Profile

Hang Jin Jo 사진
Profile.
Name Hang Jin Jo
Organization Div. of Advanced Nuclear Enginrg
Telephone 054-279-9560
E-mail jhj04@postech.ac.kr
Homepage

Education

  • 2008.03 ~ 2013.02 POSTECH (통합-열수력)
  • 2004.03 ~ 2008.02 POSTECH (학사-열수력)

Career

  • 2015.03 ~ 2019.02 : UNIV. OF WISCONSIN-MADISON DEPT. OF ENGINEERING PHYSICS
  • 2011.02 ~ 2015.02 : POSTECH 첨단원자력공학단

Profession

Journal Papers

International

  • Experimental study of a straight channel printed circuit heat exchanger on supercritical CO2 near the critical point with water cooling, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 150, - (2020)
  • One-dimensional design approach to integrated steam generator with helical-coil tube bundles for a sodium-cooled fast reactor, NUCLEAR ENGINEERING AND DESIGN, , 361, - (2020)
  • Stratified steam explosion energetics, Nuclear Engineering and Technology, , 51, 95-103 (2019)
  • Development of anodization technique on zirconium silicide material for reproducing micro/nanosurface structure: Application to nuclear accident tolerant fuel cladding, SURFACE & COATINGS TECHNOLOGY, , 374, 171-180 (2019)
  • Evaluation of critical heat flux of ATF candidate coating materials in pool boiling, NUCLEAR ENGINEERING AND DESIGN, , 354, - (2019)
  • Leidenfrost temperature on porous wick surfaces: Decoupling the effects of the capillary wicking and thermal properties, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 145, - (2019)
  • Effect of surface structure and coating on the heat transfer deflection behavior in the early stage of nucleate boiling, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 126, 1315-1322 (2018)
  • Impact of corrosion on the emissivity of advanced reactor structural alloys, Journal of Nuclear Materials, , 508, 465-471 (2018)
  • CFD modeling of filmwise steam condensation with noncondensable gas with modified boundary condition, International Journal of Heat and Mass Transfer, , 125, 485-493 (2018)
  • Transient pool boiling heat transfer of oxidized and roughened Zircaloy-4 surfaces during water quenching, International Journal of Heat and Mass Transfer, , 120, 435-446 (2018)
  • Minimum heat flux (MHF) behavior with different surface characteristics including structured surfaces and different surface energies, International Journal of Heat and Mass Transfer, , 127, 414-421 (2018)
  • Potential Recovery Actions from a Severe Accident in a PWR: MELCOR Analysis of a Station Blackout Scenario, Nuclear Technology, , 204, 1-14 (2018)
  • Critical heat flux experiments and a post-CHF heat transfer analysis using 2D inverse heat transfer, Nuclear Engineering and Design, , 337, 17-26 (2018)
  • Effects of surface roughness, oxidation, and temperature on the emissivity of reactor pressure vessel alloys, Nuclear Technology, , 200, 1-14 (2017)
  • MELCOR analysis of OSU multi-Application small light water reactor (MASLWR) experiment, Nuclear Technology, , 198, 277-292 (2017)
  • Assessment of MELCOR condensation models with the presence of noncondensable gas in natural convection flow regime, Nuclear Engineering and Design, , 317, 110-117 (2017)
  • Computation of total hemispherical emissivty from directional spectral models, International Journal of Heat and Mass Transfer, , 109, 894-906 (2017)
  • Spectral emissivity of oxidized and roughened metal surfaces, International Journal of Heat and Mass Transfer, , 115, 1065-1071 (2017)
  • Film boiling heat transfer on a completely wettable surface with atmospheric saturated distilled water quenching, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 93, 67-74 (2016)
  • Single bubble dynamics on hydrophobic-hydrophilic mixed surfaces, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 93, 554-565 (2016)
  • Effects of heat flux on dropwise condensation on a superhydrophobic surface, Journal of Mechanical Science and Technology, , 30, 2141-2149 (2016)
  • Boiling characteristics on the reduced graphene oxide films, EXPERIMENTAL THERMAL AND FLUID SCIENCE, , 60, 361-366 (2015)
  • Boiling on spatially controlled heterogeneous surfaces: Wettability patterns on microstructures, APPLIED PHYSICS LETTERS, , 106, - (2015)
  • Boiling performance and material robustness of modified surfaces with multi scale structures for fuel cladding development, Nuclear Engineering and Design, , 291, 204-211 (2015)
  • Loss of superhydrophobicity of hydrophobic micro/nano structures during condensation, Scientific Reports, , 5, - (2015)
  • Tunable, self-assembled 3D reduced graphene oxide structures fabricated via boiling, Carbon, , 81, 357-366 (2015)
  • Critical heat flux and nucleate boiling on several heterogeneous wetting surfaces: Controlled hydrophobic patterns on a hydrophilic substrate, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, , 62, 101-109 (2014)
  • Enhanced heat transfer is dependent on thickness of graphene films: the heat dissipation during boiling, SCIENTIFIC REPORTS, , 4, 6276- (2014)
  • Heterogeneous bubble nucleation on ideally-smooth horizontal heated surface, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 71, 149-157 (2014)
  • Nucleate boiling performance on nano/microstructures with different wetting surfaces, NANOSCALE RESEARCH LETTERS, , 7, 242-12 (2012)
  • Effect of liquid spreading due to nano/microstructures on the critical heat flux during pool boiling, APPLIED PHYSICS LETTERS, , 98, - (2011)
  • Visualization study of the effects of nanoparticles surface deposition on convective flow boiling CHF from a short heated wall, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, , 37, 215-228 (2011)
  • A study of nucleate boiling heat transfer on hydrophilic, hydrophobic and heterogeneous wetting surfaces, INTERNATIONAL JOURNAL OF HEAT AND MASS TRANSFER, , 54, 5643-5652 (2011)
  • Effects of nano-fluid and surfaces with nano structure on the increase of CHF, EXPERIMENTAL THERMAL AND FLUID SCIENCE, , 34, 487-495 (2010)
  • Pool boiling CHF enhancement by micro/nanoscale modification of zircaloy-4 surface, NUCLEAR ENGINEERING AND DESIGN, , 240, 3350-3360 (2010)
  • Experimental study of critical heat flux enhancement during forced convective flow boiling of nanofluid on a short heated surface, INTERNATIONAL JOURNAL OF MULTIPHASE FLOW, , 36, 375-384 (2010)
  • 실리콘 표면 위에 소수성 점을 이용한 비등 열전달 증진에 관한 실험적 연구, 대한기계학회논문집 B권, , 34, 655-663 (2010)
  • Experimental Investigation of CHF Enhancement on the Modified Surface Under Pool Boiling, Transactions of the KSME, B, , 33, 840-848 (2009)
  • Experimental investigation on the pool boiling critical heat flux of water-based alumina and titania nanofluids on a flat plate heater, Transactions of the KSME, B, , 33, 729-736 (2009)

Domestic Journal Papers

  • Study of Leidenfrost Mechanism in Droplet Impacting on Hydrophilic and Hydrphobic surfaces, International Journal of Air-Conditioning and Refrigeration, , 21, 1350028-. (2013)

General Journal Papers

Conference Proceedings

Invited Talk or Presentations

Books

Research Activities

  • 초임계 CO2발전 시스템을 위한 신개념 유로 형상 PCHE 기초 설계 및 모듈 시스템 기술 개발, 한국원자력연구원 (2019-2019)
  • DEVELOPMENT OF DIVERTOR HEAT MANAGEMENT TECHNOLOGY, 재단법인한국연구재단 (2019-2019)
  • 조항진_신규부임교수 연구비지원(1차_학과), 포항공과대학교 (2019-2020)
  • 조항진_신규부임교수 기자재지원(1차_대학), 포항공과대학교 (2019-2020)
  • 조항진_신규부임교수 기자재지원(1차_학과), 포항공과대학교 (2019-2020)
  • 조항진_신규부임교수 연구비지원(1차_학과), 포항공과대학교 (2019-2020)
  • 4.15675_이월과제, 재단법인한국연구재단 (2019-2019)
  • ASSESSMENT OF KEY SAFETY ISSUES AND RESEARCH ON FUNDAMENTAL TECHNOLOGIES OF POWER CONVERSION SYSTEM FOR SFR, 재단법인한국연구재단 (2019-2020)
  • 학생인건비통합관리과제, 포항공대산학협력단 (2020-2040)
  • 초임계 CO2발전 시스템을 위한 신개념 유로 형상 PCHE 기초 설계 및 모듈 시스템 기술 개발, 한국원자력연구원 (2020-2020)
  • DEVELOPMENT OF DIVERTOR HEAT MANAGEMENT TECHNOLOGY, 재단법인한국연구재단 (2020-2020)
  • 조항진_신규부임교수 기자재지원(2차_학과), 포항공과대학교 (2020-2021)
  • 조항진_신규부임교수 연구비지원(2차_학과), 포항공과대학교 (2020-2021)
  • 조항진_신규부임교수 연구비지원(2차_학과), 포항공과대학교 (2020-2021)
  • 고속카메라 및 적외선 열화상 기법을 이용한 핵비등이탈 현상 실험 및 해석, 한국원자력연구원 (2020-2020)
  • 조항진_신규부임교수 연구비지원(2차_학과), 포항공과대학교 (2020-2021)
  • ASSESSMENT OF KEY SAFETY ISSUES AND RESEARCH ON FUNDAMENTAL TECHNOLOGIES OF POWER CONVERSION SYSTEM FOR SFR, 재단법인한국연구재단 (2020-2021)
  • VERIFICATION OF THE STRATIFICATION PHENOMENON ON DECAY TANK OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2020-2020)
  • MEASUREMENT OF THE FLOW DISTRUBITION AND PRESSURE DROP OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2020-2020)
  • [간접비] 수출용 신형연구로 개발 및 실증지원 사업, 포항공대산학협력단 (2020-2020)
  • 초임계 CO2발전 시스템을 위한 신개념 유로 형상 PCHE 기초 설계 및 헤더부 설계 기술 개발, 한국원자력연구원 (2020-2021)
  • 조항진_신규부임교수 초기정착비(3차_학과), 포항공과대학교 (2021-2022)
  • DEVELOPMENT OF DIVERTOR HEAT MANAGEMENT TECHNOLOGY, 재단법인한국연구재단 (2021-2021)
  • ASSESSMENT OF KEY SAFETY ISSUES AND RESEARCH ON FUNDAMENTAL TECHNOLOGIES OF POWER CONVERSION SYSTEM FOR SFR, 재단법인한국연구재단 (2021-2021)
  • DEVELOPMENT OF X-RAY VISUALIZATION TECHNIQUE FOR DESIGN OPTIMIZATION OF FUEL CELL ELEMENT PARTS, 현대엔지비(주) (2021-2022)
  • 초임계 CO2발전 시스템을 위한 신개념 유로 형상 PCHE 기초 설계 및 헤더부 설계 기술 개발, 한국원자력연구원 (2021-2022)
  • VERIFICATION OF THE STRATIFICATION PHENOMENON ON DECAY TANK OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2021-2021)
  • MEASUREMENT OF THE FLOW DISTRIBUTION AND PRESSURE DROP OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2021-2021)
  • 4.0019232_이월과제, 재단법인한국연구재단 (2021-2021)
  • EFFICIENCY IMPROVEMENT VIA SOLID HEAT RECUPERATION AND SYSTEM DESIGN AND EVALUATION CONSIDERING THE APPLICATION OF NUCLEAR HEAT SOURCE TO TWO-STEP THERMOCHEMICAL HYDROGEN PRODUCTION, 한국수력원자력(주) (2021-2022)
  • DESIGN OF INTEGRATED-COMPACT HEAT EXCHANGER AND POWER CONVERSION SYSTEM FOR TRANSPORTABLE SMALL MODULAR REACTORS (SMRS) AND MICROREACTORS, 재단법인한국연구재단 (2021-2022)
  • 고효율 튜브 INSERT 열전달성능 시험, (재)포항산업과학연구원 (2021-2021)
  • 연구개발과제[2021년 신설], 포항공과대학교 (2021-2040)
  • VERIFICATION OF THE STRATIFICATION PHENOMENON ON DECAY TANK OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2022-2022)
  • A STUDY ON THE IMPROVEMENT OF COOLING PERFORMANCE OF DIVERTOR IN DEMO, 한국핵융합에너지연구원 (2022-2022)
  • 초임계 CO2발전 시스템을 위한 신개념 유로 형상 PCHE 기초 설계 및 헤더부 설계 기술 개발, 한국원자력연구원 (2022-2024)
  • CONCEPTUAL DESIGN OF SUPERCRITICAL CO2 INTERMEDIATE HEAT EXCHANGER FOR ADVANCED NUCLEAR REACTORS, 재단법인한국연구재단 (2022-2022)
  • 암모니아 슬립 영향 평가, (재)포항산업과학연구원 (2022-2023)
  • 디버터 공학기술 검증을 위한 기반기술 개발, 재단법인한국연구재단 (2022-2023)
  • A STUDY ON RADIOACTIVE WASTE TREATMENT STATUS AT THE FUKUSHIMA NUCLEAR POWER PLANT SITE, 한국원자력안전기술원 (2022-2022)
  • DEVELOPMENT AND DEMONSTRATION OF HYBRID POWER SYSTEM USING ORC(ORGANIC RANKINE CYCLE) AND TEG(THERMOELECTRIC GENERATOR) FOR LOW AND MEDIUM TEMPERATURE INDUSTRIAL WASTE HEAT RECOVERY, 한국에너지기술평가원 (2022-2022)
  • DESIGN OF INTEGRATED-COMPACT HEAT EXCHANGER AND POWER CONVERSION SYSTEM FOR TRANSPORTABLE SMALL MODULAR REACTORS (SMRS) AND MICROREACTORS, 재단법인한국연구재단 (2022-2023)
  • EFFICIENCY IMPROVEMENT VIA SOLID HEAT RECUPERATION AND SYSTEM DESIGN AND EVALUATION CONSIDERING THE APPLICATION OF NUCLEAR HEAT SOURCE TO TWO-STEP THERMOCHEMICAL HYDROGEN PRODUCTION, 한국수력원자력(주) (2022-2023)
  • 4.0022855_이월과제, 재단법인한국연구재단 (2022-2023)
  • ESTABLISHMENT OF IMPROVEMENT MEASURES FOR IMPLEMENTATION OF SURVEY ON SAFE MANAGEMENT OF RADIATION IN THE NATURAL ENVIRONMENT, 한국원자력안전기술원 (2023-2023)
  • CONCEPTUAL DESIGN OF SUPERCRITICAL CO2 INTERMEDIATE HEAT EXCHANGER FOR ADVANCED NUCLEAR REACTORS, 재단법인한국연구재단 (2023-2023)
  • 4.0023705_이월과제(3차국고), 재단법인한국연구재단 (2023-2024)
  • 4단계 BK21사업 4차년도 미래사회를 위한 첨단원자력융합 교육연구단(국고), 재단법인한국연구재단 (2023-2024)
  • 2023년 원자력전문인력양성사업 교비대응자금, 포항공과대학교 (2023-2023)
  • DEVELOPMENT AND DEMONSTRATION OF HYBRID POWER SYSTEM USING ORC(ORGANIC RANKINE CYCLE) AND TEG(THERMOELECTRIC GENERATOR) FOR LOW AND MEDIUM TEMPERATURE INDUSTRIAL WASTE HEAT RECOVERY, 한국에너지기술평가원 (2023-2023)
  • 2023년 원자력전문인력양성사업, 경상북도 (2023-2023)
  • 4.24725_이월과제, 한국에너지기술평가원 (2023-2023)
  • 미래사회를 위한 첨단원자력융합 교육연구단 부서연구관리비, 포항공과대학교 (2023-2024)
  • 디버터 공학기술 검증을 위한 기반기술 개발, 재단법인한국연구재단 (2023-2023)
  • A STUDY ON THE IMPROVEMENT OF COOLING CAPACITY AND THE COOLANT SYSTEM FOR THE DEMO DIVERTOR, 한국핵융합에너지연구원 (2023-2023)
  • A STUDY ON THE ANALYSIS OF SAFETY REVIEW GUIDELINES ON DECOMMISSIONING OF DOMESTIC AND FOREIGN NUCLEAR POWER PLANTS, 한국원자력안전기술원 (2023-2023)
  • DEVELOPMENT OF EFFECTIVE REGISTRATION SYSTEM FOR SAFE MANAGEMENT OF RADIATION IN THE NATURAL ENVIRONMENT, 한국원자력안전기술원 (2023-2023)
  • VERIFICATION OF THE STRATIFICATION PHENOMENON ON DECAY TANK OF NEW TYPE RESEARCH REACTOR, 재단법인한국연구재단 (2023-2023)
  • 초소형 원자로 개발 동향 및 수송 관련 설계 개념/규정 분석, 삼성중공업(주) (2023-2023)
  • 암모니아 SLIP 조건에 대한 부식시편 분석 및 영향 검토, (재)포항산업과학연구원 (2023-2023)
  • [UGRP]로터 세일 구조를 활용한 선박의 에너지 효율 개선 및 확장 가능 사례에 관한 탐구, 포항공과대학교 (2023-2024)
  • (2차년도)미래에너지, 재단법인한국연구재단 (2023-2024)
  • 고효율 WIRE MESH INSERT 성능 테스트, (재)포항산업과학연구원 (2023-2023)
  • 고온의 배관 및 기기에 적용되는 재사용 가능 단열재 표면 재질에 따른 방산열량 차이 시뮬레이션 및 실험, (주)동인엔지니어링 (2023-2023)
  • 비대칭 WIRE TUBE INSERT 성능 테스트, (재)포항산업과학연구원 (2023-2023)
  • DESIGN OF INTEGRATED-COMPACT HEAT EXCHANGER AND POWER CONVERSION SYSTEM FOR TRANSPORTABLE SMALL MODULAR REACTORS (SMRS) AND MICROREACTORS, 재단법인한국연구재단 (2023-2024)
  • EFFICIENCY IMPROVEMENT VIA SOLID HEAT RECUPERATION AND SYSTEM DESIGN AND EVALUATION CONSIDERING THE APPLICATION OF NUCLEAR HEAT SOURCE TO TWO-STEP THERMOCHEMICAL HYDROGEN PRODUCTION, 한국수력원자력(주) (2023-2024)

IP

  • 조항진,김도은,한태양, 마이크로 채널 부재 및 그 제조 방법, 그리고 이를 포함하는 수전해 장치, 열 교환기, 반응기, 냉각기, 그리고 물방울 기반 발전기, 한국, 10-2023-0103714 (2023)
  • 조항진,임지환,오훈교,박민규,황돈관, 멀티스케일 구조 설계를 통한 증진된 열전달 성능을 가지는 사각구조의 디버터 플라즈마 대면체, 한국, 10-2021-0190418 (2021)
  • 한태양,김무환,조항진,최영현, 양친성 표면의 제조 방법, 한국, 10-2021-0018543 (2020)