  • Constitutive model and finite element analysis of amorphous and nanocrystalline metallic materials, ., 0, 0, - (2009)
  • Comparison of Modified Equal Channel Angular Pressing, INTERNATIONAL SYMPOSIUM ON GIANT STRAINING PROCESS FOR ADVANCED MATERIALS, 0, 0, - (2008)
  • Mechanical Modeling of BMG Composites: from Porous to CNT Reinforced, ., 0, 0, - (2008)
  • Multi-Scale Simulation of the Plastic Deformation of Nanocrystalline Metallic Materials, ., 0, 0, - (2008)

Books

  • Bulk Nanostructured Materials, Wiley-VCH, , 김형섭(공동) (2009)

Research Activities

  • FORMING PROCESS SIMULATION OF ENGINEERING PARTS FROM RAPIDLY SOLIDIFIED MG AND MG ALLOYS, 한국생산기술연구원 (2008-2009)
  • SYNTHESIS AND MODELING OF NANOSTRUCTURED METALLIC MATERIALS USING SEVERE PLASTIC DEFORMATION, 포항공과대학교 (2008-2009)
  • [STSC](전사)FINITE ELEMENT METHOD와 X-RAY MICRO-RADIOGRAPHY를 결합한 MG합금의 연성파괴연구, (주)포스코 (2009-2009)
  • (전사) 미세조직에 따른 기계적성질의 예측모델 개발, (주)포스코 (2009-2009)
  • INVESTIGATION ON THE DUCTILE FRACTURE OF MG ALLOYS BY THE COUPLED FINITE ELEMENT METHOD AND X-RAY MICRO-RADIOGRAPHY, 포항공과대학교 산학협력단 (2009-2009)
  • DEVELOPMENT OF PREDICTING MODEL ON THE MECHANICAL PROPERTIES WITH MICROSTRUCTURE, 포항공과대학교 산학협력단 (2009-2009)
  • (포항) 연주 공극 압연중 압착거동, (주)포스코 (2009-2009)
  • DENSIFICATION BEHAVIOR OF PORES DURING ROLLING IN CONTINUOUS CAST BILLETS, 포항공과대학교 산학협력단 (2009-2009)
  • [STSC]SERIAL SECTIONING 법과 유한요소법을 결합한 재료 미세조직의 3차원 분석과 기계적성질 모사, (주)포스코 (2009-2010)
  • FORMING PROCESS SIMULATION OF ENGINEERING PARTS FROM RAPIDLY SOLIDIFIED MG AND MG ALLOYS, 한국생산기술연구원 (2009-2010)
  • 인건비풀링과제, 포항공과대학교 (2009-2015)
  • 자체연구개발과제, 포항공과대학교 (2009-2016)
  • DEVELOPMENT OF CMP CONDITIONER MANUFACTURING TECHNOLOGY WITH ULTRA-FINE DIAMOND/BULK METALLIC GLASS COMPOSITE, 신한다이아몬드공업(주) (2009-2010)
  • 제4회 나노 및 비정질 재료에 관한 국제 심포지엄, 포항공과대학교 (2009-2010)
  • (전사) FE계 분말의 특성 및 성형 평가 기술 개발 (1 / 1), (주)포스코 (2010-2010)
  • FE계 분말의 특성 및 성형 평가 기술, 포항공대산학협력단 (2010-2010)
  • 벌크비정질 나노복합재의 변형과 전단띠거동에 관한 이론적 해석, (재)포항산업과학연구원 (2010-2010)
  • 서셉터용 베이스 구조의 설계 및 해석 기술, 한국기계연구원부설재료연구소 (2010-2011)
  • THEORETICAL AND EXPERIMENTAL ANALYSES OF DEFORMATION AND SHEAR BANDING BEHAVIOR IN BULK AMORPHOUS NANOCOMPOSITES, 재단법인한국연구재단 (2010-2011)
  • HYBRID ALLOY DESIGN AND MULTI-FUNCTION STABILIZATION TECHNOLOGY, 충남대학교산학협력단 (2010-2011)
  • 급속응고 MG 및 MG합금 분말의 부품성형 공정 SIMULATION, 한국생산기술연구원 (2010-2011)
  • METAL MATRIX COMPOSITES BY SOLID-STATE DEFORMATION PROCESS, 한국생산기술연구원 (2010-2011)
  • EXPERIMENTAL/THEORETICAL INVESTIGATIONS ON STATIC/DYNAMIC DEFORMATIONS OF METALLIC GLASS-MATRIX FIBER REINFORCED COMPOSITES, 재단법인한국연구재단 (2010-2011)
  • (학생)인건비풀링과제, 포항공대산학협력단 (2010-2020)
  • [STSC]포항 가속기 EUVL GRIDDING-IN SITU 변형-VISION STRAIN의 통합 해석 기법 개발, (주)포스코 (2010-2011)
  • DEVELOPMENT OF CMP CONDITIONER MANUFACTURING TECHNOLOGY WITH ULTRA-FINE DIAMOND/BULK METALLIC GLASS COMPOSITE, 신한다이아몬드공업(주) (2010-2011)
  • FE계 분말의 특성 및 성형 평가 기술 개발, (주)포스코 (2011-2011)
  • FE계 분말의 특성 및 성형 평가 기술 개발, 포항공대산학협력단 (2011-2011)
  • 자동차용 AHSS의 수소취성 파괴기구 해석, 포항공대산학협력단 (2011-2011)
  • [GREENSCIENCE]벌크비정질 나노복합재의 변형과 전단띠거동에 관한 이론적 해석(2), (재)포항산업과학연구원 (2011-2011)
  • 서셉터용 베이스 구조의 설계 및 해석 기술, 한국기계연구원부설재료연구소 (2011-2012)
  • PROCESSING AND PROPERTIES OF BULK NANOSTRUCTURED MATERIALS BY SEVERE PLASTIC DEFORMATION OF TWIST EXTRUSION, 재단법인한국연구재단 (2011-2012)
  • THEORETICAL AND EXPERIMENTAL ANALYSES OF DEFORMATION AND SHEAR BANDING BEHAVIOR IN BULK AMORPHOUS NANOCOMPOSITES, 재단법인한국연구재단 (2011-2012)
  • 고상변형제어 복합소재 제조기술, 한국생산기술연구원 (2011-2012)
  • EXPERIMENTAL/THEORETICAL INVESTIGATIONS ON STATIC/DYNAMIC DEFORMATIONS OF METALLIC GLASS-MATRIX FIBER REINFORCED COMPOSITES, 재단법인한국연구재단 (2011-2012)
  • HYBRID ALLOY DESIGN AND MULTI-FUNCTION STABILIZATION TECHNOLOGY, 충남대학교산학협력단 (2011-2012)
  • A STUDY ON HIGH-PRESSURE MATERIAL PROPERTY CHARACTERISTICS OF NANO-SIZED POWDER MATERIALS UNDER EXPLOSION/IMPACT LOADING, 국방과학연구소 (2011-2013)
  • COMPUTER SIMULATION OF FUNCTIONALLY GRADED COATING SYSTEMS WITH A LOW THERMAL CONDUCTIVITY, 한전케이피에스(주)GT정비기술센터 (2011-2013)
  • (전사) FE계 분말의 특성 및 성형 평가기술 개발 (1/1), (주)포스코 (2012-2012)
  • 기계적 접합 공법 설계를 위한 MG 판재의 고온 대변형 해석, (주)포스코 (2012-2012)
  • 생체모방형 TI-계 하이브리드 소재 개발, 포항공대산학협력단 (2011-2012)
  • DEVELOPMENT OF EVALUATION TECHNOLOGIES FOR CHARACTERISTICS AND FORMING OF FE POWDERS, 포항공대산학협력단 (2012-2012)
  • HIGH TEMPERATURE LARGE DEFORMATION ANALYSIS OF MG SHEETS FOR DESIGNING MECHANICAL JOINING PROCESSES, 포항공대산학협력단 (2012-2012)
  • PROCESSING AND PROPERTIES OF BULK NANOSTRUCTURED MATERIALS BY SEVERE PLASTIC DEFORMATION OF TWIST EXTRUSION, 재단법인한국연구재단 (2012-2013)
  • 서셉터용 베이스 구조의 설계 및 해석 기술, 한국기계연구원부설재료연구소 (2012-2013)
  • 고상변형제어 복합소재 제조기술, 한국생산기술연구원 (2012-2013)
  • EXPERIMENTAL/THEORETICAL INVESTIGATIONS ON STATIC/DYNAMIC DEFORMATIONS OF METALLIC GLASS-MATRIX FIBER REINFORCED COMPOSITES, 재단법인한국연구재단 (2012-2013)
  • HYBRID ALLOY DESIGN AND MULTI-FUNCTION STABILIZATION TECHNOLOGY, 충남대학교산학협력단 (2012-2013)
  • 학부생프로그램-강지윤,정재면(신소재)-극저 탄성계수를 갖는 생체 적합성 초미세결정립 TI 다층 복합재료 개발, 포항공과대학교 (2012-2013)
  • DEVELOPMENT OF BIO-MIMETIC TI HYBRID MATERIALS, 포항공대산학협력단 (2013-2013)
  • 프레스 가공 중 전단변형(SHEAR DEFORMATION)을 이용한 마그네슘의 기계적 접합, (주)포스코 (2013-2013)
  • 서셉터용 베이스 구조의 설계 및 해석 기술 개발, 한국기계연구원부설재료연구소 (2013-2014)
  • 나노압입시험으로부터 재료의 국부 응력-변형률 거동 추출, 한국기계연구원부설재료연구소 (2013-2013)
  • 기초과학연구소 학술교류지원사업, 포항공과대학교 (2013-2014)
  • MG ALLOY SHEET MECHANICAL JOINING DEVELOPMENT USING SHEAR DEFORMATION IN PRESS DEFORM, 포항공대산학협력단 (2013-2013)
  • PROCESSING AND PROPERTIES OF BULK NANOSTRUCTURED MATERIALS BY SEVERE PLASTIC DEFORMATION OF TWIST EXTRUSION, 재단법인한국연구재단 (2013-2014)
  • METAL MATRIX COMPOSITES BY SOLID-STATE DEFORMATION PROCESS, 한국생산기술연구원 (2013-2014)
  • HYBRID ALLOY DESIGN AND MULTI-FUNCTION STABILIZATION TECHNOLOGY, 충남대학교산학협력단 (2013-2014)
  • 한중 신진과학자교류사업, 재단법인한국연구재단 (2013-2014)
  • [학연협동]고밀도 부품화를 위한 CORE-SHELL STRUCTURE FE계 합금분말기술 개발, (재)포항산업과학연구원 (2013-2014)
  • FE분말 신부품 적용 기술 개발, (주)포스코 (2014-2014)
  • CEM 제품 고급화를 위한 연주 직결 조압연에서의 BAR에지크랙과 COIL에서의 항복점연신 원인 규명, (주)포스코 (2014-2014)
  • 생체모방형 TI-계 하이브리드 소재 개발, 포항공대산학협력단 (2014-2014)
  • FE분말 신부품 적용기술 개발, 포항공대산학협력단 (2014-2014)
  • PANEL용 TWIP강 복합재료의 성형해석 및 가공성 평가, 포항공대산학협력단 (2014-2015)
  • CEM 제품 고급화를 위한 연주 직결 조압연에서의 BAR에지크랙과 COIL에서의 항복점연신 원인 규명, 포항공대산학협력단 (2014-2014)
  • PANEL용 TWIP강 복합재료의 성형해석 및 가공성 평가, (주)포스코 (2014-2015)
  • 나노압입시험으로부터 재료의 국부 응력-변형률 거동 추출, 한국기계연구원부설재료연구소 (2014-2014)
  • A STUDY ON HIGH-PRESSURE MATERIAL PROPERTY CHARACTERISTICS OF NANO-SIZED POWDER MATERIALS UNDER EXPLOSION/IMPACT LOADING, 국방과학연구소 (2014-2016)
  • (김형섭)BSRI_기초과학연구소 학술교류지원, 포항공과대학교 (2014-2015)
  • DESIGN AND MANUFACTURING OF MULTI-SCALE ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2014-2015)
  • CEM 극박재 제품 가공성 특성 연구 및 톱귀결함 예측 모델 개발, (주)포스코 (2015-2015)
  • 멀티 강화기구 기반 초고강도 벌크 나노철강소재 개발, 재단법인한국연구재단 (2015-2016)
  • CEM 극박재 제품 가공성 특성 연구 및 톱귀결함 예측 모델 개발, 포항공대산학협력단 (2015-2015)
  • 미세조직을 고려한 조관 후 기계적 물성 예측 모델 개발, 포항공대산학협력단 (2015-2015)
  • 고MN강을 이용한 복층강판의 성형 및 파괴특성 연구, 포항공대산학협력단 (2015-2016)
  • HPF강 대체를 위한 1.5G급 냉연강판 제조 연구, 포항공대산학협력단 (2015-2016)
  • 자체연구개발과제[2015년 신설], 포항공과대학교 (2015-2029)
  • [S/S2차]3차원 가상 미세조직과 전산모사를 결합한 철강소재 최적 미세조직 설계기법 개발, (주)포스코 (2015-2016)
  • DESIGN AND MANUFACTURING OF MULTI-SCALE ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2015-2016)
  • 고압비틀림법에 의한 초미세립 소재 제조 공정 용역, 국방과학연구소 (2015-2017)
  • CREATION OF MULTI-FUNCTIONAL HIGH ENTROPY ALLOYS FOR EXTREME ENVIRONMENTS, 재단법인한국연구재단 (2015-2016)
  • SURFACE MODIFICATION OF NANOSTRUCTURED TI FOR BIOMEDICAL IMPLANTS VIA SEVERE PLASTIC DEFORMATION, 재단법인한국연구재단 (2016-2016)
  • 후판 열간교정기 각마모 발생 MECHANISM 규명 (1/1), (주)포스코 (2016-2016)
  • [기술개발비]후판 열간교정기 각마모 발생 MECHANISM 규명 (1/1, 포항공대산학협력단 (2016-2016)
  • 멀티 강화기구 기반 초고강도 벌크 나노철강소재 개발, 재단법인한국연구재단 (2016-2017)
  • [기술개발과제]HPF강 대체를 위한 1.5G급 냉연강판 제조 연구, 포항공대산학협력단 (2016-2017)
  • Commercialization of ECAP for Cu Liner and Material Characterization, 국방과학연구소 (2016-2018)
  • CREATION OF MULTI-FUNCTIONAL HIGH ENTROPY ALLOYS FOR EXTREME ENVIRONMENTS BASED ON MULTI-PHYSICS FULL-SCALE INTEGRATED MODELING, 재단법인한국연구재단 (2016-2017)
  • 결정소성 모델 기반 재결정 집합조직 모델링 연구, (주)포스코 (2016-2017)
  • 결정소성 모델 기반 재결정 집합조직 모델링 연구, (주)포스코 (2016-2017)
  • DESIGN AND MANUFACTURING OF MULTI-SCALE ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2016-2017)
  • DESIGNING TA PROCESSING ROUTE FOR TEXTURE OPTIMIZATION, (주)풍산 기술연구원 (2016-2019)
  • COMMERCIALIZATION OF ECAP FOR CU LINER AND MATERIAL CHARACTERIZATION, 국방과학연구소 (2016-2017)
  • SURFACE MODIFICATION OF NANOSTRUCTURED TI, 재단법인한국연구재단 (2017-2017)
  • 대학 창의적 자산 실용화 지원사업, 재단법인한국연구재단 (2017-2018)
  • CREATION OF MULTI-FUNCTIONAL HIGH ENTROPY ALLOYS FOR EXTREME ENVIRONMENTS BASED ON MULTI-PHYSICS FULL-SCALE INTEGRATED MODELING, 재단법인한국연구재단 (2017-2018)
  • 고엔트로피합금연구단 부서연구관리비, 포항공대산학협력단 (2017-2020)
  • DEFORMATION MECHANISM AND MICROSTRUCTURAL ANALYSIS OF HIGH-ENTROPY ALLOY FOR EXTREME CONDITIONS, 재단법인한국연구재단 (2017-2017)
  • 4.13581.01 이월과제, 재단법인한국연구재단 (2017-2018)
  • 생체흡수성 금속 응용 연구, 포항공과대학교 (2017-2018)
  • 제10회 아시아 나노-마이크로 성형 기술 워크샵, 포항공과대학교 (2017-2018)
  • 고엔트로피 합금의 제조 및 소성 변형 거동에 대한 모델링(장민지), (재)한국여성과학기술인지원센터 (2017-2017)
  • 고강도 SPRING WIRE 제품의 절손 원인규명, 고려제강(주) (2017-2018)
  • 4.13223_이월과제, 재단법인한국연구재단 (2017-2018)
  • 미세조직 기반 전산모사를 통한 기계적 특성 예측 방법 개발, (주)포스코 (2017-2018)
  • [기술개발비]미세조직 기반 전산모사를 통한 기계적 특성 예측 방법 개발, 포항공대산학협력단 (2017-2018)
  • 4.13010_이월과제, 재단법인한국연구재단 (2017-2017)
  • DESIGN AND MANUFACTURING OF LIGHTWEIGHT HETEROGENEOUS ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2017-2018)
  • 하이엔트로피 신합금 개발, 엘지전자(주) (2017-2018)
  • COMMERCIALIZATION OF ECAP FOR CU LINER AND MATERIAL CHARACTERIZATION, (주)풍산 기술연구원 (2017-2019)
  • EXPLORATION OF PREDICTIVE ALLOY DESIGN FRAMEWORK FOR HIGH ENTROPY ALLOYS, ExxonMobil Research & Engineering (2017-2018)
  • 굽힘 가공중 표면 미세 크랙 발생 기구 분석, (주)포스코 (2018-2018)
  • DEFORMATION MECHANISM AND MICROSTRUCTURAL ANALYSIS OF HIGH-ENTROPY ALLOY FOR EXTREME CONDITIONS, 재단법인한국연구재단 (2018-2018)
  • [기술개발비]굽힘 가공중 표면 미세 크랙 발생 기구 분석, 포항공대산학협력단 (2018-2018)
  • CREATION OF MULTI-FUNCTIONAL HIGH ENTROPY ALLOYS FOR EXTREME ENVIRONMENTS BASED ON MULTI-PHYSICS FULL-SCALE INTEGRATED MODELING, 재단법인한국연구재단 (2018-2019)
  • DESIGN AND MANUFACTURING OF LIGHTWEIGHT HETEROGENEOUS ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2018-2019)
  • 금속3D 프린팅용 고엔트로피합금 분말 개발, 한국기계연구원부설재료연구소 (2018-2018)
  • 대학 창의적 자산 실용화 지원(BRIDGE+)사업, 재단법인한국연구재단 (2018-2018)
  • 4.14471 이월과제, 재단법인한국연구재단 (2018-2019)
  • 고엔트로피합금의 미세조직 기반 소성변형 모델링, (재)한국여성과학기술인지원센터 (2018-2018)
  • 고탄소강 주편의 판파단 예측을 위한 가열로 열변형 모델 개발, (주)포스코 (2018-2019)
  • [4.16634_기술개발] 고탄소강 주편의 판파단 예측을 위한 가열로 열변형 모델 개발, 포항공대산학협력단 (2018-2019)
  • 대학 창의적 자산 실용화 지원(BRIDGE+)사업, 재단법인한국연구재단 (2018-2019)
  • 차세대 선도 기술개발을 위한 기초연구 ('18년 상반기_5차), (주)포스코 (2018-2019)
  • (융복합) 강소성 나노구배 마그네슘 합금 및 PLGA 고분자를 이용한 생체적합성 임플란트 연구, (주)포스코 (2018-2019)
  • 플라즈마 고온환원법을 이용하는 머신러닝기반 합금분말 설계 및 제조 플랫폼 개발, 한국산업기술평가관리원 (2018-2018)
  • 2018년도 청년TLO 육성사업, (재)연구성과실용화진흥원 (2018-2019)
  • 미세조직 기반 전산모사를 통한 기계적 특성 예측 방법 개발, (주)포스코 (2018-2019)
  • [4.17037_기술개발비]미세조직 기반 전산몬사를 통한 기계적 특성 예측 방법 개발, 포항공대산학협력단 (2018-2019)
  • 하이엔트로피 합금 개발, 엘지전자(주) (2018-2019)
  • DEFORMATION MECHANISMS OF NANOSTRUCTURED HIGH ENTROPY ALLOYS WITH SIMULTANEOUSLY IMPROVED STRENGTH-PLASTICITY IN WIDE TEMPERATURE RANGE 300–0.5 K, 재단법인한국연구재단 (2018-2019)
  • DEFORMATION MECHANISM AND MICROSTRUCTURAL ANALYSIS OF HIGH-ENTROPY ALLOY FOR EXTREME CONDITIONS, 재단법인한국연구재단 (2019-2019)
  • 플라즈마 고온환원법을 이용하는 머신러닝기반 합금분말 설계 및 제조 플랫폼 개발, 한국산업기술평가관리원 (2019-2019)
  • DESIGN AND MANUFACTURING OF LIGHTWEIGHT HETEROGENEOUS ARCHITECTURED METALLIC MATERIALS, 재단법인한국연구재단 (2019-2020)
  • 4.16690_이월과제, 재단법인한국연구재단 (2019-2020)
  • CREATION OF MULTI-FUNCTIONAL HIGH ENTROPY ALLOYS FOR EXTREME ENVIRONMENTS BASED ON MULTI-PHYSICS FULL-SCALE INTEGRATED MODELING, 재단법인한국연구재단 (2019-2019)
  • 금속3D 프린팅용 고엔트로피합금 분말 개발, 한국기계연구원부설재료연구소 (2019-2019)
  • 대학창의적자산실용화지원(BRIDGE+)사업_2차년도, 재단법인한국연구재단 (2019-2020)
  • ., (재)연구성과실용화진흥원 (2019-2020)

IP

  • 김형섭,신현권,강남석,오진목,도현석,문종언,박정민,이병주, 스피노달 분해를 이용한 경량 중엔트로피 합금, 한국, 10-2019-0029526 (2019)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, 일본, 2018-566550 (2018)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, USA, 16/310,855 (2018)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, EP, 17913104.0 (2018)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, EP, 17912348.4 (2018)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, 일본, 2018-565038 (2018)
  • 이병주,최원미,이성학,김형섭,조용희,손석수, 전산모사 기법을 활용한 고엔트로피 합금의 설계방법, 한국, 10-2018-0159626 (2018)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, USA, 16/308,517 (2018)
  • 김형섭,황교준,이학현, 금속판재 가공장치 및 가공방법, 한국, 10-2018-0142098 (2018)
  • 이성학,이병주,김형섭,조용희,이석규,김동근,송혜진,양준하, 고엔트로피 합금을 이용한 클래드 및 그 제조방법, 한국, 10-2019-0030076 (2018)
  • 김형섭,배재웅,박정민,김정기, 고강도 고인성 중엔트로피 합금 및 그 제조방법, 한국, 10-2018-0127632 (2018)
  • 김형섭,백승미,아마노프 아웨즈한,문지현,우마로프 라크마트전, 마그네슘 합금의 처리방법 및 강소성 가공된 마그네슘 합금재, 한국, 10-2018-0136748 (2018)
  • 이성학,이병주,김형섭,이동화,조용희,김동근,양준하, 고엔트로피 합금 및 그 제조방법, 한국, 10-2018-0153664 (2018)
  • 이성학,김동근,이병주,김형섭,조용희,최원미,양준하, 이상을 갖는 변태유기소성 고엔트로피 합금 및 그 제조방법, 한국, 10-2018-0121952 (2018)
  • 김형섭,배재웅,문종언,장민지,박정민, 중엔트로피 합금 및 그 제조방법, 한국, 10-2018-0122672 (2018)
  • 이성학,이병주,김형섭,조용희,김동근,양준하,최원미, 고엔트로피 합금 및 그 제조방법, 한국, 10-2018-0121953 (2018)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, 극저온용 고 엔트로피 합금, USA, 16/084,581 (2018)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, Cr-Fe-Mn-Ni-V계 고 엔트로피 합금, USA, 16/084,610 (2018)
  • 김형섭,신현권,강남석,오진목,이병주,문종언,박정민,도현석, 스피노달 분해를 이용한 경량 중엔트로피 합금, 한국, 10-2018-0080763 (2018)
  • 이성학,조용희,김동근,최원미,손석수,김형섭,이병주, V-CR-FE-NI계 고강도 고엔트로피 합금, -, PCT/KR2018/0082 (2018)
  • 김형섭,김우열,서승재,이재근,이학현, 돌출부를 포함한 등통로각 압축공정 장치, 한국, 10-2019-0019361 (2018)
  • 김형섭,윤재익,이학현,정재면, 축소 크기의 시편으로 시편 크기 효과가 없는 신장플랜지성을 측정하는 방법, USA, 15/977,030 (2018)
  • 김형섭,문종언,이병주,배재웅,최원미,장민지, AI 첨가 고엔트로피 합금의 가공성 향상 방법, -, PCT/KR2018/0036 (2018)
  • 이성학,이병주,손석수,김형섭,김동근,조용희,최원미, 변태유기소성 고엔트로피 합금 및 이의 제조방법, -, PCT/KR2018/0037 (2018)
  • 이성학,이병주,김형섭,손석수,조용희,최원미,김동근, 고엔트로피 합금 및 그 제조방법, 한국, 10-2018-0027915 (2018)
  • 문지현,엄호용,윤재익,백승미,김형섭, 표면연마를 적용시켜 기계적 성질이 향상된 금속 봉재의 비틀림 강소성 가공법, -, PCT/KR2018/0015 (2018)
  • 이성학,이병주,손석수,김형섭,김동근,조용희,최원미, 변태유기소성 고엔트로피 합금 및 이의 제조방법, 한국, 10-2018-0006851 (2018)
  • 이병주,임다미,TAPIA SECO FERREIRAANTONIO JOAO,김형섭, 고엔트로피 합금 및 그 제조방법, 한국, 10-2018-0005072 (2017)
  • 이성학,이병주,손석수,김형섭,김동근,조용희,최원미, 변태유기소성 고엔트로피 합금 및 이의 제조방법, 한국, 10-2017-0139052 (2017)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, -, PCT/KR2017/0125 (2017)
  • 김형섭,백승미,한세광,신명환, 금속 생체재료 및 그 제조방법, 한국, 10-2017-0122846 (2017)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, -, PCT/KR2017/0093 (2017)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, 한국, 10-2017-0115407 (2017)
  • 김형섭,배재웅,설재복,한종찬, 보론이 도핑된 고엔트로피 합금 및 그 제조방법, 한국, 10-2017-0115407 (2017)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, 한국, 10-2017-0094759 (2017)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, 한국, 10-2017-0094759 (2017)
  • 이성학,조용희,김동근,최원미,손석수,김형섭,이병주, V-Cr-Fe-Ni계 고강도 고엔트로피 합금, 한국, 10-2017-0105477 (2017)
  • 이성학,조용희,김동근,최원미,손석수,김형섭,이병주, V-Cr-Fe-Ni계 고강도 고엔트로피 합금, 한국, 10-2017-0105477 (2017)
  • 이성학,조용희,김동근,손석수,최원미,김형섭,이병주, Co-Cr-Fe-Ni-V계 고엔트로피 합금, 한국, 10-2017-0090760 (2017)
  • 김형섭,이학현,윤재익,이세암, 단일 롤을 이용한 금속판재의 연속 균일전단변형 공정, 한국, 10-2017-0073282 (2017)
  • 김형섭,이학현,윤재익,이세암, 단일 롤을 이용한 금속판재의 연속 균일전단변형 공정, 한국, 10-2017-0073282 (2017)
  • 김형섭,박노근,최민구,이재학,백승민,김보희, 금속 복합체, -, PCT/KR2017/0032 (2017)
  • 김형섭,백승미,한세광,신명환,문종언,이세암,정호상, 생체 의료용 타이타늄 및 생체 의료용 타이타늄의 제조방법, 한국, 10-2017-0064494 (2017)
  • 김형섭,백승미,한세광,신명환,문종언,이세암,정호상, 생체 의료용 타이타늄 및 생체 의료용 타이타늄의 제조방법, 한국, 10-2017-0064494 (2017)
  • 김형섭,엄호용,배재웅,문종언,최원미,이병주,장민지,임다미, Fe-Co-Ni-Cr 계 중 엔트로피 합금, 한국, 10-2017-0065197 (2017)
  • 김형섭,엄호용,배재웅,문종언,최원미,이병주,장민지,임다미, Fe-Co-Ni-Cr 계 중 엔트로피 합금, 한국, 10-2017-0065197 (2017)
  • 김형섭,윤재익,이학현,정재면, 축소 크기의 시편으로 시편 크기 효과가 없는 신장플랜지성을 측정하는 방법, 한국, 10-2017-0058548 (2017)
  • 김형섭,윤재익,이학현,정재면, 축소 크기의 시편으로 시편 크기 효과가 없는 신장플랜지성을 측정하는 방법, 한국, 10-2017-0058548 (2017)
  • 김형섭,박노근,최민구,이재학,백승민,김보희, 금속 복합체, 한국, 10-2017-0037983 (2017)
  • 김형섭,문종언,배재웅, 극저온 기계적 물성이 우수한 중엔트로피 합금, 한국, 10-2017-0045258 (2017)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, Cr-Fe-Mn-Ni-V계 고 엔트로피 합금, -, PCT/KR2017/0029 (2017)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, 극저온용 고 엔트로피 합금, -, PCT/KR2017/0029 (2017)
  • 김형섭,문종언,이병주,배재웅,최원미,장민지, Al 첨가 고엔트로피 합금의 가공성 향상 방법, 한국, 10-2017-0056847 (2017)
  • 김형섭,문종언,이병주,배재웅,최원미,장민지, Al 첨가 고엔트로피 합금의 가공성 향상 방법, 한국, 10-2017-0056847 (2017)
  • 이병주,이성학,김형섭,나영상,정승문,홍순익,최원미,전창우, 극저온용 고 엔트로피 합금, 한국, 10-2017-0032629 (2017)
  • 이병주,이성학,김형섭,홍순익,나영상,정승문,전창우,최원미, Cr-Fe-Mn-Ni-V계 고 엔트로피 합금, 한국, 10-2017-0032630 (2017)
  • 문지현,엄호용,윤재익,백승미,김형섭, 표면연마를 적용시켜 기계적 성질이 향상된 금속 봉재의 비틀림 강소성 가공법, 한국, 10-2017-0034782 (2017)
  • 문지현,엄호용,윤재익,백승미,김형섭, 표면연마를 적용시켜 기계적 성질이 향상된 금속 봉재의 비틀림 강소성 가공법, 한국, 10-2017-0034782 (2017)
  • 이병주,이성학,김형섭,최원미,손석수,조용희, Co-Cu-Ni-Mn계 고엔트로피 합금, 한국, 10-2017-0065196 (2017)
  • 이병주,이성학,김형섭,최원미,손석수,조용희, Co-Cu-Ni-Mn계 고엔트로피 합금, 한국, 10-2017-0065196 (2017)
  • 김형섭,김정기,루슬란 발리에프,조지 랍,마리나 카라바에바,나리만 에니키브,마리나 아브라모바, 멀티 강화기구 초 고강도 고 망간강의 제조 및 방법, 러시아연방, 2016148498 (2017)
  • 김형섭,김정기,루슬란 발리에프,조지 랍,마리나 카라바에바,나리만 에니키브,마리나 아브라모바, 초고강도 고망간강 및 이의 제조방법, 한국, 10-2017-0020287 (2016)
  • 김형섭,김정기,루슬란 발리에프,조지 랍,마리나 카라바에바,나리만 에니키브,마리나 아브라모바, 초고강도 고망간강 및 이의 제조방법, 한국, 10-2017-0020287 (2016)
  • 김형섭,백승미,한세광,신명환,정호상,문종언,이세암, 순 타이타늄의 강도와 젖음성을 향상시키는 방법, 한국, 10-2016-0143105 (2016)
  • 김형섭,안동현,이성학,주수현,이병주,나영상,홍순익,문종언,장민지,황동수, 고엔트로피 합금의 방오특성을 향상시키는 방법, USA, 15/344,662 (2016)
  • 김형섭,박노근,최민구,이재학,백승민,김보희, 금속 복합체, 한국, 10-2016-0035008 (2016)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, Cr-Fe-Mn-Ni-V계 고 엔트로피 합금, 한국, 10-2016-0033419 (2016)
  • 이병주,정승문,이성학,김형섭,나영상,홍순익,최원미,전창우, 극저온용 고 엔트로피 합금, 한국, 10-2016-0033418 (2016)
  • 김형섭,문종언,장민지,안동현,주수현,이병주,나영상,홍순익,이성학,황동수, 고엔트로피 합금의 방오특성을 향상시키는 방법, 한국, 10-2016-0031993 (2016)
  • 김형섭,문종언,안동현,장민지,주수현, 고엔트로피 합금의 경도 및 내마모성 향상방법, 한국, 10-2016-0034448 (2016)
  • 김형섭,문종언,주수현,정혁재, 강관의 기계적 물성 예측 방법, 한국, 10-2016-0027608 (2016)
  • 김형섭,윤재익,정재면,주수현,진광근,송태진, 재료의 가공 특성을 고려한 공정 과정의 변화를 통해 재료의 구멍확장성을 증가시키는 방법, 한국, 10-2015-0164422 (2015)
  • 김형섭,윤재익,정재면,주수현,진광근,송태진, 구멍 주변의 미세 결함을 제거함으로써 재료의 구멍확장성을 증가시키는 방법, 한국, 10-2015-0164421 (2015)
  • 이종수,이용문,한세광,이병갑,이태경,오상호,김형섭,차형준, 뼈의 형상을 모방한 생체 의료용 다공성 타이타늄 및 그의 제조방법, 한국, 10-2015-0181533 (2015)
  • 이종수,이용문,한세광,이병갑,이태경,오상호,김형섭,차형준, 뼈의 형상을 모방한 생체 의료용 다공성 타이타늄 및 그의 제조방법, 한국, 10-2015-0181533 (2015)
  • 김형섭,정재면,강지윤,엄호용, 원뿔형 금속관재의 비틀림 강소성 가공용 금형, 한국, 10-2015-0044444 (2015)
  • 김형섭,정재면,강지윤,엄호용, 원뿔형 금속관재의 비틀림 강소성 가공용 금형, 한국, 10-2015-0044444 (2015)
  • 김형섭,안동현,김우열,박이주, 극저온 시험을 위한 가스 총 시스템 및 이를 이용한 충격 변형 시험방법, 한국, 10-2015-0030529 (2015)
  • 김형섭,안동현,김우열,박이주, 극저온 시험을 위한 가스 총 시스템 및 이를 이용한 충격 변형 시험방법, 한국, 10-2015-0030529 (2015)
  • 김형섭,강지윤,정재면,LatypovMarat,박효욱, 열박음 공정을 이용한 아키텍쳐드 복합재의 제조방법, 한국, 10-2015-0031414 (2015)
  • 김형섭,강지윤,정재면,LatypovMarat,박효욱, 열박음 공정을 이용한 아키텍쳐드 복합재의 제조방법, 한국, 10-2015-0031414 (2015)
  • 김형섭,강지윤,정재면,박효욱,LatypovMarat, 분말 소결법을 이용한 아키텍쳐드 복합재의 제조방법, 한국, 10-2015-0031415 (2015)
  • 김형섭,강지윤,정재면,박효욱,LatypovMarat, 분말 소결법을 이용한 아키텍쳐드 복합재의 제조방법, 한국, 10-2015-0031415 (2015)
  • 김형섭,주수현,박효욱,강희수,이언식, 분말야금용 하모닉 구조 분말, 하모닉 구조분말의 제조방법, 하모닉 구조 분말을 이용한 분말성형방법, 한국, 10-2015-0005999 (2014)
  • 김형섭,윤재익,이동준,정재면,김정기,정혁재, 인장시험에서 디지털 이미지 해석 기법을 이용하여 고 변형구간에서 재료의 진응력-진변형률 곡선을 추출하는 방법, 한국, 10-2014-0187926 (2014)
  • 김형섭,윤재익,이동준,정재면,김정기,정혁재, 인장시험에서 디지털 이미지 해석 기법을 이용하여 고 변형구간에서 재료의 진응력-진변형률 곡선을 추출하는 방법, 한국, 10-2014-0187926 (2014)
  • 김형섭,주수현,박효욱,이언식,강희수, 분말야금용 하모닉 구조 분말 및 이를 이용한 분말성형방법, 한국, 10-2014-0190508 (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, 중국, 201280062230.X (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, 중국, 201280062230.X (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, 중국, 201280062230.X (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, 일본, 2014-547087 (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, 일본, 2014-547087 (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, USA, 14/365,837 (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, USA, 14/365,837 (2014)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, EP, 12856595.9 (2014)
  • 김형섭,이동준,안동현,김준원, 금속재료의 강도증가장치 및 강도증가방법, 한국, 10-2014-0151370 (2014)
  • 김형섭,이동준,안동현,김준원, 금속재료의 강도증가장치 및 강도증가방법, 한국, 10-2014-0151370 (2014)
  • 김형섭,PIDONGHAI,이동준,홍순익, 고압 비틀림 공정을 이용한 적층복합재료의 제조 방법, 한국, 10-2014-0099811 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 중국, 201280051601.4 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 중국, 미정 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 중국, 201280051601.4 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 중국, 201280051601.4 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 일본, 2014-536973 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 일본, 미정 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 일본, 2014-536973 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, USA, 14/351,880 (2014)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, USA, 14/351,880 (2014)
  • 김형섭,주수현, 링 구속법에 의한 압축 비틀림 강소성 가공법, 한국, 10-2014-0047865 (2014)
  • 김형섭,주수현, 링 구속법에 의한 압축 비틀림 강소성 가공법, 한국, 10-2014-0047865 (2014)
  • 김형섭,김정기,LatypovMarat,정하국,이종범, 다심 압출 공정을 이용한 역조화구조를 갖는 복합재료의 제조방법과 이 방법에 의해 제조된 복합재료, 한국, 10-2014-0010264 (2013)
  • 김형섭,이동준,엄호용,이병갑,이종수,한세광,여준한, 벌크 봉상재와 금속 분말을 이용한 임플란트용 복합 다공질 재료 및 그 제조 방법, 한국, 10-2013-0137934 (2013)
  • 한세광,이종수,김형섭,오상호,차형준,조동우,정호상,정지원,이병갑,최영진,여준한, 그래핀을 사용한 티타늄의 표면개질 방법 및 임플란트용 티타늄, 한국, 10-2013-0121567 (2013)
  • 한세광,이종수,김형섭,오상호,차형준,조동우,정호상,정지원,이병갑,최영진,여준한, 그래핀을 사용한 티타늄의 표면개질 방법 및 임플란트용 티타늄, 한국, 10-2013-0121567 (2013)
  • 김형섭,엄호용,이동준,정혁재,조익준,김영훈, 미세 결정립을 갖는 관재의 제조방법, 한국, 10-2013-0119287 (2013)
  • 이성학,김충년,전창우,김형섭,주수현, 타이타늄 합금을 이용한 비정질 복합재료와 그 제조방법, 한국, 10-2013-0007447 (2013)
  • 이성학,김충년,전창우,김형섭,주수현, 타이타늄 합금을 이용한 비정질 복합재료와 그 제조방법, 한국, 10-2013-0007447 (2013)
  • 이종수,이병갑,이용문,오상호,한세광,김형섭,차형준,여준한, 생체 의료용 다공성 타이타늄 및 그의 제조방법, 한국, 10-2013-0050278 (2012)
  • 김형섭,엄호용,정혁재,이동준, 금속관재의 강소성 가공방법 및 그 장치, 한국, 10-2013-0002149 (2012)
  • 김형섭,엄호용,정혁재,이동준, 금속관재의 강소성 가공방법 및 그 장치, 한국, 10-2013-0002149 (2012)
  • 김형섭,윤은유,엄호용,이성,이동준, 원뿔형 금속관재의 비틀림 강소성 가공법, -, PCT/KR2012/0103 (2012)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, -, PCT/KR2012/0079 (2012)
  • 김형섭,이동준,윤은유,안동현,이언식,강희수,김하늘, 3차원 측정기를 이용한 분말 표면 조도의 정량화 방법, 한국, 10-2013-0077719 (2012)
  • 김형섭,이동준,윤은유,안동현,이언식,강희수,김하늘, 3차원 측정기를 이용한 분말 표면 조도의 정량화 방법, 한국, 10-2013-0077719 (2012)
  • 김형섭,LatypovMarat,이동준,정하국,이종범, 계층적 셀 구조를 갖는 다공질 금속재료 및 그 제조방법, 한국, 10-2012-0091672 (2012)
  • 김형섭,LatypovMarat,이동준,정하국,이종범, 계층적 셀 구조를 갖는 다공질 금속재료 및 그 제조방법, 한국, 10-2012-0091672 (2012)
  • 김형섭,이동준,안동현,윤은유,주수현, 디지털 이미지 해석을 이용한 층상 복합재료의 계면 접합 특성 평가방법, 한국, 10-2012-0054103 (2012)
  • 김형섭,이동준,안동현,윤은유,주수현, 디지털 이미지 해석을 이용한 층상 복합재료의 계면 접합 특성 평가방법, 한국, 10-2012-0054103 (2012)
  • 김형섭,정혁재, 관형 금속재료의 결정립 미세화 방법, 한국, 10-2012-0129149 (2011)
  • 김형섭,정혁재, 관형 금속재료의 결정립 미세화 방법, 한국, 10-2012-0129149 (2011)
  • 김형섭,주수현, 재료의 초미세 국부 변형률 측정방법, 한국, 10-2011-0141049 (2011)
  • 김형섭,엄호용,윤은유,이동준,이성, 원뿔형 금속관재의 비틀림 강소성 가공법, 한국, 10-2011-0136224 (2011)
  • 김형섭,엄호용,윤은유,이동준,이성, 원뿔형 금속관재의 비틀림 강소성 가공법, 한국, 10-2011-0136224 (2011)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 한국, 10-2011-0107407 (2011)
  • 김형섭,최강현,이동준, 압축비틀림을 이용한 나선형 층상복합재료 제조 방법, 한국, 10-2011-0107407 (2011)
  • 김형섭,Ghader Faraji Esfangareh, 관형 금속재료의 결정립 미세화 방법, 한국, 10-2011-0045806 (2011)