교원프로필

서동우 사진
교원에 대한 정보를 나타내는 표입니다.
성명 서동우
소속 철강 · 에너지소재대학원
전화번호 054-279-9030
E-mail dongwoo1@postech.ac.kr
Homepage http://cml.postech.ac.kr/

학력

  • 1995.03 ~ 2000.02 서울대학교 (박사-Metallugical Engineering)
  • 1993.03 ~ 1995.02 서울대학교 (석사-Metallugical Engineering)
  • 1990.03 ~ 1993.02 서울대학교 (학사-Metallugical Engineering)

주요경력

  • 2009.09 ~ 2010.09 : POSTECH 철강대학원
  • 2003.01 ~ 2009.08 : 한국기계연구원 부설 재료여구소
  • 2002.03 ~ 2002.12 : 포스코 기술연구원
  • 2001.03 ~ 2002.02 : NATIONAL INSTITUTE FOR MATERIALS SCIENCE, JAPAN
  • 2000.06 ~ 2001.02 : 서울대학교 신소재 공동연구소

전문분야

  • 철강재료
  • 상변태
  • 물리야금

학술지

국제전문학술지

  • Hardness and Transverse Rupture Strength of TiC-Reinforced SKD11 Steel Matrix Composite, Metals and Materials International, , 26, 302-309 (2020)
  • Role of grain size on deformation microstructures and stretch-flangeability of TWIP steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 773, - (2020)
  • Role of retained austenite on adiabatic shear band formation during high strain rate loading in high-strength bainitic steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 778, 139118- (2020)
  • Effect of the magnetic transition of austenite phase on austenite-to-epsilon martensitic transformation in Fe-Mn binary alloys, MATERIALS CHARACTERIZATION, , 163, - (2020)
  • Quenching and partitioning (Q&P) processed medium Mn steel starting from heterogeneous microstructure, Materialia, , 12, - (2020)
  • Analysis of transformation stasis by the Gibbs energy balance (GEB) approach modified to consider carbon redistribution into remaining austenite, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 70, - (2020)
  • Effect of tempering conditions on adiabatic shear banding during dynamic compression and ballistic impact tests of ultra-high-strength armor steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 792, - (2020)
  • A new class of lightweight, stainless steels with ultra-high strength and large ductility, SCIENTIFIC REPORTS, , 10, - (2020)
  • Influence of Initial Pearlite Morphology on the Microstructure Evolution During Heat Treatment of 1.0C-1.5Cr Steel, METALS AND MATERIALS INTERNATIONAL, , 25, 9-17 (2019)
  • Effect of Prior Austenite Grain Size on Hole Expansion Ratio of Quenching and Partitioning Processed Medium-Mn Steel, JOM-JOURNAL OF THE MINERALS METALS & MATERIALS SOCIETY, , 71, 1366-1374 (2019)
  • Austenite morphology and resistance to hydrogen embrittlement in medium Mn transformation-induced plasticity steel, SCRIPTA MATERIALIA, , 169, 52-56 (2019)
  • Influence of Carbon Content and Isothermal Heat Treatment Temperature on the Microstructure and Mechanical Properties of Ultra-High Strength Bainitic Steels, KOREAN JOURNAL OF METALS AND MATERIALS, , 57, 335-342 (2019)
  • Influence of initial microstructures on intercritical annealing behaviour in a medium Mn steel, MATERIALS SCIENCE AND TECHNOLOGY, , 35, 2092-2100 (2019)
  • Screw dislocation driven martensitic nucleation: A step toward consilience of deformation scenario in fcc materials, ACTA MATERIALIA, , 174, 342-350 (2019)
  • Partially-recrystallized ferrite grains and multiple plasticity enhancing mechanisms in a medium Mn steel, MATERIALS CHARACTERIZATION, , 155, - (2019)
  • Hydrogen Behavior in Ti-Added Reduced Activation Ferritic-Martensitic Steels, METALS AND MATERIALS INTERNATIONAL, , , - (2019)
  • Tempering Behavior of TiC-Reinforced SKD11 Steel Matrix Composite, METALS AND MATERIALS INTERNATIONAL, , 24, 644-651 (2018)
  • Effects of Molybdenum Addition on Hydrogen Desorption of TiC Precipitation-Hardened Steel, METALS AND MATERIALS INTERNATIONAL, , 24, 532-536 (2018)
  • Design of online spheroidization process for 1.0C-1.5Cr bearing steel and microstructure analysis, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 49, 1782-1794 (2018)
  • Microstructure and mechanical properties of austempered medium-carbon spring steel, METALS AND MATERIALS INTERNATIONAL, , 24, 693-701 (2018)
  • Medium Mn transformation-induced plasticity steels: Recent progress and challenges, SCRIPTA MATERIALIA, , 126, 63-67 (2017)
  • Atomistic investigations of κ-carbide precipitation in austenitic Fe-Mn-Al-C lightweight steels and the effect of Mo addition, SCRIPTA MATERIALIA, , 127, 97-101 (2017)
  • TiC-SKD11 함침 복합재의 온도에 따른 인장 특성과 파괴거동 변화, KOREAN JOURNAL OF METALS AND MATERIALS, , 55, 156-164 (2017)
  • Oxidation behaviour of Si-containing low-carbon steels, MATERIALS SCIENCE AND TECHNOLOGY, , 33, 991-997 (2017)
  • Tensile test criterion of transformation-induced elasticity and plasticity alloys for load-displacement measurement, JOURNAL OF ALLOYS AND COMPOUNDS, , 711, 305-311 (2017)
  • Influence of heating rate on annealing and reverse transformation behavior of TRIP steels having martensite as starting microstructure, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48, 5217-5222 (2017)
  • Hydrogen permeation in cold-rolled high-Mn twinning-induced plasticity steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 48, 5211-5216 (2017)
  • Quantum-mechanical analysis of effect of alloying elements on ε-martensite start temperature of steels, Scientific Reports, , 7, - (2017)
  • Numerical modelling of moving interfaces under local equilibrium conditions, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 59, 164-170 (2017)
  • Liquid Zn assisted embrittlement of advanced high strength steels with different microstructures, METALS AND MATERIALS INTERNATIONAL, , 22, 187-195 (2016)
  • Surface Selective Oxidation of Sn-Added CMnSi TRIP Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 1705-1719 (2016)
  • Heat treatment response of TiC-reinforced steel matrix composite, METALS AND MATERIALS INTERNATIONAL, , 22, 935-941 (2016)
  • Influence of the Initial Microstructure on the Reverse Transformation Kinetics and Microstructural Evolution in Transformation-Induced Plasticity-Assisted Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 5352-5361 (2016)
  • Influence of initial microstructure on the heat treatment response and tensile properties of TRIP-assisted steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 5259-5265 (2016)
  • Surface Selective Oxidation of Sn-Added CMnSi TRIP Steel (vol 47, pg 1705, 2016), METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 47A, 2536-2536 (2016)
  • Ausforming of medium carbon steel, MATERIALS SCIENCE AND TECHNOLOGY, , 31, 436-442 (2015)
  • Pearlite growth rate in Fe-C and Fe-Mn-C steels, MATERIALS SCIENCE AND TECHNOLOGY, , 31, 487-493 (2015)
  • Cracks in Martensite Plates as Hydrogen Traps in a Bearing Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46, 665-673 (2015)
  • Observation of micro-scale surface morphology with microtexture development during plane strain tensile deformation in AZ31 magnesium alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 46A, 12-17 (2015)
  • Effect of aluminium on hydrogen permeation of high-manganese twinning-induced plasticity steel, SCRIPTA MATERIALIA, , 99, 45-48 (2015)
  • Stability of stainless-steel nanoparticle and water mixtures, POWDER TECHNOLOGY, , 272, 34-44 (2015)
  • Is low phosphorus content in steel a product requirement?, IRONMAKING & STEELMAKING, , 42, 259-267 (2015)
  • Underlying structure of bulky oxide nodule on alumina-forming austenitic stainless steel, SCRIPTA MATERIALIA, , 102, 63-66 (2015)
  • Non-isothermal kinetics model to predict accurate phase transformation and hardness of 22MnB5 boron steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 626, 67-73 (2015)
  • Stress development and shape change during press-hardening process using phase-transformation-based finite element analysis, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 142-170 (2015)
  • Precipitation sequence and its effect on age hardening of alumina-forming austenitic stainless steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 645, 72-81 (2015)
  • Precipitation sequence and its effect on age hardening of alumina-forming austenitic stainless steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 645, 72-81 (2015)
  • Transformation Plasticity in Boron-Bearing Low Carbon Steel, METALS AND MATERIALS INTERNATIONAL, , 21, 799-804 (2015)
  • Stress development and shape change during press-hardening process using phase-transformation-based finite element analysis, INTERNATIONAL JOURNAL OF PLASTICITY, , 73, 142-170 (2015)
  • Variant selection during mechanically induced martensitic transformation of metastable austenite by nanoindentation, SCRIPTA MATERIALIA, , 104, 13-16 (2015)
  • Toughness anisotropy in X70 and X80 linepipe steels, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 439-446 (2014)
  • Hydrogen and aluminium in high-manganese twinning-induced plasticity steel, SCRIPTA MATERIALIA, , 80, 9-12 (2014)
  • Thermo-mechanical-metallurgical modeling for hot-press forming in consideration of the prior austenite deformation effect, INTERNATIONAL JOURNAL OF PLASTICITY, , 58, 154-183 (2014)
  • Hydrogen diffusion and the percolation of austenite in nanostructured bainitic steel, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 470, - (2014)
  • Critical Assessment 2: Hydrogen induced fracture in austenitic, high-manganese TWIP steel, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 1131-1134 (2014)
  • Fabrication of an ultrafine-grained structure by a compositional pinning technique, ACTA MATERIALIA, , 77, 236-247 (2014)
  • Dissolution Behaviour of NbC during Slab Reheating, ISIJ INTERNATIONAL, , 54, 1677-1681 (2014)
  • Austenite in Transformation-Induced Plasticity Steel Subjected to Multiple Isothermal Heat Treatments, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , , - (2014)
  • Interaction of aluminium with hydrogen in twinning-induced plasticity steel, SCRIPTA MATERIALIA, , 87, 9-12 (2014)
  • Effect of copper addition on the characteristics of high-carbon and high-chromium steels, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 614, 36-44 (2014)
  • Effect of constituent phase on mechanical properties of 9Cr-1WVTa reduced activation ferritic-martensitic steels, JOURNAL OF NUCLEAR MATERIALS, , 455, 421-425 (2014)
  • Effect of second phase on the deformation and fracture behavior of multiphase low-density steels, JOM, , 66, 1837-1844 (2014)
  • Selective oxidation of Al rich Fe-Mn-Al-C low density steels, MATERIALS SCIENCE AND TECHNOLOGY, , 30, 1805-1814 (2014)
  • Segregation of phosphorus to ferrite grain boundaries during transformation in Fe-P alloy, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 105, 1166-1172 (2014)
  • Solubility of carbon in tetragonal ferrite in equilibrium with austenite, SCRIPTA MATERIALIA, , 68, 195-198 (2013)
  • Medium-Alloy Manganese-Rich Transformation-induced Plasticity Steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 44, 286-293 (2013)
  • Method for measuring nanoscale local strain in a dual phase steel using digital image correlation with nanodot patterns, SCRIPTA MATERIALIA, , 68, 245-248 (2013)
  • Low-density steels, SCRIPTA MATERIALIA, , 68, 337-338 (2013)
  • Microstructure and tensile behavior of duplex low-density steel containing 5 mass% aluminum, SCRIPTA MATERIALIA, , 68, 365-369 (2013)
  • Effect of aluminium on hydrogen-induced fracture behaviour in austenitic Fe-Mn-C steel, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 469, - (2013)
  • Interphase precipitation in Ti-Nb and Ti-Nb-Mo bearing steel, MATERIALS SCIENCE AND TECHNOLOGY, , 29, 309-313 (2013)
  • Fe-Al-Mn-C lightweight structural alloys: a review on the microstructures and mechanical properties, SCIENCE AND TECHNOLOGY OF ADVANCED MATERIALS, , 14, 14205- (2013)
  • Kinetic transition during the growth of proeutectoid ferrite in Fe-C-Mn-Si quaternary steel, METALS AND MATERIALS INTERNATIONAL, , 19, 153-158 (2013)
  • Austenite stability and heterogeneous deformation in fine-grained transformation-induced plasticity-assisted steel, SCRIPTA MATERIALIA, , , 933-936 (2013)
  • Effects of Mn, Si and Cr addition on the dissolution and coarsening of pearlitic cementite during intercritical austenitization in Fe-1mass%C alloy, MATERIALS CHARACTERIZATION, , 81, 56-67 (2013)
  • Theory for hydrogen desorption in ferritic steel, COMPUTATIONAL MATERIALS SCIENCE, , 79, 36-44 (2013)
  • Modelling coarsening behaviour of TiC precipitates in high strength, low alloy steels, MATERIALS SCIENCE AND TECHNOLOGY, , 29, 1074-1079 (2013)
  • Mechanical Anisotropy in steels for pipelines, ISIJ INTERNATIONAL, , 53, 1305-1314 (2013)
  • Esimation of phase fraction in dual phase steel using microscopic characterizations and dilatometric analysis, MATERIALS CHARACTERIZATION, , 84, 205-215 (2013)
  • Effect of hydrogen on the surface energy of ferrite and austenite, CORROSION SCIENCE, , 77, 379-384 (2013)
  • Effect of nickel content on the neutron irradiation embrittlement of Ni-Mo-Cr steels, METALS AND MATERIALS INTERNATIONAL, , 19, 1203-1208 (2013)
  • Stability of (Ti, M)C (M = Nb, V, Mo and W) carbide in steels using first-principles calculations, ACTA MATERIALIA, , 60, 208-217 (2012)
  • More complete theory for the calculation of the martensite-start temperature in steels, ISIJ INTERNATIONAL, , 52, 164-166 (2012)
  • Growth kinetics of proeutectoid ferrite in Fe-0.1C-1.5Mn-1Si quaternary and Fe-0.1C-1.5Mn-1Si-0.2Al quinary alloys, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1-10 (2012)
  • Spot weldability of TRIP assisted steels with high carbon and aluminium contents, SCIENCE AND TECHNOLOGY OF WELDING AND JOINING, , 17, 92-98 (2012)
  • Critical assessment: Martensite-start temperature for the gamma to epsilon transformation, CALPHAD-COMPUTER COUPLING OF PHASE DIAGRAMS AND THERMOCHEMISTRY, , 36, 16-22 (2012)
  • Promoting the coalescence of bainite platelets, SCRIPTA MATERIALIA, , 66, 951-953 (2012)
  • Bainite : Fragmentation of crystallographically homogeneous domains, INTERNATIONAL JOURNAL OF MATERIALS RESEARCH, , 103, 476-482 (2012)
  • Role of delamination and crystallography on anisotropy of Charpy toughness in API-X80 steel, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 546, 314-322 (2012)
  • Analysis of transformation plasticity in steel using a finite element method coupled with a phase field model, PLOS ONE, , 7, E35987- (2012)
  • Influence of silicon in low density Fe-C-Mn-Al steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 1731-1735 (2012)
  • Effect of deformation on hydrogen trapping and effusion in TRIP-assisted steel, ACTA MATERIALIA, , 60, 4085-4092 (2012)
  • Experiments to separate the effect of texture on anisotropy of pipeline steel, Materials Science and Engineering A, , 556, 601-606 (2012)
  • Electrochemical hydrogen permeation measurement through TRIP steel under loading condition of phase transition, ELECTROCHEMISTRY COMMUNICATIONS, , 24, 112-115 (2012)
  • Retention of delta-ferrite in aluminium-alloyed TRIP-assisted steels, PROCEEDINGS OF THE ROYAL SOCIETY A-MATHEMATICAL PHYSICAL AND ENGINEERING SCIENCES, , 468, 2904-2914 (2012)
  • Oxidation of silicon containing steel, IRONMAKING & STEELMAKING, , 39, 599-604 (2012)
  • Displacive Phase Transformation and Surface Effects Associated with Confocal Laser Scanning Microscopy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 43A, 4520-4524 (2012)
  • Austenitizing temperature and hardenability of low-carbon boron steels, SCRIPTA MATERIALIA, , 64, 1118-1120 (2011)
  • Dilatometric analysis of cementite dissolution in hypereutectoid steels containing Cr, SCRIPTA MATERIALIA, , 65, 245-248 (2011)
  • A Finite Element Modeling for Dilatometric Nonisotropy in Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 42A, 2094-2106 (2011)
  • Finite element analysis of dimensional non-isotropy during phase transformation in microstructurally banded steel, SCRIPTA MATERIALIA, , 65, 569-572 (2011)
  • Influence of Al on the microstructural evolution and mechanical behavior of low carbon, manganese transformation-induced plasticity steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 397-408 (2010)
  • Strain partitioning and mechanical stability of retained austenite, SCRIPTA MATERIALIA, , 63, 297-299 (2010)
  • Dual orientation and variant selection during diffusional transformation of austenite to allotriomorphic ferrite, JOURNAL OF MATERIALS SCIENCE, , 45, 4126-4132 (2010)
  • Influence of Al on Microstructure and Mechanical Behavior of Cr-Containing Transformation-Induced Plasticity Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 41A, 3276-3281 (2010)
  • Microstructure and Mechanical Behaviors of 0.1C-13Mn Metastable Austenitic Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 40A, 264-268 (2009)
  • Effects of annealing conditions on microstructure and mechanical properties of low carbon, manganese transformation-induced plasticity steel, METALS AND MATERIALS INTERNATIONAL, , 15, 909-916 (2009)
  • A Microstructure-based Analysis for Transformation Induced Plasticity and Mechanically Induced Martensitic Transformation, MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING, , 485, 224-233 (2008)
  • Dilatometric Analysis of Austenite Formation during Intercritical Annealing, METALS AND MATERIALS INTERNATIONAL, , 14, 275-282 (2008)
  • Influence of Cr and Ni on Microstructural Evolution during Heat Treatment of Low Carbon TRIP steels, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 39A, 2015-2019 (2008)
  • Diffusion Controlled Recrystallization and Grain Growth-induced Plasticity of Steel under Externally Applied Stress, PHILOSOPHICAL MAGAZINE, , 88, 1811-1824 (2008)
  • Effect of Molybdenum and Chromium on Hardenability of Low-carbon Boron-added Steels, METALS AND MATERIALS INTERNATIONAL, , 14, 667-672 (2008)
  • Effects of Phosphorous Addition on Mechanical Properties and Retained Austenite Stability of 0.15C-1.5Mn-1.5Al TRIP-aided Cold Rolled Steels, METALS AND MATERIALS INTERNATIONAL, , 13, 13-19 (2007)
  • Plastic Strain due to Isothermal Transformation from Austenite to Ferrite in IF and Low Carbon Steels, MATERIALS TRANSACTIONS, , 48, 882-885 (2007)
  • Dilatometric Analysis of Austenite Decomposition considering the Effect of Non-isotropic Volume Change, ACTA MATERIALIA, , 55, 2659-2669 (2007)
  • Influence of Partial Replacement of Si by Al on the Change of Phase Fraction during Heat Treatment of TRIP Steels, SCRIPTA MATERIALIA, , 57, 1097-1100 (2007)
  • Dilatometric Analysis of Phase Fraction during Austenite Decomposition into Banded Microstructure in Low Carbon Steel, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 38A, 2963-2973 (2007)
  • Diffusion Controlled Transformation Plasticity of Steel under Externally Applied Stress, PHILOSOPHICAL MAGAZINE, , 87, 159-176 (2007)
  • Calculation of transformation plasticity during coherent transformation of steel, ISIJ INTERNATIONAL, , 46, 341-343 (2006)
  • Deformation behaviors of 6061 and 7075 aluminum tubes at elevated temperatures for warm hydroforming, Materials Science Forum, , 475-4, 373-376 (2005)
  • Limit of ferrite grain refinement by severe plastic deformation of austenite, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 36A, 1057-1060 (2005)
  • Variant selection in mechanically-induced martensitic transformation of metastable austenitic steel, ISIJ INTERNATIONAL, , 45, 1217-1219 (2005)
  • Microstructures and electrical conductivity of Cu-Ca alloys for high efficiency induction motors, MATERIALS SCIENCE FORUM, , 449-4, 685-688 (2004)
  • Rapid grain growth of hot extruded Al-Zn-Mg-Cu-(Sc) alloy during heat treatment, Materials Science Forum, , 449-4, 605-608 (2004)
  • Analysis of transformation plasticity during bainitic transformation under externally applied stress, METALS AND MATERIALS INTERNATIONAL, , 10, 221-229 (2004)
  • Effect of initial grain size of austenite on hot-deformed structure of Ni-30Fe alloy, METALLURGICAL AND MATERIALS TRANSACTIONS A-PHYSICAL METALLURGY AND MATERIALS SCIENCE, , 35A, 3399-3408 (2004)
  • Microstructural evolution of Al-Zn-Mg-Cu-(Sc) alloy during hot extrusion and heat treatments, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 155, 1330-1336 (2004)
  • Effects of pre-treatment conditions on warm hydroformability of 7075 aluminum tubes, JOURNAL OF MATERIALS PROCESSING TECHNOLOGY, , 155, 1337-1343 (2004)
  • Effect of external stress on the orientation distribution of ferrite, SCRIPTA MATERIALIA, , 48, 91-95 (2003)
  • A Model for transformation plasticity during bainite transformation of steel under external stress, ACTA MATERIALIA, , 51, 4907-4917 (2003)
  • Evaluation of the deviation angle of ferrite from the Kudjumov-Sachs relationship in a low carbon steel by EBSD, SCRIPTA MATERIALIA, , 46, 375-378 (2002)
  • Dynamic restoration process of Ni-30Fe alloy during hot deformation, ISIJ INTERNATIONAL, , 42, 432-439 (2002)
  • Evaluation of dislocation density from the flow curves of hot deformed austenite, ISIJ INTERNATIONAL, , 42, 564-566 (2002)
  • Evaluation of the orientation distribution of intragranular ferrite grains dynamically formed during deformation in a V-added low carbon steel by EBSD, TEXTURES OF MATERIALS, PTS 1 AND 2, , 408-4, 1239-1244 (2002)
  • Serration of grain boundary in Ni-30Fe alloy through high temperature deformation, ISIJ INTERNATIONAL, , 42, 1026-1032 (2002)
  • Orientation distribution of proeutectoid ferrite nucleated at prior austenite grain boundaries in vanadium-added steel, ISIJ INTERNATIONAL, , 42, 1321-1323 (2002)
  • FEM modeling of flow curves for ferrite/pearlite two-phase steels, ISIJ INTERNATIONAL, , 41, 782-787 (2001)

국내전문학술지

일반학술지

  • Boundary Migration Induced Plasticity during Recrytallization and Growth under Applied Stress, MATERIALS SCIENCE FORUM, , 558-5, 533-537 (2007)
  • Crytallographic Texture in Low Alloy TRIP Steel, MATERIALS SCIENCE FORUM, , 558-5, 1423-1428 (2007)

학술회의논문

학회발표

  • Effect of atmosphere on surface decarburization after coiling of hot-rolled steel, 2019년도 대한금속재료학회 추계학술대회, 0, 0, - (2019)
  • Improvement of mechanical properties of Q&P processed steel by introducing bainitic microstructure, 2019년도 대한금속재료학회 추계학술대회, 0, 0, - (2019)
  • Medium-carbon TRIP-aided bainitic ferrite steels, MS&T19, 0, 0, - (2019)
  • Ti 첨가 RAFM강의 수소거동, 제 33회 첨단구조재료 심포지엄, 0, 0, - (2019)
  • 베이나이트 미세조직을 활용한 중망간 Q&P강의 기계적 물성 향상, 제 33회 첨단구조재료 심포지엄, 0, 0, - (2019)
  • Influence of Nb on the sensitivity to hydrogen-induced fracture in 1180 grade high strength steels, 제 13회 철강과학포럼, 0, 0, - (2019)
  • Influence of temperature and interface condition on surface decarburization and internal oxidation formation in high C steel, 제 13회 철강과학포럼, 0, 0, - (2019)
  • Improvement of mechanical properties of Q&P processed steel by introducing bainitic microstructure, 28th INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2019, 0, 0, - (2019)
  • Mechanical Properties of Medium Carbon Complex Phase Steel consisting of Auto Tempered Martensite and Lower Bainite, 28th INTERNATIONAL CONFERENCE ON METALLURGY AND MATERIALS - METAL 2019, 0, 0, - (2019)
  • 고경도 Armor Steel의 TRIP 현상과 ASB형성 거동 연구, 2019 대한금속재료학회 춘계 학술대회, 0, 0, - (2019)
  • Oxidation behavior of AHSS, ICAS 2018 proceedings, 0, 0, - (2018)
  • Effect of annealing condition on hole expansion ratio (HER) of Q&P processed medium Mn steel, ICAS 2018 proceedings, 0, 0, - (2018)
  • Influence of initial microstructures on intercritical annealing behavior in a medium Mn steel, 2018년도 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2018)
  • Microstructural effects on stretch-flangeability of Q&P processed medium Mn steel, 2018년도 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2018)
  • TiC 입자 강화 Fe계 금속복합소재 열처리에 따른 미세조직과 기계적 성질, 제 32회 첨단구조재료심포지엄 초록집, 0, 0, - (2018)
  • Microstructure and mechanical properties of austempered medium-carbon spring steel, 제12회 철강과학포럼, 0, 0, - (2018)
  • Analysis of mechanical properties on complex phase steel containing bainitic ferrite structure considering the refinement of microstructure, 제12회 철강과학포럼, 0, 0, - (2018)
  • TiC 입자 강화 Fe계 금속복합소재의 항절력에 미치는 템퍼링 온도의 영향, 2018년도 대한금속재료학회 춘계학술대회 초록집, 0, 0, - (2018)
  • Evaluation of Hydrogen Embrittlement Mechanisms of EG 1180 TRIP Steel, 대한금속재료학회 추계 학술대회 초록집, 0, 0, - (2017)
  • 베이나이트계 고강도강의 경도와 충격인성에 미치는 탄소함량 및 열처리의 영향, 대한금속재료학회 추계학술대회 초록집, 0, 0, - (2017)
  • Prediction of austenite fraction during intercritical annealing in medium-Mn steels, 제11회 철강과학포럼, 0, 0, - (2017)
  • 베이나이트 불완전 변태 해석 모델, 제11회 철강과학포럼, 0, 0, - (2017)
  • Si 함유 베이나이트계 초고강도강의 경도와 충격인성에 미치는 탄소함량과 열처리 온도의 영향, 한국군사과학기술학회 종합학술대회 논문집, 0, 0, - (2017)
  • 용융가압함침법으로 제조된 TiC-SKD11 복합재의 템퍼링 거동에 미치는 TiC 분율의 영향, 대한금속재료학회 춘계학술대회 초록집, 0, 0, - (2017)
  • Influence of initial microstructure on the reverse transformation kinetics and microstructure evolution in TRIP-assisted steel, TMS 2017, 0, 0, - (2017)
  • Influence of Si on hydrogen-induced mechanical degradation in medium Mn steel, ., 0, 0, - (2016)
  • 초고강도 베이나이트 강재의 충격인성에 미치는 탄소함량의 영향 , ., 0, 0, - (2016)
  • 고강도 자동차용 강판에서의 수소취성, ., 0, 0, - (2016)
  • Oxidation behaviour of Fe-C-Mn-Si Alloy in reheating furnace, ., 0, 0, - (2016)
  • Microstructure and mechanical properties of heat treated TiC-steel matrix composite, ., 0, 0, - (2016)
  • Hydrogen permeation in TWIP steels, ., 0, 0, - (2016)
  • 침상형 페라이트 TRIP 강의 소둔 거동에 대한 가열속도의 영향, ., 0, 0, - (2016)
  • 용융가압함침법으로 제조된 TiC-SKD11 복합재의 템퍼링 거동에 미치는 TiC volume fraction의 영향, ., 0, 0, - (2016)
  • Influence of Al on hydrogen behavior in TWIP steel, ., 0, 0, - (2016)
  • Hydrogen embrittlement of twinning induced plasticity steels, ., 0, 0, - (2016)
  • Austenite in TRIP steel subjected to multiple isothermal heat treatment, ., 0, 0, - (2016)
  • Influence of Si on hydrogen-induced mechanical degradation in medium Mn steel, ., 0, 0, - (2016)
  • 용융가압함침법으로 제조된 TiC-SKD11 복합재의 템퍼링 거동에 미치는 TiC volume fraction의 영향, ., 0, 0, - (2016)
  • Microstructure and Mechanical Properties of TiC-reinforced Steel Matrix Composite, ., 0, 0, - (2016)
  • Influence of alloying element on the coarsening of (Ti,X)C in high-strength, low-alloy steels, ., 0, 0, - (2015)
  • The effects of the initial microstructure on the reverse transformation kinetics and microstructural evolution in TRIP-assisted steel, ., 0, 0, - (2015)
  • TRIP-assisted steel의 역변태 거동 및 미세조직 발생에 미치는 초기조직 영향, ., 0, 0, - (2015)
  • High Temperature Oxidation in Fe-C-Mn-Si Alloy, ., 0, 0, - (2015)
  • Influence of Al on hydrogen behavior in TWIP steel, ., 0, 0, - (2015)
  • Spot welding of Zn-coated high strength steels, ., 0, 0, - (2015)
  • Hydrogen permeation behaviour in austenitic TWIP steel, ., 0, 0, - (2015)
  • High Temperature Oxidation in Fe-C-Mn-Si Alloy, ., 0, 0, - (2015)
  • Hydrogen permeation behaviour in TWIP steels, ., 0, 0, - (2015)
  • Heat treatment responses of particulate TiC-reinforced tool steel composites, ., 0, 0, - (2015)
  • Hydrogen permeation behaviour of high Mn TWIP steel, ., 0, 0, - (2015)
  • TiC 입자 강화 Fe계 금속복합소재의 열처리에 따른 특성 분석, ., 0, 0, - (2015)
  • 알루미늄이 twinning-induced plasticity 강에서 수소거동에 미치는 영향, ., 0, 0, - (2014)
  • Hydrogen and aluminium in twinning-induced plasticity steel, ., 0, 0, - (2014)
  • 마이크로 레이어 조직이 강재의 충격인성에 미치는 영향, ., 0, 0, - (2014)
  • Temperature, Stress and Phase Analysis of Spot Welding of High Strength Steels Using Finite Element Simulation, ., 0, 0, - (2014)
  • Thermal Conductivity of Stainless Steel-nanofluids, ., 0, 0, - (2014)
  • Pearlite growth in ternary steels, ., 0, 0, - (2014)
  • Effect of hydrogen and aluminium on nano-mechancial properties of high Mn austenitic TWIP steels, ., 0, 0, - (2014)
  • Spot weldability of zinc-coated high manganese steel, ., 0, 0, - (2014)
  • Stability and Thermal Conductivity of Stainless Steel Nanofluids, ., 0, 0, - (2014)
  • Segregation of phosphorus to ferrite grain boundaries during transformation in Fe-P alloy, ., 0, 0, - (2014)
  • 마이크로 레이어 미세조직을 활용한 충격인성 향상, ., 0, 0, - (2014)
  • Mn 분배를 이용한 초세립강의 제조, ., 0, 0, - (2014)
  • 다상조직 저 비중강의 미세조직 및 기계적 거동 분석, ., 0, 0, - (2014)
  • Nano-mechanical evaluation of hydrogen and aluminium effect on high Mn TWIP steel, ., 0, 0, - (2014)
  • Liquid metal embrittlement of Zn-coated high strength steels, ., 0, 0, - (2014)
  • Segregation of phosphorus to ferrite grain boundaries during transformation in Fe–P alloy, ., 0, 0, - (2014)
  • Analysis of hydrogen thermal desorption in ferrite, ., 0, 0, - (2014)
  • Effect of hydrogen and aluminium on nano-mechanical properties of high Mn TWIP steel, ., 0, 0, - (2014)
  • Stability of mixtures of stainless steel nanoparticles and water, ., 0, 0, - (2014)
  • Hydrogen thermal desorption in TRIP steel, ., 0, 0, - (2014)
  • Pearlite growth rate in Fe-Mn-C steels, ., 0, 0, - (2014)
  • Effect of Mn, Si and Cr addition on the spheroidization of cementite in hypereutectoid Fe-1 mass% C steel, ., 0, 0, - (2013)
  • Effect of hydrogen on the surface energy of ferrite and austenite, ., 0, 0, - (2013)
  • 오스테나이트화 온도에서 냉각 시 Fe-P 합금의 입계편석 연구, ., 0, 0, - (2013)
  • Fe-Mn-Al-C 합금의 고온산화 거동 연구, ., 0, 0, - (2013)
  • 비입방정 페라이트에서의 탄소고용도, ., 0, 0, - (2013)
  • Thermal and stress analysis of spot welding of high strength steels, ., 0, 0, - (2013)
  • Stability and thermal conductivity of stainless steel - Nano fluid, ., 0, 0, - (2013)
  • Theory of hydrogen desorption in ferrite, ., 0, 0, - (2013)
  • Influence of alloying elements on the coarsening of (Ti,M)C carbide in high-strength, low-alloy steels, ., 0, 0, - (2013)
  • Pearlite growth rate in multi-component steels, ., 0, 0, - (2013)
  • Solubility of carbon in non-cubic ferrite, ., 0, 0, - (2013)
  • Stability and thermal conductivity of stainless steel - nano fluid, ., 0, 0, - (2013)
  • Numerical analysis of H thermal desorption in ferrite, ., 0, 0, - (2013)
  • Pearlite growth rate in Fe-Mn-C ternary steels, ., 0, 0, - (2013)
  • Oxdiation behavior of Fe-Mn-Al-C alloy at high temperature, ., 0, 0, - (2013)
  • Thermal Conductivity and Stability of Metallic-nanofluids, ., 0, 0, - (2013)
  • Inhomogeneous Deformation in Mn-rich TRIP-assisted Steel, ., 0, 0, - (2013)
  • Influence of Mo on the coarsening of (Ti,Mo)C carbide ih high strength low alloy steels, ., 0, 0, - (2013)
  • High Temperature Oxidation Behavior of Fe-Mn-Al-C Alloy, ., 0, 0, - (2013)
  • 고강도 변태유기소성강에서의 수소거동, ., 0, 0, - (2012)
  • High Temperature Oxidation Behavior of Fe-Mn-Al Alloys with High Al Content, ., 0, 0, - (2012)
  • Influence of C and Mn Concentration on Manganese TRIP steel, ., 0, 0, - (2012)
  • Research on high temperature oxdiation of Al-bearing light weight steel, ., 0, 0, - (2012)
  • Spot weldability of high carbon and aluminum bearing TRIP-assisted steels, ., 0, 0, - (2012)
  • Effect of alloying elements on the growth of ferrite from austenite in multi-component Fe-C base alloys, ., 0, 0, - (2012)
  • Influence of alloying elements on thermal stability of (Ti,M)C carbides in HSLA steel, ., 0, 0, - (2011)
  • Application of bainitic structure for bearing steel and acceleration of transformation kinetics, ., 0, 0, - (2011)
  • 제일원리 계산을 통한 (Ti,M)C (M=Nb, V, Mo, W) 석출에 미치는 alloy 효과 분석, ., 0, 0, - (2011)
  • Effect of strain energy on the coalescence in low carbon steels, ., 0, 0, - (2011)
  • Effect of deformation on hydrogen behavior in TRIP steel, ., 0, 0, - (2011)
  • Si 첨가 저비중강 열간압연재의 미세조직에 따른 냉간연성의 변화, ., 0, 0, - (2011)
  • Role of Mo for TiC precipitation strengthening HSLA steel : A first-principle study, ., 0, 0, - (2011)
  • Austenite stability and mechanical behavior of Al-containing low carbon, manganese transformation-induced plasticity steels, ., 0, 0, - (2011)
  • Anisotropy of Charpy properties in API X80 steels, ., 0, 0, - (2010)
  • Plastic strain and varinat selection during diffusional transformation in steels, ., 0, 0, - (2010)
  • Strain partitioning of retained austenite in TRIP steels, ., 0, 0, - (2010)
  • The effect of external stress on the crystallographic relationship and variant selection of ferrite during diffusional transformation, ., 0, 0, - (2010)
  • Design of low carbon, low temperature bainite, ., 0, 0, - (2010)
  • Microstructural effect on the stability of retained austenite in Mn TRIP steels, ., 0, 0, - (2010)
  • The in-situ observation of coalesced bainite, ., 0, 0, - (2010)
  • Effect of retained austentie on strain hardening behavior of TRIP steel, ., 0, 0, - (2009)
  • Controlling mechanical balance of advanced multiphase transformation-induced plasticity steel, ., 0, 0, - (2009)
  • Microstructure and mechanical proeprties of 7Mn multiphas steel, ., 0, 0, - (2009)
  • Microstructure and tensile behavior of metastable austenitic steels with high Mn content, ., 0, 0, - (2008)
  • Effect of alloying elements and austenitizing temperature on hardenability of low carbon boron added steels, ., 0, 0, - (2008)

단행본

연구실적

  • 베어링강 최종 미세조직으로서의 베이나이트 적용 가능성 및 변태 가속화 연구, (주)포스코 (2010-2010)
  • 고탄소강의 베이나이트 변태거동 해석, 포항공대산학협력단 (2010-2010)
  • 인건비풀링과제, 포항공과대학교 (2011-2015)
  • FABRICATION OF CERAMIC-STEEL MATRIX COMPOSITE WITH IN-SITU PYROLYSIS REACTION IN MOLTEN STEEL, 포항공대산학협력단 (2011-2012)
  • (포항) CHQ재 원가 절감을 위한 저원가 성분설계 기술 (1/1), (주)포스코 (2011-2012)
  • 가열로 온도이력에 따른 합금 탄질화물 고용 거동 정량화, (주)포스코 (2012-2013)
  • 잔류 오스테나이트 형상제어를 통한 고강도 BAINITE-TRIP강 개발 가능성 탐색 연구, (주)포스코 (2012-2013)
  • 고AL계 고강도강의 확산 및 산화거동 연구, (주)포스코 (2012-2013)
  • FE-P-X강의 성분 및 열연 조건에 따른 미세조직 분석 및 현상 규명, (주)포스코 (2013-2013)
  • 준안정 오스테나이트 상의 미세조직 분석 및 현상 규명 탐색 연구, (주)포스코 (2013-2014)
  • AUSFORMING에 의한 스프링강의 기계적 특성 변화 거동 규명, (주)포스코 (2013-2014)
  • MODELLING HYDROGEN DESORPTION IN STEELS FROM MULTIPLE TRAPPING SOURCES: TOWARDS THE DESIGN OF HYDROGEN-RESISTANT STEELS, 포항공대산학협력단 (2013-2014)
  • (전사) 가열로 온도이력에 따른 합금 탄질화물 고용 거동 정량화 (2 / 2), (주)포스코 (2014-2015)
  • 초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, (주)포스코 (2014-2015)
  • 열간압연 공정에서의 표면산화거동 예측 모델 개발, (주)포스코 (2014-2015)
  • XRD PEAK 분석에 의한 강재 내 전위밀도 평가, 포항공대산학협력단 (2014-2015)
  • 준안정 오스테나이트 활용을 위한 합금원소 영향 연구, (주)포스코 (2014-2015)
  • 고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2014-2015)
  • 냉각중 상변태에 의한 고탄소강 변태발열 정합도 향상 연구, (주)포스코 (2014-2015)
  • 초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, (주)포스코 (2015-2016)
  • 열간압연 공정에서의 표면산화거동 예측 모델 개발, (주)포스코 (2015-2016)
  • 강재 내 수소거동 모델링 연구 동향 조사 연구, 포항공대산학협력단 (2015-2016)
  • 고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2015-2016)
  • 고온 구조용 경량 내열 FE계 금속복합소재 특성 최적화, (주)대화알로이테크 (2015-2016)
  • 연구개발과제[2015년 신설], 포항공과대학교 (2015-2036)
  • 4.11219_1차년도 이월, (주)대화알로이테크 (2015-2016)
  • 고망간 TWIP강의 저온 부식 특성 및 수소 취화거동 해석, 포항공대산학협력단 (2015-2016)
  • 베이나이트계 장수명 베어링강 및 스프링강 타당성 연구(미래혁신과 FEASIBILITY STUDY), (주)포스코 (2015-2016)
  • 초기조직에 따른 AHSS 소둔미세조직 및 PARTITIONING 거동 연구, (주)포스코 (2016-2017)
  • [기술개발비과제]초고강도 고성형성 강판 제조 기술 개발 동향 조사 연구, 포항공대산학협력단 (2016-2017)
  • 열간압연 공정에서의 표면산화거동 예측 모델 개발, (주)포스코 (2016-2017)
  • 1180급 TRIP 및 DP 강의 수소유기파괴에 미치는 NB의 영향, CBMM (2016-2018)
  • SI함유 고경도강의 실험실적 제조 및 평가, 국방과학연구소 (2016-2019)
  • 고온구조용 경량 내열 FE계 금속복합소재 개발, (주)대화알로이테크 (2016-2017)
  • 오스테나이트계 고MN강의 석출 강화 기구 해석, (주)포스코 (2016-2017)
  • 나노 베이나이트 기반 기가급 강재 개발 탐색 연구, (주)포스코 (2017-2018)
  • [기술개발비]초고강도 강판의 수소취성 연구 동향 조사연구, 포항공대산학협력단 (2017-2018)
  • EG 1180 TRIP강의 수소지연파괴 MECHANISM 및 추가 공정 조건에 따른 영향 규명, (주)포스코 (2017-2018)
  • 석출물이 중망간강의 기계적 물성에 미치는 영향 연구, (주)포스코 (2017-2018)
  • 공정조건에 따른 AHSS 선택산화 모델링, (주)포스코 (2017-2018)
  • 오스테나이트계 고MN강의 석출 강화 기구 해석, (주)포스코 (2017-2018)
  • 열연 고탄소강 탈탄 및 내부산화 발생 MECHANISM 연구, (주)포스코 (2018-2019)
  • 고탄소 TRIP강의 미세조직이 성형성에 미치는 영향도 규명 (1/2), (주)포스코 (2018-2019)
  • 1.2GPA급 비도금 기가스틸의 산세 및 소둔 조건에 따른 강종 내 확산성 수소 거동 분석, (주)포스코 (2018-2019)
  • 미래사회 기반 구조용 금속소재 강건/스마트 설계 기술, 한국기계연구원부설재료연구소 (2018-2018)
  • 학생인건비통합관리과제, 포항공대산학협력단 (2019-2040)
  • FE-17% 방진합금의 상변태 기구 분석, (주)포스코 (2018-2019)
  • 기가급 TRIP강 소둔로 내 이슬점 제어를 통한 표층부 탈탄 및 산화 거동 모델링, (주)포스코 (2019-2020)
  • HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강의 물성 상관관계 해석(장기기초과제), (주)포스코 (2019-2020)
  • 고탄소 TRIP강의 미세조직이 성형성에 미치는 영향, (주)포스코 (2019-2020)
  • [4.17560_기술개발]기가급 TRIP강 소둔로 내 이슬점 제어를 통한 표층부 탈탄 및 산화 거동 모델링, 포항공대산학협력단 (2019-2020)
  • [4.17561_기술개발]HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강, 포항공대산학협력단 (2019-2020)
  • [4.17565_기술개발]고탄소 TRIP강의 미세조직이 성형성에 미치는 영향, 포항공대산학협력단 (2019-2020)
  • 미래사회 기반 구조 금속소재 내수소 강건화 기술, 한국기계연구원부설재료연구소 (2019-2019)
  • 기가스틸 전착도장 시 수소 거동 MECHANISM 규명, (주)포스코 (2019-2020)
  • [4.18330_기술개발]기가스틸 전착도장 시 수소거동 MECHANISM 규명, 포항공대산학협력단 (2019-2020)
  • 780-980 급 DP 강의 가공경화 및 굽힘성, 연성에 미치는 NB 첨가의 영향, CBMM (2019-2020)
  • 고강도 스프링강의 수소취성에 미치는 NB 첨가의 영향, CBMM (2019-2020)
  • HETEROGENEOUS 미세조직을 갖는 초고강도 고연신 MART강의 물성 상관관계 해석(장기기초과제), (주)포스코 (2020-2021)
  • 초고강도 복합조직강의 기계적 물성에 미치는 열처리 공정 영향 해석, 우석문화재단 (2020-2021)
  • [4.19459]불균일 미세조직을 갖는 초고강도강의 물성에 미치는 합금서문 영, 포항공대산학협력단 (2020-2021)
  • 1.2GPA급 기가스틸 SCC(STRESS CORROSION CRACKING)에 미치는 강내 함유 CR과 중MN의 영향 분석, (주)포스코 (2020-2021)
  • 유럽향 1.2GPA급 기가스틸의 高성형성 확보를 위한 미세조직 및 성분설계 연구, (주)포스코 (2020-2021)
  • [4.19972_기술개발]복합조직 기가스틸 성형성에 미치는 미세조직 인자 연, 포항공대산학협력단 (2020-2021)
  • [4.19971_기술개발]초고강도강의 수소취성에 미치는 강중 합금원소의 영향, 포항공대산학협력단 (2020-2021)
  • 증기터빈 로터블레이드용 630 OC급 페라이트계 내열강 및 부품 개발, 한국산업기술평가관리원 (2020-2020)

IP

  • 이후철,허윤욱,서동우, 합금원소 분배에 의한 강재의 결정립 미세화 방법, 한국, 10-2013-0109722 (2013)