Research Highlights

Hourglass-shaped Silicon Nanowire Photodiodes with Increased Absorption of Light Developed

2019-11-13 622

[The research team led by Professor Chang-Ki Baek proposed novel vertical silicone nanowires with high sensitivity by using silicone and semiconductor process]

191114_연구성과_상세_백창기교수_김기현교수_서명해씨_윤솔씨(영문)

The near-infrared light is a light source with the shortest wavelength among the infrared light, and indicated outside of the red color of visible light. The near-infrared light has been widely used in optical communications, medical lasers, LiDAR*1 of self-driving vehicles, and security and surveillance instruments, ranging from private to defense industry. To utilize this near-infrared light, the technology that converts light into an electrical energy through a photodetector is crucial. The research team from POSTECH successfully developed a photodiode with increased absorption of the near-infrared light by using the hourglass-shaped silicon nanowire array.

The research team was led by Professor Chang-Ki Baek and consisted of a research professor, Kihyun Kim, Myunghae Seo of Creative IT Engineering and Sol Yoon of Electrical Engineering. The team developed hourglass-shaped silicon nanowires to enhance photoresponse while using the conventional semiconductor process. Their establishment was published in the world’s most renowned respected journal of electronics engineering, Nature Electronics on November 5.

Before their finding, the near-infrared photodiodes were primarily made of chemical materials. For this reason, it required a separate cooler due to the noise, and high production cost when making into a large area. It was also very difficult to integrate. To overcome these difficulties of chemical materials, the team used silicon instead. Furthermore, they suggested to use hourglass-shaped silicon nanowires to increase silicon’s absorptance of the near-infrared light.

As a small sound in the dome is transmitted completely to the opposite side, the same phenomenon occurs in the inverted-cone-shaped upper part of the hourglass-shaped silicon nanowire, which is called whispering-gallery-mode resonance*2. So, the near-infrared light rotates along the diameter of nanowires and is absorbed. Thus, it is effective in extending wavelength of light. Also, the cone-shaped lower part of the hourglass-shaped silicon nanowires has its diameter size gradually enlarged in the vertical direction where the difference of reflectance between air and silicon is progressively increased. This makes it effectively reabsorb the light source reflected and/or penetrated from the upper part of the hourglass-shaped silicon nanowires.

The research team proved that the hourglass-shaped silicon-nanowire photodiodes illustrated 29% increased near-infrared photoreseponse at wavelength of 1,000nm in comparison to the existing planar type silicon photodiode. In addition, this newly developed photodiode was applied to a mobile heart-rate measurement system for demonstration. By doing this, they verified and confirmed of its commercialization when it demonstrated larger wave of heart rate, and less than 1% of error rate compared to the existing mobile hear-rate measurement system.

Professor Chang-Ki Baek who led this research said in his comment, “this study used the existing silicon processes that can be produced in mass at low cost and 100% compatible to the semiconductor production. It is very meaningful in that we were able to demonstrate increased photoresponse of the near-infrared light at the wavelength where the existing silicon hardly detect. It is possible that the developed device can optimize the absorption of the near-infrared wavelength desired according to the structure of nanowires such as diameter, length, and pitch. It is expected to provide optical solutions to various fields such as LiDAR of a self-driving vehicles, medical laser, military night vision goggles, image sensors and more.”

The research was supported by the MSIT (Ministry of Science and ICT), Korea, under the ICT Consilience Creative program supervised by the IITP (Institute for Information & communications Technology Planning & Evaluation)
 


1. Light Detection and Ranging, LiDAR
LiDAR is a remote sensing method that measures distance to a target by illuminating the target with laser light and measuring the reflected light with a sensor. What makes it different from the conventional method is that it uses light instead of radio wave.

2. Whispering-Gallery Mode Resonance
It is a phenomenon that sound at specific wavelength or light source can travel along the surface of a space without losing energy while forming standing wave to dwell in a closed space with concave surface for a long time.